Comparative study of (0.5%) levobupivacaine and (0.75%) ropivacaine in supraclavicular brachial plexus block by lateral approach

Background: As compared to general anaesthesia, brachial plexus block for upper limb surgery gives fewer side effects and better postoperative analgesia. The objective of this study was to evaluate the effects of 0.5% levobupivacaine and compare it with 0.75% ropivacaine.Methods: For this prospective randomized, controlled study, 60 patients of both sexes of ASA grade 1 and 2 were enrolled and divided into two groups and supraclavicular brachial plexus block was performed by lateral approach using 30 ml of 0.5% levobupivacaine and 0.75% ropivacaine. The onset of sensory and motor block, duration of sensory and motor block and analgesia and possible adverse events were recorded.Results: No statistically significant difference was observed in the onset of sensory block in both groups. Onset of motor block was significantly faster in levobupivacaine group (P<0.05). Duration of sensory block, motor block and analgesia was significantly longer in levobupivacaine group (P<0.05).Conclusions: 0.5% levobupivacaine is better alternative to 0.75% ropivacaine in brachial plexus block in term of early onset of sensory block and long duration of analgesia

In vitro study of some plant extracts against Alternaria brassicae and Alternaria brassicicola

Madhya Pradesh is an important rapeseed-mustard producing state of India contributing nearly of the total production in the country. The present study aims to evaluate the effectiveness of some botanicals viz., Neem, Eucalyptus, Datura, Pudina, Tulsi, Lantana under crude and Forms @ against 10% Alternaria brassicae under in vitro condition by poisoned food technique. Neem and Eucalyptus were also evaluated in the oil forms.  Nearly all the tested botanicals found effective against these fungi. Among the crude extract 10 per cent the minimum growth was recorded in Neem followed by Eucalyptus, Tulsi, Lantana, Datura and Pudina. Neem was significantly superior over Tulsi, Lantana, Datura and Pudina but at par with Eucalyptus. Under boil forms the minimum radial growth was also recorded in Neem. The oil extract (Neem and Eucalyptus) were found less effective as compared to crude and boil extracts

Multimodal Sentiment Sensing and Emotion Recognition Based on Cognitive Computing Using Hidden Markov Model with Extreme Learning Machine

In today's competitive business environment, exponential increase of multimodal content results in a massive amount of shapeless data. Big data that is unstructured has no specific format or organisation and can take any form, including text, audio, photos, and video. Many assumptions and algorithms are generally required to recognize different emotions as per literature survey, and the main focus for emotion recognition is based on single modality, such as voice, facial expression and bio signals. This paper proposed the novel technique in multimodal sentiment sensing with emotion recognition using artificial intelligence technique. Here the audio and visual data has been collected based on social media review and classified using hidden Markov model based extreme learning machine (HMM_ExLM). The features are trained using this method. Simultaneously, these speech emotional traits are suitably maximised. The strategy of splitting areas is employed in the research for expression photographs and various weights are provided to each area to extract information. Speech as well as facial expression data are then merged using decision level fusion and speech properties of each expression in region of face are utilized to categorize. Findings of experiments show that combining features of speech and expression boosts effect greatly when compared to using either speech or expression alone. In terms of accuracy, recall, precision, and optimization level, a parametric comparison was made

Characterization of maize genotypes using microsatellite markers associated with QTLs for kernel iron and zinc

