17,428 research outputs found
Recommended from our members
Simulating Tsunami Inundation and Soil Response in a Large Centrifuge.
Tsunamis are rare, extreme events and cause significant damage to coastal infrastructure, which is often exacerbated by soil instability surrounding the structures. Simulating tsunamis in a laboratory setting is important to further understand soil instability induced by tsunami inundation processes. Laboratory simulations are difficult because the scale of such processes is very large, hence dynamic similitude cannot be achieved for small-scale models in traditional water-wave-tank facilities. The ability to control the body force in a centrifuge environment considerably reduces the mismatch in dynamic similitude. We review dynamic similitudes under a centrifuge condition for a fluid domain and a soil domain. A novel centrifuge apparatus specifically designed for exploring the physics of a tsunami-like flow on a soil bed is used to perform experiments. The present 1:40 model represents the equivalent geometric scale of a prototype soil field of 9.6 m deep, 21 m long, and 14.6 m wide. A laboratory facility capable of creating such conditions under the normal gravitational condition does not exist. With the use of a centrifuge, we are now able to simulate and measure tsunami-like loading with sufficiently high water pressure and flow velocities. The pressures and flow velocities in the model are identical to those of the prototype yielding realistic conditions of flow-soil interaction
Quasiparticle spectroscopy and high-field phase diagrams of cuprate superconductors -- An investigation of competing orders and quantum criticality
We present scanning tunneling spectroscopic and high-field thermodynamic
studies of hole- and electron-doped (p- and n-type) cuprate superconductors.
Our experimental results are consistent with the notion that the ground state
of cuprates is in proximity to a quantum critical point (QCP) that separates a
pure superconducting (SC) phase from a phase comprised of coexisting SC and a
competing order, and the competing order is likely a spin-density wave (SDW).
The effect of applied magnetic field, tunneling current, and disorder on the
revelation of competing orders and on the low-energy excitations of the
cuprates is discussed.Comment: 10 pages, 5 figures. Accepted for publication in the International
Journal of Modern Physics B. (Correspondence author: Nai-Chang Yeh, e-mail:
[email protected]
A parallel VLSI architecture for a digital filter of arbitrary length using Fermat number transforms
A parallel architecture for computation of the linear convolution of two sequences of arbitrary lengths using the Fermat number transform (FNT) is described. In particular a pipeline structure is designed to compute a 128-point FNT. In this FNT, only additions and bit rotations are required. A standard barrel shifter circuit is modified so that it performs the required bit rotation operation. The overlap-save method is generalized for the FNT to compute a linear convolution of arbitrary length. A parallel architecture is developed to realize this type of overlap-save method using one FNT and several inverse FNTs of 128 points. The generalized overlap save method alleviates the usual dynamic range limitation in FNTs of long transform lengths. Its architecture is regular, simple, and expandable, and therefore naturally suitable for VLSI implementation
Power system applications of fiber optic sensors
This document is a progress report of work done in 1985 on the Communications and Control for Electric Power Systems Project at the Jet Propulsion Laboratory. These topics are covered: Electric Field Measurement, Fiber Optic Temperature Sensing, and Optical Power transfer. Work was done on the measurement of ac and dc electric fields. A prototype sensor for measuring alternating fields was made using a very simple electroscope approach. An electronic field mill sensor for dc fields was made using a fiber optic readout, so that the entire probe could be operated isolated from ground. There are several instances in which more precise knowledge of the temperature of electrical power apparatus would be useful. This report describes a number of methods whereby the distributed temperature profile can be obtained using a fiber optic sensor. The ability to energize electronics by means of an optical fiber has the advantage that electrical isolation is maintained at low cost. In order to accomplish this, it is necessary to convert the light energy into electrical form by means of photovoltaic cells. JPL has developed an array of PV cells in gallium arsenide specifically for this purpose. This work is described
Effects of using different plasmonic metals in metal/dielectric/metal subwavelength waveguides on guided dispersion characteristics
