9,954 research outputs found
Quantum interference by two temporally distinguishable pulses
We report a two-photon interference effect, in which the entangled photon
pairs are generated from two laser pulses well-separated in time. In a single
pump pulse case, interference effects did not occur in our experimental scheme.
However, by introducing a second pump pulse delayed in time, quantum
interference was then observed. The visibility of the interference fringes
shows dependence on the delay time between two laser pulses. The results are
explained in terms of indistinguishability of biphoton amplitudes which
originated from two temporally separated laser pulses.Comment: two-column, 4pages, submitted to PRA, minor change
GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 2: User's manual and program listing
An efficient computer program, called GRID2D/3D, was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. The theory and method used in GRID2D/3D is described
GRID2D/3D: A computer program for generating grid systems in complex-shaped two- and three-dimensional spatial domains. Part 1: Theory and method
An efficient computer program, called GRID2D/3D was developed to generate single and composite grid systems within geometrically complex two- and three-dimensional (2- and 3-D) spatial domains that can deform with time. GRID2D/3D generates single grid systems by using algebraic grid generation methods based on transfinite interpolation in which the distribution of grid points within the spatial domain is controlled by stretching functions. All single grid systems generated by GRID2D/3D can have grid lines that are continuous and differentiable everywhere up to the second-order. Also, grid lines can intersect boundaries of the spatial domain orthogonally. GRID2D/3D generates composite grid systems by patching together two or more single grid systems. The patching can be discontinuous or continuous. For continuous composite grid systems, the grid lines are continuous and differentiable everywhere up to the second-order except at interfaces where different single grid systems meet. At interfaces where different single grid systems meet, the grid lines are only differentiable up to the first-order. For 2-D spatial domains, the boundary curves are described by using either cubic or tension spline interpolation. For 3-D spatial domains, the boundary surfaces are described by using either linear Coon's interpolation, bi-hyperbolic spline interpolation, or a new technique referred to as 3-D bi-directional Hermite interpolation. Since grid systems generated by algebraic methods can have grid lines that overlap one another, GRID2D/3D contains a graphics package for evaluating the grid systems generated. With the graphics package, the user can generate grid systems in an interactive manner with the grid generation part of GRID2D/3D. GRID2D/3D is written in FORTRAN 77 and can be run on any IBM PC, XT, or AT compatible computer. In order to use GRID2D/3D on workstations or mainframe computers, some minor modifications must be made in the graphics part of the program; no modifications are needed in the grid generation part of the program. This technical memorandum describes the theory and method used in GRID2D/3D
Two-photon interference with thermal light
The study of entangled states has greatly improved the basic understanding
about two-photon interferometry. Two-photon interference is not the
interference of two photons but the result of superposition among
indistinguishable two-photon amplitudes. The concept of two-photon amplitude,
however, has generally been restricted to the case of entangled photons. In
this letter we report an experimental study that may extend this concept to the
general case of independent photons. The experiment also shows interesting
practical applications regarding the possibility of obtaining high resolution
interference patterns with thermal sources.Comment: Added reference 1
Evaluation of Boundary Conditions for the Gust-Cascade Problem
Using a high-order accuracy finite-difference time-domain algorithm, the acoustic scattering from a flat-plate cascade is computed. Keeping the grid and time step fixed, the effect of four different boundary conditions on the accuracy and stability of the computed solution is compared
Effect of Coannular Flow on Linearized Euler Equation Predictions of Jet Noise
An improved version of a previously validated linearized Euler equation solver is used to compute the noise generated by coannular supersonic jets. Results for a single supersonic jet are compared to the results from both a normal velocity profile and an inverted velocity profile supersonic jet
Measurement of the Dynamical Structure Factor of a 1D Interacting Fermi Gas
We present measurements of the dynamical structure factor of an
interacting one-dimensional (1D) Fermi gas for small excitation energies. We
use the two lowest hyperfine levels of the Li atom to form a
pseudo-spin-1/2 system whose s-wave interactions are tunable via a Feshbach
resonance. The atoms are confined to 1D by a two-dimensional optical lattice.
Bragg spectroscopy is used to measure a response of the gas to density
("charge") mode excitations at a momentum and frequency . The
spectrum is obtained by varying , while the angle between two laser
beams determines , which is fixed to be less than the Fermi momentum
. The measurements agree well with Tomonaga-Luttinger theory
Three-dimensional Structure in a Supersonic Jet: Behavior near Centerline
The unsteady structure of a supersonic jet is highly three dimensional, though the mean flow is axisymmetric. In simulating a circular jet, the centerline represents a computational boundary. As such, spurious modes can be generated near centerline, unless special attention is given to the behavior of the 3D structure near the centerline. Improper treatment of the dependent variables near the centerline results in the solution diverging or being suitable only for small amplitude excitation. With a careful treatment of the centerline formation, no spurious mode is generated. The results show that a near-linear disturbance growth is obtained, as the linear stability theory indicates. At high levels of excitation, nonlinear development of disturbances is evident and saturation is reached downstream
Time-bin entangled photon holes
The general concept of entangled photon holes is based on a correlated
absence of photon pairs in an otherwise constant optical background. Here we
consider the specialized case when this background is confined to two
well-defined time bins, which allows the formation of time-bin entangled photon
holes. We show that when the typical coherent state background is replaced by a
true single-photon (Fock state) background, the basic time-bin entangled
photon-hole state becomes equivalent to one of the time-bin entangled
photon-pair states. We experimentally demonstrate these ideas using a
parametric down-conversion photon-pair source, linear optics, and
post-selection to violate a Bell inequality with time-bin entangled photon
holes.Comment: 6 pages, 5 figure
Evaluation of Boundary Conditions for Computational Aeroacoustics
The performance of three boundary conditions for aeroacoustics were investigated, namely, (1) Giles-1990; (2) Tam and Webb-1993, and (3) Thompson-1987. For each boundary condition, various implementations were tested to study the sensitivity of their performance to the implementation procedure. Details of all implementations are given. Results are shown for the acoustic field of a monopole in a uniform freestream
- …