224-234Crop genetic resources rich in Fe and Zn provide sustainable and cost-effective solution to alleviate micronutrient malnutrition. Maize being the leading staple crop assumes great significance as a target crop for biofortification. We report here wide genetic variation for kernel Fe and Zn among 20 diverse maize inbreds lines, majority of which were bred for quality protein maize (QPM) and provitamin-A. Kernel Fe ranged from 30.0 - 46.13 mg/kg, while kernel Zn ranged from 8.68-39.56 mg/kg. Moderate but positive correlation was observed between the micronutrients. Characterization using 25 Single sequence repeats (SSRs) linked to QTLs for kernel Fe produced 58 alleles. Similarly, 86 alleles were identified from 35 SSRs linked to QTLs for kernel Zn. One unique allele for kernel Fe and three unique alleles for kernel Zn were identified. The mean polymorphic information content (PIC) was 0.40 for both kernel Fe and  Zn. Jaccard’s dissimilarity coefficients varied from 0.25 - 0.91 with a mean of 0.58 for kernel-Fe while 0.27- 0.88 with a mean of 0.57 for kernel Zn. Principal coordinate analysis depicted diversity of inbreds. Cluster analysis grouped the inbreds into three major clusters for both kernel Fe and Zn. Potential cross combinations have been proposed to develop micronutrient rich hybrids and novel inbreds with higher Fe and Zn. The information generated here would help the maize biofortification programme to develop nutritionally enriched hybrids

High Performance and Flexible Supercapacitors based on Carbonized Bamboo Fibers for Wide Temperature Applications

High performance carbonized bamboo fibers were synthesized for a wide range of temperature dependent energy storage applications. The structural and electrochemical properties of the carbonized bamboo fibers were studied for flexible supercapacitor applications. The galvanostatic charge-discharge studies on carbonized fibers exhibited specific capacity of similar to 510F/g at 0.4 A/g with energy density of 54 Wh/kg. Interestingly, the carbonized bamboo fibers displayed excellent charge storage stability without any appreciable degradation in charge storage capacity over 5,000 charge-discharge cycles. The symmetrical supercapacitor device fabricated using these carbonized bamboo fibers exhibited an areal capacitance of similar to 1.55 F/cm(2) at room temperature. In addition to high charge storage capacity and cyclic stability, the device showed excellent flexibility without any degradation to charge storage capacity on bending the electrode. The performance of the supercapacitor device exhibited similar to 65% improvement at 70 degrees C compare to that at 10 degrees C. Our studies suggest that carbonized bamboo fibers are promising candidates for stable, high performance and flexible supercapacitor devices

Development and Physicochemical Characterization of Acetalated Dextran Aerosol Particle Systems for Deep Lung Delivery

Biocompatible, biodegradable polymers are commonly used as excipients to improve the drug delivery properties of aerosol formulations, in which acetalated dextran (Ac-Dex) exhibits promising potential as a polymer in various therapeutic applications. Despite this promise, there is no comprehensive study on the use of Ac-Dex as an excipient for dry powder aerosol formulations. In this study, we developed and characterized pulmonary drug delivery aerosol microparticle systems based on spray-dried Ac-Dex with capabilities of (1) delivering therapeutics to the deep lung, (2) targeting the particles to a desired location within the lungs, and (3) releasing the therapeutics in a controlled fashion. Two types of Ac-Dex, with either rapid or slow degradation rates, were synthesized. Nanocomposite microparticle (nCmP) and microparticle (MP) systems were successfully formulated using both kinds of Ac-Dex as excipients and curcumin as a model drug. The resulting MP were collapsed spheres approximately 1μm in diameter, while the nCmP were similar in size with wrinkled surfaces, and these systems dissociated into 200nm nanoparticles upon reconstitution in water. The drug release rates of the Ac-Dex particles were tuned by modifying the particle size and ratio of fast to slow degrading Ac-Dex. The pH of the environment was also a significant factor that influenced the drug release rate. All nCmP and MP systems exhibited desirable aerodynamic diameters that are suitable for deep lung delivery (e.g. below 5μm). Overall, the engineered Ac-Dex aerosol particle systems have the potential to provide targeted and effective delivery of therapeutics into the deep lung

Comparison of clinical indices with halitosis grading in chronic periodontitis: A randomized control trial

