Characterization of Siloxane-poly(methyl methacrylate) Hybrid Films Obtained on a Tinplate Substrate Modified by the Addition of Organic and Inorganic Acids

Tinplate is used to food packaging and other types of packages. The corrosion resistance of the tinplate has been study due the necessity of an alternative to high environmental impact of chromatization process. Therefore protective coatings as hybrid films base elaborations with different acids are studied to improve the barrier effect against corrosion. The objective of this work is characterize hybrid films deposited on a tinplate from a sol made up of the alkoxide precursors 3-(trimethoxysilylpropyl) methacrylate (TMSM), tetraethoxysilane (TEOS) and poly(methyl methacrylate) (PMMA) together with one of three acids (acetic, hydrochloric or nitric acid) and to verify their action against the corrosion of the substrate. The films were obtained by a dip-coating process and cured for 3 hours at 160 °C. The film hydrophobicity was determined by contact angle measurements, and the morphology was evaluated by SEM. FTIR measurements were performed to characterize the chemical structures of the films. The electrochemical behavior of the coatings was evaluated by techniques open circuit potential monitoring (OCP), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results demonstrate that the siloxane-PMMA films improve the protective properties of the tinplate, with the films obtained by acetic acid addition exhibiting the greatest improvement

FABRICATION AND CHARACTERIZATION OF POLYANILINE-GRAPHENE COMPOSITE AS ELECTRODE IN ELECTROCHEMICAL CAPACITOR

In this study, polyaniline-graphene composites with different nano-structures are synthesized and the behaviour of the obtained composites serving as electrode materials in electrochemical capacitors is studied. The morphology, crystal structure, and thermal stability of the composites are examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Thermal gravimetric analysis (TGA). Electrochemical properties are characterized by cyclic voltammetry (CV). According to the results, the obtained composites show different crystal structures and different thermal stabilities, and consequently different electrochemical capacities, when used as electrodes in electrochemical capacitors. A nano-fibre composite is shown to have a good degree of crystallization, 5.17% water content, 637oC degradation onset temperature, and 379 Fg-1 electrochemical capacity

Sol-gel based optically active phenolphthalein encapsulated nanomatrices for sensing application

In this work, synthesis and characterization of phenolphthalein-immobilized titania (T-phph) and silica–titania (ST-phph) nanomatrix is reported. The thin films are deposited by sol–gel method at low temperature. The effect of host–guest chemistry in matrices, on the surface structures, optical and sensing activity of the resultant thin films is studied. The phenolphthalein-immobilized fabricated nanoparticles/nanomatrices are analyzed by field emission scanning electron microscope, energy-dispersive X-ray spectroscopy, atomic-force microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, surface analysis, thermogravimetric analysis, and UV–Vis spectroscopy. Thermally stable and high surface area homogeneous nanoparticles, containing nanocrystalline anatase phase with low refractive index (1.58), low roughness (5.5 nm), and high transparency (95 %) are obtained for phenolphthalein-immobilized ST-phph nanomatrix. Moreover, smaller nanoparticles (56–121 nm) with good incorporation of dye and good response of sensing are obtained. The sensor response is optimized at pH 12 with 10.1 pKa value at 555 nm. Graphical Abstract: [Figure not available: see fulltext