Noninvasive blood pressure pulse detection and blood pressure determination

Abstract This thesis describes the development of pressure sensor arrays and a range of methods suitable for the long-term measurement of heart rate and blood pressure determination using a cuff and a pressure sensor array on the radial artery. This study also reviews the historical background of noninvasive blood pressure measurement methods, summarizes the accuracies achieved and explains the requirements for common national and international standards of accuracy. Two prototype series of pressure transducer arrays based on electro-mechanical film (EMFi) were designed and tested. By offering high (∼TΩ) resistance, EMFi is an excellent material for low-current long-term measurement applications. About 50 transducer arrays were built using different configurations and electrode materials to sense low-frequency pressure pulsations on the radial artery in the wrist. In addition to uniform quality, essential requirements included an adequate linear response in the desired temperature range. Transducer sensitivity was tested as a function of temperature in the range of 25–45 °C at varying static and alternating pressures. The average sensitivity of the EMFi used in the transducers proved adequate (∼2.2 mV/mmHg and ∼7 mV/mmHg for normal and high sensitive films) for the intended purpose. The thesis also evaluates blood pressure measurements by the electronic palpation method (EP) and compares the achieved accuracy to that of the oscillometric method (OSC) using average intra-arterial (IA) blood pressure as a reference. All of these three measurements were made simultaneously for each person. In one test group, measurements were conducted on healthy volunteers in sitting and supine position during increasing and decreasing cuff pressure. Another group, comprising elderly cardiac patients, was measured only in the supine position during cuff inflation. The results showed that the EP method was approximately as accurate as the OSC method with the healthy subjects and slightly more accurate with the cardiac patient group. The advantage of the EP method is that also the wave shape and velocity of arterial pressure pulses is available for further analysis, including the assessment of arterial stiffness

Multi-layered tissue head phantoms for noninvasive optical diagnostics

Extensive research in the area of optical sensing for medical diagnostics requires development of tissue phantoms with optical properties similar to those of living human tissues. Development and improvement of in vivo optical measurement systems requires the use of stable tissue phantoms with known characteristics, which are mainly used for calibration of such systems and testing their performance over time. Optical and mechanical properties of phantoms depend on their purpose. Nevertheless, they must accurately simulate specific tissues they are supposed to mimic. Many tissues and organs including head possess a multi-layered structure, with specific optical properties of each layer. However, such a structure is not always addressed in the present-day phantoms. In this paper, we focus on the development of a plain-parallel multi-layered phantom with optical properties (reduced scattering coefficient $\mu_{s}^{\prime}$ and absorption coefficient μa) corresponding to the human head layers, such as skin, skull, and gray and white matter of the brain tissue. The phantom is intended for use in noninvasive diffuse near-infrared spectroscopy (NIRS) of human brain. Optical parameters of the fabricated phantoms are reconstructed using spectrophotometry and inverse adding-doubling calculation method. The results show that polyvinyl chloride-plastisol (PVCP) and zinc oxide (ZnO) nanoparticles are suitable materials for fabrication of tissue mimicking phantoms with controlled scattering properties. Good matching was found between optical properties of phantoms and the corresponding values found in the literature