Background: Oral malodor is a major periodontal complaint, but the best method for assessing the halitosis grade is still undefined. The primary objective of the study was to detect the halitosis grade in the exhaled breath using the three distinct techniques and to compare the readings with different clinical indices to find out the best method of halitosis grading. Materials and Methods: A total of 90 patients with chronic periodontitis having oral malodor were included in the study. The subjective assessment of the exhaled breath (halitosis grading) was done by three different methods; using a handheld portable Tanita FitScan sulfide monitor, by Halitox toxin assay, and by organoleptic (Sniff test) method. The findings were then compared with the clinical parameters of poor oral hygiene like plaque index (PI), gingival index (GI), gingival bleeding index (BI), and pocket depth (PD) to detect the best method of halitosis grading. Results: The mean age of the patients included was 38.23 ± 8.83 (mean ± standard deviation) years. The median value of halitosis grading as obtained by Tanita FitScan was 3.0 (95% confidence interval as 2 and 4) which was then compared with clinical indices (PI, GI, BI, and PD) and the results were statistically significant (P < 0.05), whereas the other two techniques of halitosis grading gave insignificant results. Conclusion: The results confirmed that the halitosis grading done using Tanita FitScan sulfide monitor is more appropriate with respect to clinical indices when compared with the other two techniques

Coadministration of a tumor-penetrating peptide improves the therapeutic efficacy of paclitaxel in a novel air-grown lung cancer 3D spheroid model

Three-dimensional (3 D) cell culture platforms are increasingly being used in cancer research and drug development since they mimic avascular tumors in vitro. In this study, we focused on the development of a novel air-grown multicellular spheroid (MCS) model to mimic in vivo tumors for understanding lung cancer biology and improvement in the evaluation of aerosol anticancer therapeutics. 3 D MCS were formed using A549 lung adenocarcinoma cells, comprising cellular heterogeneity with respect to different proliferative and metabolic gradients. The growth kinetics, morphology and 3 D structure of air-grown MCS were characterized by brightfield, fluorescent and scanning electron microscopy. MCS demonstrated a significant decrease in growth when the tumor-penetrating peptide iRGD and paclitaxel (PTX) were coadministered as compared with PTX alone. It was also found that when treated with both iRGD and PTX, A549 MCS exhibited an increase in apoptosis and decrease in clonogenic survival capacity in contrast to PTX treatment alone. This study demonstrated that coadministration of iRGD resulted in the improvement of the tumor penetration ability of PTX in an in vitro A549 3 D MCS model. In addition, this is the first time a high-throughput air-grown lung cancer tumor spheroid model has been developed and evaluated

Development of Aerosol Phospholipid Microparticles for the Treatment of Pulmonary Hypertension

Pulmonary arterial hypertension (PAH) is an incurable cardiovascular disease characterized by high blood pressure in the arteries leading from the heart to the lungs. Over two million people in the USA are diagnosed with PAH annually and the typical survival rate is only 3 years after diagnosis. Current treatments are insufficient because of limited bioavailability, toxicity, and costs associated with approved therapeutics. Aerosol delivery of drugs is an attractive approach to treat respiratory diseases because it increases localized drug concentration while reducing systemic side effects. In this study, we developed phospholipid-based aerosol microparticles via spray drying consisting of the drug tacrolimus and the excipients dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylglycerol. The phospholipid-based spray-dried aerosol microparticles were shown to be smooth and spherical in size, ranging from 1 to 3 μm in diameter. The microparticles exhibited thermal stability and were amorphous after spray drying. Water content in the microparticles was under 10%, which will allow successful aerosol dispersion and long-term storage stability. In vitro aerosol dispersion showed that the microparticles could successfully deposit in the deep lung, as they exhibited favorable aerodynamic diameters and high fine particle fractions. In vitro dose-response analysis showed that TAC is nontoxic in the low concentrations that would be delivered to the lungs. Overall, this work shows that tacrolimus-loaded phospholipid-based microparticles can be successfully created with optimal physicochemical and toxicological characteristics