The fundamental guided dispersion characteristics of guided light in a
subwavelength dielectric slit channel embedded by two different plasmonic
metals are investigated when varying the gap width. As a result, an overall and
salient picture of the guided dispersion characteristics is obtained over a
wide spectrum range below and above the plasma frequencies of the two different
plasmonic metals, which is important preliminary information for analyzing this
type of subwavelength waveguide. In particular, the effects of using two
different metals on the guided mode dispersions are emphasized in comparison
with the effects of using the same plasmonic metal cladding.Comment: 13 pages, 3 figures, typos corrected, reference added, text modifie
Average and worst-case specifications of precipitating auroral electron environment
The precipitation electrons in the auroral environment are highly variable in their energy and intensity in both space and time. As such they are a source of potential hazard to the operation of the Space Shuttle and other large spacecraft operating in polar orbit. In order to assess these hazards both the average and extreme states of the precipitating electrons must be determined. Work aimed at such a specification is presented. First results of a global study of the average characteristics are presented. In this study the high latitude region was divided into spatial elements in magnetic local time and corrected geomagnetic latitude. The average electron spectrum was then determined in each spatial element for seven different levels of activity as measured by K sub p using an extremely large data set of auroral observations. Second a case study of an extreme auroral electron environment is presented, in which the electrons are accelerated through field aligned potential as high as 30,000 volts and in which the spacecraft is seen to charge negatively to a potential approaching .5 kilovolts
Dimensionality of superconductivity in the infinite-layer high-temperature cuprate Sr0.9M0.1CuO2 (M = La, Gd)
The high magnetic field phase diagram of the electron-doped infinite layer
high-temperature superconducting (high-T_c) compound Sr_{0.9}La_{0.1}CuO_2 was
probed by means of penetration depth and magnetization measurements in pulsed
fields to 60 T. An anisotropy ratio of 8 was detected for the upper critical
fields with H parallel (H_{c2}^{ab}) and perpendicular (H_{c2}^c) to the CuO_2
planes, with H_{c2}^{ab} extrapolating to near the Pauli paramagnetic limit of
160 T. The longer superconducting coherence length than the lattice constant
along the c-axis indicates that the orbital degrees of freedom of the pairing
wavefunction are three dimensional. By contrast, low-field magnetization and
specific heat measurements of Sr_{0.9}Gd_{0.1}CuO_2 indicate a coexistence of
bulk s-wave superconductivity with large moment Gd paramagnetism close to the
CuO_2 planes, suggesting a strong confinement of the spin degrees of freedom of
the Cooper pair to the CuO_2 planes. The region between H_{c2}^{ab} and the
irreversibility line in the magnetization, H_{irr}^{ab}, is anomalously large
for an electron-doped high-T_c cuprate, suggesting the existence of additional
quantum fluctuations perhaps due to a competing spin-density wave order.Comment: 4 pages, 4 figures, submitted to Phys. Rev. B, Rapid Communications
(2004). Corresponding author: Nai-Chang Yeh (E-mail: [email protected]
Robustness of One-Dimensional Photonic Bandgaps Under Random Variations of Geometrical Parameters
The supercell method is used to study the variation of the photonic bandgaps
in one-dimensional photonic crystals under random perturbations to thicknesses
of the layers. The results of both plane wave and analytical band structure and
density of states calculations are presented along with the transmission
cofficient as the level of randomness and the supercell size is increased. It
is found that higher bandgaps disappear first as the randomness is gradually
increased. The lowest bandgap is found to persist up to a randomness level of
55 percent.Comment: Submitted to Physical Review B on April 8 200
Macroscopic evidence for quantum criticality and field-induced quantum fluctuations in cuprate superconductors
We present macroscopic experimental evidence for field-induced microscopic
quantum fluctuations in different hole- and electron-type cuprate
superconductors with varying doping levels and numbers of CuO layers per
unit cell. The significant suppression of the zero-temperature in-plane
magnetic irreversibility field relative to the paramagnetic field in all
cuprate superconductors suggests strong quantum fluctuations due to the
proximity of the cuprates to quantum criticality.Comment: 3 figures. To appear in Phys. Rev. B, Rapid Communications (2007).
For correspondence, contact: Nai-Chang Yeh (e-mail: [email protected]
- …