529 research outputs found
Intrinsic and extrinsic decay of edge magnetoplasmons in graphene
We investigate intrinsic and extrinsic decay of edge magnetoplasmons (EMPs)
in graphene quantum Hall (QH) systems by high-frequency electronic
measurements. From EMP resonances in disk shaped graphene, we show that the
dispersion relation of EMPs is nonlinear due to interactions, giving rise to
intrinsic decay of EMP wavepacket. We also identify extrinsic dissipation
mechanisms due to interaction with localized states in bulk graphene from the
decay time of EMP wavepackets. We indicate that, owing to the unique linear and
gapless band structure, EMP dissipation in graphene can be lower than that in
GaAs systems.Comment: 5 page
Mediated Ciphertext-Policy Attribute-Based Encryption and its Application (extended version)
In Ciphertext-Policy Attribute-Based Encryption (CP-ABE), a user secret key is associated with a set of attributes, and the ciphertext is associated with an access policy over attributes. The user can decrypt the ciphertext if and only if the attribute set of his secret key satisfies the access policy specified in the ciphertext. Several CP-ABE schemes have been proposed, however, some practical problems, such as attribute revocation, still needs to be addressed. In this paper, we propose a mediated Ciphertext-Policy Attribute-Based Encryption (mCP-ABE) which extends CP-ABE with instantaneous attribute revocation. Furthermore, we demonstrate how to apply the proposed mCP-ABE scheme to securely manage Personal Health Records (PHRs)
Leprosy in the Modern Era
Leprosy is a chronic infective disease that originates from the presence of pathogen agent Mycobacterium leprae. Mycobacterium leprae was discovered by the Norwegian doctor Gerhard Henrik Armauer Hansen in 1873. For the zoonotic transmission of M. leprae in the US the responsible insects are armadillos (Dasypus novemcinctus). M. leprae is an intracellular microorganism leading to loss of sensibility, innervation, intraepidermal impairment and lesions due to the absence of myelin in Schwann cells. Mycobacterium leprae has high infectivity and low pathogenicity. Incubation period is from 2 to 7 years. Leprosy is an infectious neurodegenerative disorder of the peripheral nervous system. Leprosy is the major cause of human disability due to neurological damage. Leprosy still represents one of the major causes of disabilities in humans. The most common complications are muscle weakness leading to atrophy, bone loss, amputations and blindness. In the case of chronic cutaneous hyperalgesia, there is a local increase in NGF levels. The application of anti-NGF antibodies may be of benefit in treating hyperalgesia in patients with neuropathy and impaired nerve endings. If combined, NGF, NT-3 and glial cell-line derived neurotrophic factor may be sustainable. In over 90% of human individuals an overall genetic resistance has been noted
Recommended from our members
Catalytic Activity of Supported Metal Particles for Sulfuric Acid Decomposition Reaction
Production of hydrogen by splitting water in thermochemical water-splitting cycles, such as the sulfur-based group that employs the catalytic decomposition of sulfuric acid into SO2 and O2 is of considerable interest. Most of these processes occur at high temperatures (T = 1,000 K) and exposes catalysts to the extreme conditions such as steam, oxygen, and acid vapor that severely damage these catalysts within a short time. To develop an understanding of the factors that cause catalyst deactivation, we performed density-functional-theory (DFT)-based first-principles calculations and computer simulations for transition metal (TM) particles positioned on the two types of substrate (?-alumina and TiO2-rutile). The catalytic activity of the considered systems is defined by several factors, namely: (i) The efficiency of detaching oxygen atoms from the sulfur-containing species SOn (n = 1,2,3). The breaking of the S-O bonds may occur at both the substrate and the transition metal cluster. However, the bond-breaking at the substrate is endothermic (and takes about 1.5 eV per bond) while at low-coordinated metal atom of a cluster it is exothermic (with energy gain of about 0.5 eV per bond). This explains why the presence of transition metal clusters is necessary for catalytic activity; (ii) The ability of the cluster to “clean” itself, i.e., to eliminate oxygen from its surface, in order to regain the catalytically active sites and to continue the process. We found that the clusters of Pd and Pt with the size = 2-3 nm are more efficient in this process (at T = 1,000 K) than the clusters of other TM’s considered (Rh, Ir, Ru, and Os); (iii) The ability of the cluster to keep its size to avoid sintering (that reduces the number of low-coordinated catalytically active sites at the surface of the cluster). We found that the sintering of Rh, Ir, Ru, and Os clusters is significantly suppressed in comparison with the sintering of Pd and Pt clusters of the same size (the individual atoms at the surface of Rh and Ir clusters have a tendency to have higher coordination number, i.e., the detachment of individual atoms from the surface is less likely). Therefore, the activity of TM nanoparticles is mainly defined by the competing factors (ii) and (iii). At the present, we try to find (experimentally and theoretically) the most optimal combination of the structure, size, and composition of TM nanoparticles, for which the catalytic activity of sulfuric acid decomposition will be the highest
Within study comparisons and risk of bias in international development: Systematic review and critical appraisal
