2,475 research outputs found
Acceptance sampling plan for multiple manufacturing lines using EWMA process capability index
The problem of developing a product acceptance determination procedure for multiple characteristics has attracted the quality assurance practitioners. Due to sufficient demands of consumers, it may not be possible to deliver the quantity ordered on time using the process based on one manufacturing line. So, in factories, product is manufactured using multiple manufacturing lines and combine it. In this manuscript, we present the designing of an acceptance sampling plan for products from multiple independent manufacturing lines using exponentially weighted moving average (EWMA) statistic of the process capability index. The plan parameters such as the sample size and the acceptance number will be determined by satisfying both the producer's and the consumer's risks. The efficiency of the proposed plan will be discussed over the existing sampling plan. The tables are given for industrial use and explained with the help of industrial examples. We conclude that the use of the proposed plan in these industries minimizes the cost and time of inspection. Smaller the sample size means low inspection cost. The proposed plan for some non-normal distributions can be extended as a future research. The determination of sampling plan using cost model is also interested area for the future research. ? 2017 The Japan Society of Mechanical Engineers.11Ysciescopu
A Time Truncated Moving Average Chart for the Weibull Distribution
A control chart of monitoring the number of failures is proposed with a moving average scheme, when the life of an item follows a Weibull distribution. A specified number of items are put on a time truncated life test and the number of failures is observed. The proposed control chart has been evaluated by the average run lengths (ARLs) under different parameter settings. The control constant and the test time multiplier are to be determined by considering the in-control ARL. It is observed that the proposed control chart is more efficient in detecting a shift in the process as compared with the existing time truncated control chart. ? 2013 IEEE.11Ysciescopu
Progress in radar snow research
Multifrequency measurements of the radar backscatter from snow-covered terrain were made at several sites in Brookings, South Dakota, during the month of March of 1979. The data are used to examine the response of the scattering coefficient to the following parameters: (1) snow surface roughness, (2) snow liquid water content, and (3) snow water equivalent. The results indicate that the scattering coefficient is insensitive to snow surface roughness if the snow is drv. For wet snow, however, surface roughness can have a strong influence on the magnitude of the scattering coefficient. These observations confirm the results predicted by a theoretical model that describes the snow as a volume of Rayleig scatterers, bounded by a Gaussian random surface. In addition, empirical models were developed to relate the scattering coefficient to snow liquid water content and the dependence of the scattering coefficient on water equivalent was evaluated for both wet and dry snow conditions
A Control Chart for Gamma Distribution using Multiple Dependent State Sampling
In this article, a control chart based on multiple dependent (or deferred) state sampling for the gamma distributed quality characteristic is proposed using the gamma to normal transformation. The proposed control chart has two pairs of control limits, which can be determined by considering the in-control average run length (ARL). The shift in the scale parameter of a gamma distribution is considered and the out-of-control ARL is evaluated. The performance of the proposed chart has been shown for different levels of the parameters of the proposed control chart. It is also shown that the proposed chart is better than the Shewhart chart in terms of ARLs. A case study with a real data has been included for the practical usage of the proposed scheme. ? 2017 KIIE.11Yscopuskc
The Relation Between Residential Self-Selection and Urban Mobility in Middle Eastern Cities: the Case of Alexandria, Egypt
The present paper attempts to fill a part of the gap in the studies on residential location choices and their relations to urban mobility, socio-economics, and the built environment by presenting the results of a study on Alexandria, Egypt, by analysing the results of a survey in eight neighbourhoods undertaken in 2015. Four questions were answered in this study: (i) “How are the main drivers behind residential location choices in Alexandria connected to various socio-demographic groups or people with different availability to urban and built environments?”, (ii) “How are the main residential self-selections in Alexandria associated with one another and which are the most important?”, (iii) “How are the housing location-related decisions of Egyptians similar to or different from international decisions?”, and (iv) “How can planners and decision-makers use the knowledge produced by this study for urban planning and housing in Egypt?”. Library work and the results of a Χ2 test of independence show that availability of transportation modes, nice neighbourhoods, and affordability are the strongest motives behind decisions. However, socio-economic factors are generally stronger than urban mobility and spatial issues. These findings are partly different from those of high-income countries
High-Tc Superconducting Bolometer Noise Measurement Using Low Noise Transformers - Theory and Optimization
Care must always be taken when performing noise measurements on high-Tc superconducting materials to ensure that the results are not from the measurement system itself. One situation likely to occur is with low noise transformers. One of the least understood devices, it provides voltage gain for low impedance inputs (< 100 ), e.g., YBaCuO and GdBaCuO thin films, with comparatively lower noise levels than other devices for instance field effect and bipolar junction transistors. An essential point made in this paper is that because of the complex relationships between the transformer ports, input impedance variance alters the transformer s transfer function in particular, the low frequency cutoff shift. The transfer of external and intrinsic transformer noise to the output along with optimization and precautions are treated; all the while, we will cohesively connect the transfer function shift, the load impedance, and the actual noise at the transformer output
An attribute control chart for a Weibull distribution under accelerated hybrid censoring
In this article, an attribute control chart has been proposed using the accelerated hybrid censoring logic for the monitoring of defective items whose life follows a Weibull distribution. The product can be tested by introducing the acceleration factor based on different pressurized conditions such as stress, load, strain, temperature, etc. The control limits are derived based on the binomial distribution, but the fraction defective is expressed only through the shape parameter, the acceleration factor and the test duration constant. Tables of the average run lengths have been generated for different process parameters to assess the performance of the proposed control chart. Simulation studies have been performed for the practical use, where the proposed chart is compared with the Shewhart np chart for demonstration of the detection power of a process shift. ? 2017 Aslam et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.114Ysciescopu
- …