28 research outputs found
Soft-x-ray resonant scattering from V/Fe (001) magnetic superlattices
The magnetic properties of Fe and V in (n ML V / 5 ML Fe) (001) superlattices (n = 1, 2, and 5 ML) have been investigated by measuring the magnetization dependent scattering of elliptically polarized soft x rays at various scattering angles and for photon energies across the 2p x-ray-absorption edges of both Fe and V. A quantitative estimate of the magnetic moment induced on vanadium is obtained from the analysis of the resonant scattering data. [S0163-1829(99)50842-4]
Recommended from our members
Large area nanoimprint enables ultra-precise x-ray diffraction gratings.
A process for fabrication of ultra-precise diffraction gratings for high resolution x-ray spectroscopy was developed. A grating pattern with constant or variable line spacing (VLS) is recorded on a quartz plate by use of e-beam lithography with nanometer scale accuracy of the groove placement. The pattern is transferred to a massive grating blank by large area nanoimprint followed by dry or/and wet etching for groove shaping. High fidelity of the nanoimprint transfer step was confirmed by differential wavefront measurements. Successful implementation of the suggested fabrication approach was demonstrated by fabrication of a lamellar 900 lines/mm VLS grating for a soft x-ray fluorescence spectrometer
Recommended from our members
Ultra-low blaze angle gratings for synchrotron and free electron laser applications.
We have developed a method for the manufacture of x-ray diffraction gratings with arbitrarily small blaze angles. These gratings are made by a process in which a high blaze angle grating made by anisotropic etching of Si (111) is subjected to planarization and reactive ion etching. Differential etching of the planarization medium and silicon ensures reduction of the blaze angle. Repeated application of this process leads to gratings of increasing perfection with an arbitrarily small blaze angle. This opens the way to highly efficient low line density gratings, to damage resistant gratings for ultra-high power applications such as free electron lasers, and for extension of the use of gratings into the hard x-ray energy range for dispersive spectroscopy
Recommended from our members
6000 lines/mm blazed grating for a high-resolution x-ray spectrometer.
We have designed and fabricated a high groove density blazed grating for a Resonant Inelastic X-ray Scattering spectrometer for the new Qerlin beamline at the Advanced Light Source (ALS) synchrotron facility. The gratings were fabricated using a set of nanofabrication techniques including e-beam lithography, nanoimprint, plasma etch, and anisotropic wet etching. Two gratings with groove density of 6000 lines/mm and 3000 lines/mm and optimized for operation in the 1st and 2nd negative diffraction order respectively were fabricated and tested. We report on fabrication details and characterization of the gratings at beamline 6.3.2 of the ALS
Recommended from our members
Highly efficient ultra-low blaze angle multilayer grating.
We have developed an advanced process for blaze angle reduction of x-ray gratings for the soft, tender, and EUV spectral ranges. The process is based on planarization of an anisotropically etched Si blazed grating followed by a chemically selective plasma etch. This provides a way to adjust the blaze angle to any lower value with high accuracy. Here we demonstrate the reduction of the blaze angle to an extremely low value of 0.04°±0.004°. For a 100 lines/mm grating with a Mo/Si multilayer coating, the grating exhibits diffraction efficiency of 58% in the 1st diffraction order at a wavelength of 13.3 nm. This technique will be applicable to a wide range of uses of high efficiency gratings for synchrotron sources, as well as for Free Electron Lasers (FEL)
Recommended from our members
X-ray diffraction gratings: Precise control of ultra-low blaze angle via anisotropic wet etching
Diffraction gratings are used from micron to nanometer wavelengths as dispersing elements in optical instruments. At shorter wavelengths, crystals can be used as diffracting elements, but due to the 3D nature of the interaction with light are wavelength selective rather than wavelength dispersing. There is an urgent need to extend grating technology into the x-ray domain of wavelengths from 1 to 0.1 nm, but this requires the use of gratings that have a faceted surface in which the facet angles are very small, typically less than 1°. Small facet angles are also required in the extreme ultra-violet and soft x-ray energy ranges in free electron laser applications, in order to reduce power density below a critical damage threshold. In this work, we demonstrate a technique based on anisotropic etching of silicon designed to produce very small angle facets with a high degree of perfection
Recommended from our members
X-ray diffraction gratings: Precise control of ultra-low blaze angle via anisotropic wet etching
Diffraction gratings are used from micron to nanometer wavelengths as dispersing elements in optical instruments. At shorter wavelengths, crystals can be used as diffracting elements, but due to the 3D nature of the interaction with light are wavelength selective rather than wavelength dispersing. There is an urgent need to extend grating technology into the x-ray domain of wavelengths from 1 to 0.1 nm, but this requires the use of gratings that have a faceted surface in which the facet angles are very small, typically less than 1°. Small facet angles are also required in the extreme ultra-violet and soft x-ray energy ranges in free electron laser applications, in order to reduce power density below a critical damage threshold. In this work, we demonstrate a technique based on anisotropic etching of silicon designed to produce very small angle facets with a high degree of perfection
Prospects for the expansion of standing wave ambient pressure photoemission spectroscopy to reactions at elevated temperatures
Standing wave ambient pressure photoemission spectroscopy (SWAPPS) is a promising method to investigate chemical and potential gradients across solid-vapor and solid-liquid interfaces under close-to-realistic environmental conditions, far away from high vacuum. Until now, these investigations have been performed only near room temperature, but for a wide range of interfacial processes, chief among them being heterogeneous catalysis, measurements at elevated temperatures are required. One concern in these investigations is the temperature stability of the multilayer mirrors, which generate the standing wave field. At elevated temperatures, degradation of the multilayer mirror due to, for example, interdiffusion between the adjacent layers, decreases the modulation of the standing wave field, thus rendering SWAPPS experiments much harder to perform. Here, we show that multilayer mirrors consisting of alternate B4C and W layers are stable at temperatures exceeding 600 °C and are, thus, promising candidates for future studies of surface and subsurface species in heterogeneous catalytic reactions using SWAPPS