Localization of the genes for tumor necrosis factor and lymphotoxin between the HLA classI and III regions by field inversion gel electrophoresis

To clarify the position of the TNFA and TNFB genes on the HLA map, we have assigned TNFA to large DNA restriction fragments separated by field inversion gel electrophoresis, which hybridize with either class III- or class I-specific probes as well. These results prove that the TNFA locus is localized between the HLA class III region and the HLA-B locus

A Physical Map Including a New Class I Gene (cda12) of the Human Major Histocompatibility Complex (A2/313 Haplotype) Derived from a Monosomy 6 Mutant Cell Line

To avoid interpretative problems due to restriction fragment length polymorphisms, the monosomy 6 mutant cell line BM19.7 was employed to establish a molecular map of the human major histocompatibility (HLA) complex in the A2,B13,Bw4,DRw6,DRw52,DQw1,DPw2 haplotype. Results were obtained mainly by field-inversion gel electrophoresis and Southern blotting techniques. The map extends to 4800 kb and includes the HLA complex with a length of 4200 kb. Five HTF islands could be positioned on the map. The class I region has a size of about 2000 kb and includes nonclassical HLA class I genes, some of which must be localized within 200 kb telomeric of HLA-A. A new class I gene, cda12, distinct from HLA-A, HLA-B, or HLA-C, has been localized within 50 kb from HLA-A. The class I region contains a gap of about 500 kb, just telomeric of HLA-C, in which further class I genes could not be detected. The class II region has a size of 1000 kb, which is separated from the class I region by about 1200 kb. The 5' end of the HLA-B gene is situated centromeric, giving an orientation opposite to that of the TNFA and TNFB loci. The estimated length of the HLA complex correlates well with its size determined cytogenetically using mutant cell lines with interstitial deletions

Extraordinary Transmission in the UV Range from Sub-wavelength Slits on Semiconductors

In this paper we describe a way to achieve the extraordinary transmission regime from sub-wavelength slits carved on semiconductor substrates. Unlike metals, the dielectric permittivity of typical semiconductors like GaAs or GaP is negative beginning in the extreme UV range (lambda <= 270nm). We show that the metal-like response of bulk semiconductors exhibits surface plasmon waves that lead to extraordinary transmission in the UV and soft X-ray ranges. The importance of realistic material response versus perfect conductors is also discussed. These findings may be important in high resolution photo-lithography, near field optical devices and ultra high density optical storage

Optical Vortices during a Super-Resolution Process in a Metamaterial

We show that a super-resolution process with 100% visibility is characterized by the formation of a point of phase singularity in free space outside the lens in the form of a saddle with topological charge equal to -1. The saddle point is connected to two vortices at the end boundary of the lens, and the two vortices are in turn connected to another saddle point inside the lens. The structure saddle-vortices-saddle is topologically stable. The formation of the saddle point in free space explains also the negative flux of energy present in a certain region of space outside the lens. The circulation strength of the power flow can be controlled by varying the position of the object plane with respect to the lens

How gaming tourism affects tourism development through word-of-mouth communication regarding a destination: applying the integrated satisfaction theory

This study applies the concept of integrated satisfaction to investigate the effects of satisfaction with gaming and non-gaming experience on word-of-mouth communication regarding gaming destination. A survey in Macau (n = 298) indicates that integrated satisfaction has a partial mediating effect on the relationship between non-gaming satisfaction and word-of-mouth, and integrated satisfaction has a moderating and partial mediating effect on the relationship between gaming satisfaction and word-of-mouth. Therefore, gaming tourism enlarges the effect of the non-gaming tourism experience. Besides, gaming activities cause positive word-of-mouth communication for repeat tourists. This study extends our knowledge in gaming tourism and integrated satisfaction theory

Modular titanium alloy neck adapter failures in hip replacement - failure mode analysis and influence of implant material

