1,243,302 research outputs found
Point defects in silicon after zinc diffusion - a deep level transient spectroscopy and spreading-resistance profiling study
We present results from spreading-resistance profiling and deep level transient spectroscopy on Si after Zn diffusion at 1294 K. Concentration profiles of substitutional in dislocation-free and highly dislocated Si are described by a diffusion mechanism involving interstitial-substitutional exchange. Additional annealing at 873 K following quenching from the diffusion temperature is required in the case of dislocation-free Si to electrically activate . The formation of complexes of with unwanted impurities upon quenching is discussed. Additional Ni diffusion experiments as well as total energy calculations suggest that Ni is a likely candidate for the passivation of Zns. From total energy calculations we find that the formation of complexes involving Zn and Ni depends on the position of the Fermi level. This explains differences in results from spreading-resistance profiling and deep level transient spectroscopy on near-intrinsic and p-type Si, respectively
Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF
Regenerative chatter is a well-known machining problem that results in unstable cutting process, poor surface quality and reduced material removal rate. This undesired self-excited vibration problem is one of the main obstacles in utilizing the total capacity of a machine tool in production. In order to obtain a chatter-free process on a machining center, stability diagrams can be used. Numerically or analytically, constructing the stability lobe diagram for a certain spindleholdertool combination implies knowing the system dynamics at the tool tip; i.e., the point frequency response function (FRF) that relates the dynamic displacement and force at that point. This study presents an analytical method that uses Timoshenko beam theory for calculating the tool point FRF of a given combination by using the receptance coupling and structural modication methods. The objective of the study is two fold. Firstly, it is aimed to develop a reliable mathematical model to predict tool point FRF in a machining center so that chatter stability analysis can be done, and secondly to make use of this model in studying the effects of individual bearing and contact parameters on tool point FRF so that better approaches can be found in predicting contact parameters from experimental measurements. The model can also be used to study the effects of several spindle, holder and tool parameters on chatter stability. In this paper, the mathematical model, as well as the details of obtaining the system component (spindle, holder and tool) dynamics and coupling them to obtain the tool point FRF are given. The model suggested is veried by comparing the natural frequencies of an example spindleholdertool assembly obtained from the model with those obtained from a nite element software
Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle-tool assemblies
Self-excited vibration of the tool, regenerative chatter, can be predicted and eliminated if the stability lobe diagram of the spindle–holder–tool assembly is known. Regardless of the approach being used, analytically or numerically, forming the stability lobe diagram of an assembly implies knowing the point frequency response function (FRF) in receptance form at the tool tip. In this paper, it is aimed to study the effects of spindle–holder and holder–tool interface dynamics, as well as the effects of individual bearings on the tool point FRF by using an analytical model recently developed by the authors for predicting the tool point FRF of spindle–holder–tool assemblies. It is observed that bearing dynamics control the rigid body modes of the assembly, whereas, spindle–holder interface dynamics mainly affects the first elastic mode, while holder–tool interface dynamics alters the second elastic mode. Individual bearing and interface translational stiffness and damping values control the natural frequency and the peak of their relevant modes, respectively. It is also observed that variations in the values of rotational contact parameters do not affect the resulting FRF considerably, from which it is concluded that rotational contact parameters of both interfaces are not as crucial as the translational ones and therefore average values can successfully be used to represent their effects. These observations are obtained for the bearing and interface parameters taken from recent literature, and will be valid for similar assemblies. Based on the effect analysis carried out, a systematic approach is suggested for identifying bearing and interface contact parameters from experimental measurements
Coulomb corrections to bremsstrahlung in electric field of heavy atom at high energies
The differential and partially integrated cross sections are considered for
bremsstrahlung from high-energy electrons in atomic field with the exact
account of this field. The consideration exploits the quasiclassical electron
Green's function and wave functions in an external electric field. It is shown
that the Coulomb corrections to the differential cross section are very
susceptible to screening. Nevertheless, the Coulomb corrections to the cross
section summed up over the final-electron states are independent of screening
in the leading approximation over a small parameter ( is
a screening radius, is the electron mass, ). Bremsstrahlung from
an electron beam of the finite size on heavy nucleus is considered as well.
Again, the Coulomb corrections to the differential probability are very
susceptible to the beam shape, while those to the probability integrated over
momentum transfer are independent of it, apart from the trivial factor, which
is the electron-beam density at zero impact parameter. For the Coulomb
corrections to the bremsstrahlung spectrum, the next-to-leading terms with
respect to the parameters ( is the electron energy) and
are obtained.Comment: 13 pages, 4 figure
Crystal structure of 3-{(E)-[(3, 4-dichloro-phenyl)imino]methyl}benzene-1, 2-diol
The authors acknowledge the provision of funds for the purchase of diffractometer and encouragement by Dr.Muhammad Akram Chaudhary, Vice Chancellor, University of Sargodha, Pakistan.Peer reviewedPublisher PD
Integral equation for inhomogeneous condensed bosons generalizing the Gross-Pitaevskii differential equation
We give here the derivation of a Gross-Pitaevskii--type equation for
inhomogeneous condensed bosons. Instead of the original Gross-Pitaevskii
differential equation, we obtain an integral equation that implies less
restrictive assumptions than are made in the very recent study of Pieri and
Strinati [Phys. Rev. Lett. 91 (2003) 030401]. In particular, the Thomas-Fermi
approximation and the restriction to small spatial variations of the order
parameter invoked in their study are avoided.Comment: Phys. Rev. A (accepted
Reusable chelating resins concentrate metal ions from highly dilute solutions
Column chromatographic method uses new metal chelating resins for recovering heavy-metal ions from highly dilute solutions. The absorbed heavy-metal cations may be removed from the chelating resins by acid or base washes. The resins are reusable after the washes are completed
- …