312 research outputs found
Transformation bending device emulated by graded-index waveguide
We demonstrate that a transformation device can be emulated using a
gradient-index waveguide. The effective index of the waveguide is spatially
varied by tailoring a gradient thickness dielectric waveguide. Based on this
technology, we demonstrate a transformation device guiding visible light around
a sharp corner, with low scattering loss and reflection loss. The experimental
results are in good agreement with the numerical results.Comment: This paper is published at Optics Express 20, 13006 (2012
Numerical Investigation of Local Heat-Release Rates and Thermo-Chemical States in Side-Wall Quenching of Laminar Methane and Dimethyl Ether Flames
The local heat-release rate and the thermo-chemical state of laminar methane and dimethyl ether flames in a side-wall quenching configuration are analyzed. Both, detailed chemistry simulations and reduced chemistry manifolds, namely Flamelet-Generated Manifolds (FGM), Quenching Flamelet-generated Manifolds (QFM) and Reaction-Diffusion Manifolds (REDIM), are compared to experimental data of local heat-release rate imaging of the lab-scale side-wall quenching burner at Technical University of Darmstadt. To enable a direct comparison between the measurements and the numerical simulations, the measurement signals are computed in all numerical approaches. Considering experimental uncertainties, the detailed chemistry simulations show a reasonable agreement with the experimental heat-release rate. The comparison of the FGM, QFM and REDIM with the detailed simulations shows the high prediction quality of the chemistry manifolds. For the first time, the thermo-chemical state during quenching of a dimethyl ether-air flame is examined numerically. Therefore, the carbon monoxide and temperature predictions are analyzed in the vicinity of the wall. The obtained results are consistent with previous studies for methane- air flames and extend these findings to more complex oxygenated fuels. Furthermore, this work presents the first comparison of the QFM and the REDIM in a side-wall quenching burner
Comparative Responses in Lung Function Measurements with Tiotropium in Adolescents and Adults, and Across Asthma Severities:A Post Hoc Analysis
INTRODUCTION: Airway obstruction is usually assessed by measuring forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC) and peak expiratory flow (PEF). This post hoc study investigated comparative responses of lung function measurements in adults and adolescents (full analysis set, N = 3873) following treatment with tiotropium Respimat®. METHODS: Lung function outcomes were analysed from five phase III trials in adults (≥ 18 years) with symptomatic severe, moderate and mild asthma (PrimoTinA-asthma®, MezzoTinA-asthma® and GraziaTinA-asthma®, respectively), and one phase III trial in adolescents (12-17 years) with symptomatic moderate asthma (RubaTinA-asthma®). Changes from baseline versus placebo in FEV1, FVC, PEF and FEV1/FVC ratio with tiotropium 5 µg or 2.5 µg added to at least stable inhaled corticosteroids at week 24 (week 12 in GraziaTinA-asthma) were analysed. RESULTS: All lung function measures improved in all studies with tiotropium 5 µg (mean change from baseline versus placebo), including peak FEV1 (110-185 mL), peak FVC (57-95 mL) and morning PEF (15.8-25.6 L/min). Changes in adolescents were smaller than those in adults, and were statistically significant primarily for FEV1 and PEF, but not for FVC. CONCLUSION: Consistent improvements were seen across all lung function measures with the addition of tiotropium to other asthma treatments in adults across all severities, whereas the improvements with tiotropium in adolescents primarily impacted measures of flow rather than lung volume. This may reflect less pronounced airway remodelling and air trapping in adolescents with asthma versus adults
Plasmonic Luneburg and Eaton Lenses
Plasmonics is an interdisciplinary field focusing on the unique properties of
both localized and propagating surface plasmon polaritons (SPPs) -
quasiparticles in which photons are coupled to the quasi-free electrons of
metals. In particular, it allows for confining light in dimensions smaller than
the wavelength of photons in free space, and makes it possible to match the
different length scales associated with photonics and electronics in a single
nanoscale device. Broad applications of plasmonics have been realized including
biological sensing, sub-diffraction-limit imaging, focusing and lithography,
and nano optical circuitry. Plasmonics-based optical elements such as
waveguides, lenses, beam splitters and reflectors have been implemented by
structuring metal surfaces or placing dielectric structures on metals, aiming
to manipulate the two-dimensional surface plasmon waves. However, the abrupt
discontinuities in the material properties or geometries of these elements lead
to increased scattering of SPPs, which significantly reduces the efficiency of
these components. Transformation optics provides an unprecedented approach to
route light at will by spatially varying the optical properties of a material.