<p>Abstract</p> <p>Background</p> <p>Modular neck adapters for hip arthroplasty stems allow the surgeon to modify CCD angle, offset and femoral anteversion intraoperatively. Fretting or crevice corrosion may lead to failure of such a modular device due to high loads or surface contamination inside the modular coupling. Unfortunately we have experienced such a failure of implants and now report our clinical experience with the failures in order to advance orthopaedic material research and joint replacement surgery.</p> <p>The failed neck adapters were implanted between August 2004 and November 2006 a total of about 5000 devices. After this period, the titanium neck adapters were replaced by adapters out of cobalt-chromium. Until the end of 2008 in total 1.4% (n = 68) of the implanted titanium alloy neck adapters failed with an average time of 2.0 years (0.7 to 4.0 years) postoperatively. All, but one, patients were male, their average age being 57.4 years (36 to 75 years) and the average weight 102.3 kg (75 to 130 kg). The failures of neck adapters were divided into 66% with small CCD of 130° and 60% with head lengths of L or larger. Assuming an average time to failure of 2.8 years, the cumulative failure rate was calculated with 2.4%.</p> <p>Methods</p> <p>A series of adapter failures of titanium alloy modular neck adapters in combination with a titanium alloy modular short hip stem was investigated. For patients having received this particular implant combination risk factors were identified which were associated with the occurence of implant failure. A Kaplan-Meier survival-failure-analysis was conducted. The retrieved implants were analysed using microscopic and chemical methods. Modes of failure were simulated in biomechanical tests. Comparative tests included modular neck adapters made of titanium alloy and cobalt chrome alloy material.</p> <p>Results</p> <p>Retrieval examinations and biomechanical simulation revealed that primary micromotions initiated fretting within the modular tapered neck connection. A continuous abrasion and repassivation process with a subsequent cold welding at the titanium alloy modular interface. Surface layers of 10 - 30 μm titanium oxide were observed. Surface cracks caused by fretting or fretting corrosion finally lead to fatigue fracture of the titanium alloy modular neck adapters. Neck adapters made of cobalt chrome alloy show significantly reduced micromotions especially in case of contaminated cone connection. With a cobalt-chromium neck the micromotions can be reduced by a factor of 3 compared to the titanium neck. The incidence of fretting corrosion was also substantially lower with the cobalt-chromium neck configuration.</p> <p>Conclusions</p> <p>Failure of modular titanium alloy neck adapters can be initiated by surface micromotions due to surface contamination or highly loaded implant components. In the present study, the patients at risk were men with an average weight over 100 kg. Modular cobalt chrome neck adapters provide higher safety compared to titanium alloy material.</p

Relationship Bonds and Customer Loyalty: A Study Across Different Service Contexts

The benefits of customer relationship strategies are well known and somewhat established nowadays. Customer loyalty emerges as the crucial glue in developing a relational approach. However, relational bonds, which relate to customer loyalty, have not yet been fully explored. Also, there is little research that takes into account the effect of service types on customer relationships and bonding. This paper develops a conceptual framework based on previous literature with a complete set of different relational bonds and examines its influence on customer loyalty across search, experience and credence services through a survey-based empirical study, with a sample of 233 consumers. The results provide guidance to managers to differentiate customer relationship strategies according to each specific service context

The Study of Quantum Interference in Metallic Photonic Crystals Doped with Four-Level Quantum Dots

In this work, the absorption coefficient of a metallic photonic crystal doped with nanoparticles has been obtained using numerical simulation techniques. The effects of quantum interference and the concentration of doped particles on the absorption coefficient of the system have been investigated. The nanoparticles have been considered as semiconductor quantum dots which behave as a four-level quantum system and are driven by a single coherent laser field. The results show that changing the position of the photonic band gap about the resonant energy of the two lower levels directly affects the decay rate, and the system can be switched between transparent and opaque states if the probe laser field is tuned to the resonance frequency. These results provide an application for metallic nanostructures in the fabrication of new optical switches and photonic devices