Background Many systematic reviews incorporate nonrandomised studies of effects, sometimes called quasi‐experiments or natural experiments. However, the extent to which nonrandomised studies produce unbiased effect estimates is unclear in expectation or in practice. The usual way that systematic reviews quantify bias is through “risk of bias assessment” and indirect comparison of findings across studies using meta‐analysis. A more direct, practical way to quantify the bias in nonrandomised studies is through “internal replication research”, which compares the findings from nonrandomised studies with estimates from a benchmark randomised controlled trial conducted in the same population. Despite the existence of many risks of bias tools, none are conceptualised to assess comprehensively nonrandomised approaches with selection on unobservables, such as regression discontinuity designs (RDDs). The few that are conceptualised with these studies in mind do not draw on the extensive literature on internal replications (within‐study comparisons) of randomised trials. Objectives Our research objectives were as follows: Objective 1: to undertake a systematic review of nonrandomised internal study replications of international development interventions. Objective 2: to develop a risk of bias tool for RDDs, an increasingly common method used in social and economic programme evaluation. Methods We used the following methods to achieve our objectives. Objective 1: we searched systematically for nonrandomised internal study replications of benchmark randomised experiments of social and economic interventions in low‐ and middle‐income countries (L&MICs). We assessed the risk of bias in benchmark randomised experiments and synthesised evidence on the relative bias effect sizes produced by benchmark and nonrandomised comparison arms. Objective 2: We used document review and expert consultation to develop further a risk of bias tool for quasi‐experimental studies of interventions (ROBINS‐I) for RDDs. Results Objective 1: we located 10 nonrandomised internal study replications of randomised trials in L&MICs, six of which are of RDDs and the remaining use a combination of statistical matching and regression techniques. We found that benchmark experiments used in internal replications in international development are in the main well‐conducted but have “some concerns” about threats to validity, usually arising due to the methods of outcomes data collection. Most internal replication studies report on a range of different specifications for both the benchmark estimate and the nonrandomised replication estimate. We extracted and standardised 604 bias coefficient effect sizes from these studies, and present average results narratively. Objective 2: RDDs are characterised by prospective assignment of participants based on a threshold variable. Our review of the literature indicated there are two main types of RDD. The most common type of RDD is designed retrospectively in which the researcher identifies post‐hoc the relationship between outcomes and a threshold variable which determines assignment to intervention at pretest. These designs usually draw on routine data collection such as administrative records or household surveys. The other, less common, type is a prospective design where the researcher is also involved in allocating participants to treatment groups from the outset. We developed a risk of bias tool for RDDs. Conclusions Internal study replications provide the grounds on which bias assessment tools can be evidenced. We conclude that existing risk of bias tools needs to be further developed for use by Campbell collaboration authors, and there is a wide range of risk of bias tools and internal study replications to draw on in better designing these tools. We have suggested the development of a promising approach for RDD. Further work is needed on common methodologies in programme evaluation, for example on statistical matching approaches. We also highlight that broader efforts to identify all existing internal replication studies should consider more specialised systematic search strategies within particular literatures; so as to overcome a lack of systematic indexing of this evidence
Recommended from our members
Catalyst Activity and Post-operation Analyses of Pt/TiO2 (Rutile) Catalysts Used in the Sulfuric Acid Decomposition Reaction
Production of hydrogen by splitting of water at lower temperatures than by direct thermal decomposition can be achieved by a series of particular chemical reactions that establish a thermochemical cycle [1]. Among the high number of thermochemical water-splitting cycles proposed in the literature [2], the sulfur-based group is of considerable interest. All the sulfur-based cycles employ the catalytic decomposition of sulfuric acid into SO2 and O2. The produced O2 corresponds to the O2 generated from water in the overall cycle. Research performed at the Idaho National Laboratory [3] has found that even one of the most stables catalysts, Pt supported on low surface area titania, deactivates with time on stream (TOS). To develop an understanding of the factors that cause catalyst deactivation, samples of 1% Pt supported on titania (rutile) catalyst were submitted to flowing concentrated sulfuric acid at 1123 K and atmospheric pressure for different TOSs between 0 and 548 h and a number of chemical and spectroscopic analyses applied to the spent samples
Josephson Coupling and Fiske Dynamics in Ferromagnetic Tunnel Junctions
We report on the fabrication of Nb/AlO_x/Pd_{0.82}Ni_{0.18}/Nb
superconductor/insulator/ferromagnetic metal/superconductor (SIFS) Josephson
junctions with high critical current densities, large normal resistance times
area products, high quality factors, and very good spatial uniformity. For
these junctions a transition from 0- to \pi-coupling is observed for a
thickness d_F ~ 6 nm of the ferromagnetic Pd_{0.82}Ni_{0.18} interlayer. The
magnetic field dependence of the \pi-coupled junctions demonstrates good
spatial homogeneity of the tunneling barrier and ferromagnetic interlayer.
Magnetic characterization shows that the Pd_{0.82}Ni_{0.18} has an out-of-plane
anisotropy and large saturation magnetization, indicating negligible dead
layers at the interfaces. A careful analysis of Fiske modes provides
information on the junction quality factor and the relevant damping mechanisms
up to about 400 GHz. Whereas losses due to quasiparticle tunneling dominate at
low frequencies, the damping is dominated by the finite surface resistance of
the junction electrodes at high frequencies. High quality factors of up to 30
around 200 GHz have been achieved. Our analysis shows that the fabricated
junctions are promising for applications in superconducting quantum circuits or
quantum tunneling experiments.Comment: 15 pages, 9 figure
- …