Modular synchronization in complex networks with a gauge Kuramoto model

We modify the Kuramoto model for synchronization on complex networks by introducing a gauge term that depends on the edge betweenness centrality (BC). The gauge term introduces additional phase difference between two vertices from 0 to $\pi$ as the BC on the edge between them increases from the minimum to the maximum in the network. When the network has a modular structure, the model generates the phase synchronization within each module, however, not over the entire system. Based on this feature, we can distinguish modules in complex networks, with relatively little computational time of $\mathcal{O}(NL)$, where $N$ and $L$ are the number of vertices and edges in the system, respectively. We also examine the synchronization of the modified Kuramoto model and compare it with that of the original Kuramoto model in several complex networks.Comment: 10 pages, 7 figure

Real Space Imaging of One-Dimensional Standing Waves: Direct Evidence for a Luttinger Liquid

Electronic standing waves with two different wavelengths were directly mapped near one end of a single-wall carbon nanotube as a function of the tip position and the sample bias voltage with highresolution position-resolved scanning tunneling spectroscopy. The observed two standing waves caused by separate spin and charge bosonic excitations are found to constitute direct evidence for a Luttinger liquid. The increased group velocity of the charge excitation, the power-law decay of their amplitudes away from the scattering boundary, and the suppression of the density of states near the Fermi level were also directly observed or calculated from the two different standing waves.Comment: 14 pages, 4 figures. The latest version in PDF format is available from http://fy.chalmers.se/~eggert/papers/nanoLL.pd

Surface versus bulk characterization of the electronic inhomogeneity in a VO_{2} film

We investigated the inhomogeneous electronic properties at the surface and interior of VO_{2} thin films that exhibit a strong first-order metal-insulator transition (MIT). Using the crystal structural change that accompanies a VO_{2} MIT, we used bulk-sensitive X-ray diffraction (XRD) measurements to estimate the fraction of metallic volume p^{XRD} in our VO_{2} film. The temperature dependence of the p$^{XRD}$ was very closely correlated with the dc conductivity near the MIT temperature, and fit the percolation theory predictions quite well: $\sigma$ $\sim$ (p - p_{c})^{t} with t = 2.0$\pm$0.1 and p_{c} = 0.16$\pm$0.01. This agreement demonstrates that in our VO$_{2}$ thin film, the MIT should occur during the percolation process. We also used surface-sensitive scanning tunneling spectroscopy (STS) to investigate the microscopic evolution of the MIT near the surface. Similar to the XRD results, STS maps revealed a systematic decrease in the metallic phase as temperature decreased. However, this rate of change was much slower than the rate observed with XRD, indicating that the electronic inhomogeneity near the surface differs greatly from that inside the film. We investigated several possible origins of this discrepancy, and postulated that the variety in the strain states near the surface plays an important role in the broad MIT observed using STS. We also explored the possible involvement of such strain effects in other correlated electron oxide systems with strong electron-lattice interactions.Comment: 27 pages and 7 figure

Monte Carlo Simulation of Sinusoidally Modulated Superlattice Growth

The fabrication of ZnSe/ZnTe superlattices grown by the process of rotating the substrate in the presence of an inhomogeneous flux distribution instead of successively closing and opening of source shutters is studied via Monte Carlo simulations. It is found that the concentration of each compound is sinusoidally modulated along the growth direction, caused by the uneven arrival of Se and Te atoms at a given point of the sample, and by the variation of the Te/Se ratio at that point due to the rotation of the substrate. In this way we obtain a ZnSe$_{1-x}$Te$_x$ alloy in which the composition $x$ varies sinusoidally along the growth direction. The period of the modulation is directly controlled by the rate of the substrate rotation. The amplitude of the compositional modulation is monotonous for small angular velocities of the substrate rotation, but is itself modulated for large angular velocities. The average amplitude of the modulation pattern decreases as the angular velocity of substrate rotation increases and the measurement position approaches the center of rotation. The simulation results are in good agreement with previously published experimental measurements on superlattices fabricated in this manner

Dynamic renormalization group study of a generalized continuum model of crystalline surfaces

We apply the Nozieres-Gallet dynamic renormalization group (RG) scheme to a continuum equilibrium model of a d-dimensional surface relaxing by linear surface tension and linear surface diffusion, and which is subject to a lattice potential favoring discrete values of the height variable. The model thus interpolates between the overdamped sine-Gordon model and a related continuum model of crystalline tensionless surfaces. The RG flow predicts the existence of an equilibrium roughening transition only for d = 2 dimensional surfaces, between a flat low-temperature phase and a rough high-temperature phase in the Edwards-Wilkinson (EW) universality class. The surface is always in the flat phase for any other substrate dimensions d > 2. For any value of d, the linear surface diffusion mechanism is an irrelevant perturbation of the linear surface tension mechanism, but may induce long crossovers within which the scaling properties of the linear molecular-beam epitaxy equation are observed, thus increasing the value of the sine-Gordon roughening temperature. This phenomenon originates in the non-linear lattice potential, and is seen to occur even in the absence of a bare surface tension term. An important consequence of this is that a crystalline tensionless surface is asymptotically described at high temperatures by the EW universality class.Comment: 22 pages, 5 figures. Accepted for publication in Physical Review

Large 1/f noise of unipolar resistance switching and its percolating nature

We investigated the 1/f noise of Pt/NiO/Pt capacitors that show unipolar resistance switching. When they were switched from the low to high resistance states, the power spectral density of the voltage fluctuation was increased by approximately five orders of magnitude. At 100 K, the relative resistance fluctuation, SR/R2, in the low resistance state displayed a power law dependence on the resistance R with exponent w = 1.6. This behavior can be explained by percolation theory; however, at higher temperatures or near the switching voltage, SR/R2 becomes enhanced further. This large 1/f noise can be therefore an important problem in the development of resistance random access memory devices.Comment: 15 pages, 3 figure

Strength Reduction in Electrical and Elastic Networks

Particular aspects of problems ranging from dielectric breakdown to metal insu- lator transition can be studied using electrical o elastic networks. We present an expression for the mean breakdown strength of such networks.First, we intro- duce a method to evaluate the redistribution of current due to the removal of a finite number of elements from a hyper-cubic network of conducatances.It is used to determine the reduction of breakdown strength due to a fracture of size $\kappa$.Numerical analysis is used to show that the analogous reduction due to random removal of elements from electrical and elastic networks follow a similar form.One possible application, namely the use of bone density as a diagnostic tools for osteorosporosis,is discussed.Comment: one compressed file includes: 9 PostScrpt figures and a text fil

Using Nonlinear Response to Estimate the Strength of an Elastic Network

Disordered networks of fragile elastic elements have been proposed as a model of inner porous regions of large bones [Gunaratne et.al., cond-mat/0009221, http://xyz.lanl.gov]. It is shown that the ratio $\Gamma$ of responses of such a network to static and periodic strain can be used to estimate its ultimate (or breaking) stress. Since bone fracture in older adults results from the weakening of porous bone, we discuss the possibility of using $\Gamma$ as a non-invasive diagnostic of osteoporotic bone.Comment: 4 pages, 4 figure