Here, motivated by this approach, we use grey-scale lithography to
adiabatically tailor the topology of a dielectric layer adjacent to a metal
surface to demonstrate a plasmonic Luneburg lens that can focus SPPs. We also
realize a plasmonic Eaton lens that can bend SPPs. Since the optical properties
are changed gradually rather than abruptly in these lenses, losses due to
scattering can be significantly reduced in comparison with previously reported
plasmonic elements.Comment: Accepted for publication in Nature Nanotechnolog
Interaction between localized and delocalized surface plasmon polariton modes in a metallic photonic crystal
We experimentally and theoretically study the controlled coupling between localized and delocalized surface plasmon modes supported by a multilayer metallic photonic crystal slab. The model system to visualize the interaction phenomena consists of a gold nanowire grating and a spatially separated homogeneous silver film. We show that plasmon-plasmon coupling leads to drastic modification of the optical properties in dependence on the chosen geometrical parameters. Strong coupling and plasmon hybridization can be clearly observed. The numerical calculations reveal excellent agreement with the experiments. (c) 2006 WILEY-VCH Verlag GmbH & Co. KGa-A, Weinheim
N-Glycosylation of Carnosinase Influences Protein Secretion and Enzyme Activity: Implications for Hyperglycemia
OBJECTIVE-The (CTG)(n) polymorphism in the serum carnosinase (CN-1) gene affects CN-1 secretion Since CN-1 is heavily glycosylated and glycosylation might influence protein secretion as well, we tested the role of N-glycosylation for CN-1 secretion and enzyme activity. We also tested whether CN-1 secretion is changed under hyperglycemic conditions. RESULTS-N-glycosylation of CN-1 was either inhibited by tunicamycin in pCSII-CN-1-transfected Cos-7 cells or by stepwise deletion of its three putative N-glycosylation sites. CN-1 protein expression, N-glycosylation, and enzyme activity were assessed in cell extracts and supernatants. The influence of hyperglycemia on CN-1 enzyme activity in human serum was tested in homozygous (CTG)(5) diabetic patients and healthy control subjects Tunicamycin completely inhibited CN-1 secretion Deletion of all N-glycosylation sites was required to reduce CN-1 secretion efficiency. Enzyme activity was already diminished when two sites were deleted. In pCSII-CN-1-transfected Cos-7 cells cultured in medium containing 25 mmol/l D-glucose, the immature 61 kilodaltons (kDa) CN-1 immune reactive band was not detected. This was paralleled by an increased GlcNAc expression in cell lysates and CN-1 expression in the supernatants. Homozygous (CTG)(5) diabetic patients had significantly higher serum CN-1 activity compared with genotype-matched, healthy control subjects CONCLUSIONS-We conclude that apart from the (CTG)(n) polymorphism in the signal peptide of CN-1, N-glycosylation is essential for appropriate secretion and enzyme activity. Since hyperglycemia enhances CN-1 secretion and enzyme activity, our data suggest that poor blood glucose control in diabetic patients might result in an increased CN-1 secretion even in the presence of the (CTG)(5) allele Diabetes 59:1984-1990, 201
Controlling the coupling between localized and delocalized surface plasmon modes in a metallic photonic crystal slab
Small intestinal mucosa expression of putative chaperone fls485
<p>Abstract</p> <p>Background</p> <p>Maturation of enterocytes along the small intestinal crypt-villus axis is associated with significant changes in gene expression profiles. <it>fls485 </it>coding a putative chaperone protein has been recently suggested as a gene involved in this process. The aim of the present study was to analyze <it>fls48</it>5 expression in human small intestinal mucosa.</p> <p>Methods</p> <p><it>fls485 </it>expression in purified normal or intestinal mucosa affected with celiac disease was investigated with a molecular approach including qRT-PCR, Western blotting, and expression strategies. Molecular data were corroborated with several <it>in situ </it>techniques and usage of newly synthesized mouse monoclonal antibodies.</p> <p>Results</p> <p>fls485 mRNA expression was preferentially found in enterocytes and chromaffine cells of human intestinal mucosa as well as in several cell lines including Rko, Lovo, and CaCo2 cells. Western blot analysis with our new anti-fls485 antibodies revealed at least two fls485 proteins. In a functional CaCo2 model, an increase in fls485 expression was paralleled by cellular maturation stage. Immunohistochemistry demonstrated fls485 as a cytosolic protein with a slightly increasing expression gradient along the crypt-villus axis which was impaired in celiac disease Marsh IIIa-c.</p> <p>Conclusions</p> <p>Expression and synthesis of fls485 are found in surface lining epithelia of normal human intestinal mucosa and deriving epithelial cell lines. An interdependence of enterocyte differentiation along the crypt-villus axis and fls485 chaperone activity might be possible.</p
A Carpet Cloak Device for Visible Light
We report an invisibility carpet cloak device, which is capable of making an
object undetectable by visible light. The cloak is designed using quasi
conformal mapping and is fabricated in a silicon nitride waveguide on a
specially developed nano-porous silicon oxide substrate with a very low
refractive index. The spatial index variation is realized by etching holes of
various sizes in the nitride layer at deep subwavelength scale creating a local
effective medium index. The fabricated device demonstrates wideband
invisibility throughout the visible spectrum with low loss. This silicon
nitride on low index substrate can also be a general scheme for implementation
of transformation optical devices at visible frequency
- …