On the basic mechanism of Pixelized Photon Detectors

A Pixelized Photon Detector (PPD) is a generic name for the semiconductor devices operated in the Geiger-mode, such as Silicon PhotoMultiplier and Multi-Pixel Photon Counter, which has high photon counting capability. While the internal mechanisms of the PPD have been intensively studied in recent years, the existing models do not include the avalanche process. We have simulated the multiplication and quenching of the avalanche process and have succeeded in reproducing the output waveform of the PPD. Furthermore our model predicts the existence of dead-time in the PPD which has never been numerically predicted. For serching the dead-time, we also have developed waveform analysis method using deconvolution which has the potential to distinguish neibouring pulses precisely. In this paper, we discuss our improved model and waveform analysis method.Comment: 4pages, 5figures, To appear in the proceedings of 5th International Conference on New Developments in Photodetection (NDIP08), Aix-les-Bains, France, 15-20 Jun 200

Numerical study of the photoelectron cloud in KEKB Low Energy Ring with a three-dimensional particle in cell method

A three-dimensional particle in cell simulation code has been developed to study the photoelectron cloud instabilities in KEKB LER. In this report, the program is described in detail. In particular, typical simulation results are presented for the photoelectron motion in various kinds of magnetic fields. The simulation shows that a solenoid is very effective in confining the photoelectrons to the vicinity of the vacuum chamber wall and in creating a region free of photoelectrons at the vacuum pipe center. The more uniform the solenoid field is, the more effectively does it suppress the electron-cloud buildup. Multipacting can occur both in a drift region and in a dipole magnet, and the heat load deposited on the chamber wall due to the lost electrons is important in these two cases. Electron trapping by the beam field as well as by various magnetic fields is an important phenomenon, especially inside quadrupole and sextupole magnets. Our numerical results qualitatively agree with the experimental studies

Design of beam optics for the Future Circular Collider e+e- -collider rings

A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromaticity correction system without additional sextupoles, by reducing the strength of one of the two sextupoles for vertical chromatic correction at each side of the IP. So-called "tapering" of the magnets is applied, which scales all fields of the magnets according to the local beam energy to compensate for the effect of synchrotron radiation (SR) loss along the ring. An asymmetric layout near the interaction region reduces the critical energy of SR photons on the incoming side of the IP to values below 100 keV, while matching the geometry to the beam line of the FCC proton collider (FCC-hh) [2] as closely as possible. Sufficient transverse/longitudinal dynamic aperture (DA) has been obtained, including major dynamical effects, to assure an adequate beam lifetime in the presence of beamstrahlung and top-up injection. In particular, a momentum acceptance larger than +/-2% has been obtained, which is better than the momentum acceptance of typical collider rings by about a factor of 2. The effects of the detector solenoids including their compensation elements are taken into account as well as synchrotron radiation in all magnets. The optics presented in this paper is a step toward a full conceptual design for the collider. A number of issues have been identified for further study

Compensation of the Crossing Angle with Crab Cavities at KEKB

Crab cavities have been installed in the KEKB B--Factory rings to compensate the crossing angle at the collision point and thus increase luminosity. The beam operation with crab crossing has been done since February 2007. This is the first experience with such cavities in colliders or storage rings. The crab cavities have been working without serious issues. While higher specific luminosity than the geometrical gain has been achieved, further study is necessary and under way to reach the prediction of simulation.Comment: Submitted to Particle Accelerator Conference 2007, MOZAKI01, Albuquerqu

Observation of the DsJ(2317) and DsJ(2457) in B decays

We report the first observation of the B --> Dbar DsJ(2317) and B --> Dbar DsJ(2457) decays based on 123.8 10^6 BBar events collected with the Belle detector at KEKB. We observe the DsJ(2317) decay to Ds pi0 and DsJ(2457) decay to the Ds* pi0 and Ds gamma final states. We also set 90% CL upper limits for the decays DsJ(2317) --> Ds* gamma, DsJ(2457) --> Ds* gamma, DsJ(2457) --> Ds pi0 and DsJ(2457) --> Ds pi+ pi-.Comment: 6 pages, 3 figures. A few minor corrections. Replaced by version accepted to publication in Phys. Rev. Let