2,090 research outputs found
The geometry and density of B-emission star disks from statistical analysis and numerical simulations
This thesis is divided into 3 investigations. First we present a novel method to estimate the opening angles of Be star disks from interferometric axis ratio measurements, using Bayesian statistics and Monte Carlo techniques. A large set of theoretical axis ratios generated from disk models were compared to observational samples to determine which distribution best reproduces the observations. We find that the observed axis ratio distributions in the K-, H-, and N-band can best be explained by the presence of thin disks while measurements over the H line point toward slightly thicker disks. Second, using a smoothed particle hydrodynamics (SPH) code, we studied the density structure of Be star disks in binary systems for a range of misalignment angles and disk viscosity. The truncation, warping, and density structure in the inner and outer parts of the disk are investigated. We find that these parameters affect both the truncation radius and the density of the outer disc, while the inner disk remains mostly unaffected. The scale height of our disks are also compared to analytical values. We find that the analytic values reproduces the scale height fairly well but underestimates the scale height in regions where density enhancements develop. Finally the shape and density structure of these enhancements were also investigated. We find that larger misalignment angles and viscosity values result in more tightly wound spiral arms with shallower density profiles. The orbital phase was shown to have very little effect on the structure of the spiral density enhancements
Alien Registration- Cormier, Cyr H. (Van Buren, Aroostook County)
https://digitalmaine.com/alien_docs/33142/thumbnail.jp
Alien Registration- Cyr, Mack H. (Saint John Plantation, Aroostook County)
https://digitalmaine.com/alien_docs/32726/thumbnail.jp
Alien Registration- Cyr, Henry H. (Fort Kent, Aroostook County)
https://digitalmaine.com/alien_docs/24593/thumbnail.jp
Turbine blade and vane heat flux sensor development, phase 2
The development of heat flux sensors for gas turbine blades and vanes and the demonstration of heat transfer measurement methods are reported. The performance of the heat flux sensors was evaluated in a cylinder in cross flow experiment and compared with two other heat flux measurement methods, the slug calorimeter and a dynamic method based on fluctuating gas and surface temperature. Two cylinders, each instrumented with an embedded thermocouple sensor, a Gardon gauge, and a slug calorimeter, were fabricated. Each sensor type was calibrated using a quartz lamp bank facility. The instrumented cylinders were then tested in an atmospheric pressure combustor rig at conditions up to gas stream temperatures of 1700K and velocities to Mach 0.74. The test data are compared to other measurements and analytical prediction
Development of heat flux sensors for turbine airfoils
The objectives of this program are to develop heat flux sensors suitable for installation in hot section airfoils of advanced aircraft turbine engines and to experimentally verify the operation of these heat flux sensors in a cylinder in a cross flow experiment. Embedded thermocouple and Gardon gauge sensors were developed and fabricated into both blades and vanes. These were then calibrated using a quartz lamp bank heat source and finally subjected to thermal cycle and thermal soak testing. These sensors were also fabricated into cylindrical test pieces and tested in a burner exhaust to verify heat flux measurements produced by these sensors. The results of the cylinder in cross flow tests are given
Development of advanced high-temperature heat flux sensors. Phase 2: Verification testing
A two-phase program is conducted to develop heat flux sensors capable of making heat flux measurements throughout the hot section of gas turbine engines. In Phase 1, three types of heat flux sensors are selected; embedded thermocouple, laminated, and Gardon gauge sensors. A demonstration of the ability of these sensors to operate in an actual engine environment is reported. A segmented liner of each of two combustors being used in the Broad Specification Fuels Combustor program is instrumented with the three types of heat flux sensors then tested in a high pressure combustor rig. Radiometer probes are also used to measure the radiant heat loads to more fully characterize the combustor environment. Test results show the heat flux sensors to be in good agreement with radiometer probes and the predicted data trends. In general, heat flux sensors have strong potential for use in combustor development programs
Study of the Growth of Entropy Modes in MSSM Flat Directions Decay: Constraints on the Parameter Space
We study how the resonant decay of moduli fields arising in the Minimal
Supersymmetric Standard Model (MSSM) could affect large scale curvature
perturbations in the early universe. It has been known for some time that the
presence of entropy perturbations in a multi-component system can act as seeds
for the curvature perturbations on all scales. These entropy perturbations
could be amplified exponentially if one of the moduli decays via stochastic
resonance, affecting the curvature power spectrum in the process. By imposing
the COBE normalization on this power spectrum, one could put constraints on the
masses and couplings of the underlying particle physics model without having to
rely on collider experiments. We discuss in detail the case of the MSSM but
this method could be applied to other theories beyond the Standard Model.Comment: 6 pages, 1 figure, revtex4, comments added in section II, 1 reference
adde
- …