5,073 research outputs found
Erosion versus construction: The origin of Venusian channels
Lava channels are a common feature in the volcanic regions of the Moon, and have now been observed on Venus. There has been much debate about the origin of lunar channels as to whether they are the result of erosional (either thermal or mechanical) or constructional processes. It is necessary to determine the criteria to distinguish between the different types of channels. The clearest evidence is that the presence of levees indicates that the channel experienced a constructional phase for a period. One example of a channel of this type in the southeast region of Aphrodite Terra appears to show both erosional and constructional characteristics. It is approximately 700 km long with an average width of about 1 km. It drops a distance of 700 m from beginning to end, which means that the average slope is 0.06 degrees. Its source may have been a graben situated at the northwest end of the channel. It appears to have different origins along its length. The lack of levees near the source suggests that the channel is erosional in this region. The presence of levees indicates that a constructional phase has occurred. These are formed by lava repeatedly splashing over the channel sides and solidifying. Evidence of levees is seen further away from the source. However, the presence of levees does not mean that the lava was not also eroding and deepening the channel. Thus, in conclusion, our example channel is very sinuous and there is evidence of erosion. There may also have been overflow here. In its middle reaches it roofs over and has the characteristics of a lava tube. In the lower reaches there is strong evidence for the presence of levees indicating construction. On Earth, limited amounts of erosion may occur in basaltic lava channels, although not nearly on the same scale as on the planets just mentioned. For lava erosion on Earth to occur to a comparable extent, excessive eruption times are required. However, low-viscosity komatiite lava may erode to a larger extent and there is direct evidence that carbonatite lava erodes when the underlying strata is also carbonatite. Previously, it has always been assumed that for thermal erosion to occur the flow must be turbulent. Recent findings indicate that this may be a false assumption and that laminar flow may be effective in eroding the substrate
DScent Final Report
DScent was a joint project between five UK universities combining research theories in the disciplines of computational inference, forensic psychology and expert decision-making in the area of counter-terrorism. This document discusses the work carried out by Leeds Metropolitan University which covers the research, design and development work of an investigator support system in the area of deception using artificial intelligence. For the purposes of data generation along with system and hypothesis testing the project team devised two closed world games, the Cutting Corners Board Game and the Location Based Game. DScentTrail presents the investigator with a ‘scent trail’ of a suspect’s behaviour over time, allowing the investigator to present multiple challenges to a suspect from which they may prove the suspect guilty outright or receive cognitive or emotional clues of deception (Ekman 2002; Ekman & Frank 1993; Ekman & Yuille 1989; Hocking & Leathers 1980; Knapp & Comadena 1979). A scent trail is a collection of ordered, relevant behavioural information over time for a suspect. There are links into a neural network, which attempts to identify deceptive behavioural patterns of individuals. Preliminary work was carried out on a behavioural based AI module which would work separately alongside the neural network, with both identifying deception before integrating their results to update DScentTrail. Unfortunately the data that was necessary to design such a system was not provided and therefore, this section of research only reached its preliminary stages. To date research has shown that there are no specific patterns of deceptive behaviour that are consistent in all people, across all situations (Zuckerman 1981). DScentTrail is a decision support system, incorporating artificial intelligence (AI), which is intended to be used by investigators and attempts to find ways around the problem stated by Zuckerman above
DScentTrail: A new way of viewing deception
The DScentTrail System has been created to support and demonstrate research theories in the joint disciplines of computational inference, forensic psychology and expert decision-making in the area of counter-terrorism. DScentTrail is a decision support system, incorporating artificial intelligence, and is intended to be used by investigators. The investigator is presented with a visual representation of a suspect‟s behaviour over time, allowing them to present multiple challenges from which they may prove the suspect guilty outright or receive cognitive or emotional clues of deception. There are links into a neural network, which attempts to identify deceptive behaviour of individuals; the results are fed back into DScentTrail hence giving further enrichment to the information available to the investigator
Leading-edge slat optimization for maximum airfoil lift
A numerical procedure for determining the position (horizontal location, vertical location, and deflection) of a leading edge slat that maximizes the lift of multielement airfoils is presented. The structure of the flow field is calculated by iteratively coupling potential flow and boundary layer analysis. This aerodynamic calculation is combined with a constrained function minimization analysis to determine the position of a leading edge slat so that the suction peak on the nose of the main airfoil is minized. The slat position is constrained by the numerical procedure to ensure an attached boundary layer on the upper surface of the slat and to ensure negligible interaction between the slat wake and the boundary layer on the upper surface of the main airfoil. The highest angle attack at which this optimized slat position can maintain attached flow on the main airfoil defines the optimum slat position for maximum lift. The design method is demonstrated for an airfoil equipped with a leading-edge slat and a trailing edge, single-slotted flap. The theoretical results are compared with experimental data, obtained in the Ames 40 by 80 Foot Wind Tunnel, to verify experimentally the predicted slat position for maximum lift. The experimentally optimized slat position is in good agreement with the theoretical prediction, indicating that the theoretical procedure is a feasible design method
Equine mesenchymal stromal cells and embryo-derived stem cells are immune privileged in vitro
Large-volume lava flow fields on Venus: Dimensions and morphology
Of all the volcanic features identified in Magellan images, by far the most extensive and really important are lava flow fields. Neglecting the widespread lava plains themselves, practically every C1-MIDR produced so far contains several or many discrete lava flow fields. These range in size from a few hundred square kilometers in area (like those fields associated with small volcanic edifices for example), through all sizes up to several hundred thousand square kilometers in extent (such as many rift related fields). Most of these are related to small, intermediate, or large-scale volcanic edifices, coronae, arachnoids, calderas, fields of small shields, and rift zones. An initial survey of 40 well-defined flow fields with areas greater than 50,000 sq km (an arbitrary bound) has been undertaken. Following Columbia River Basalt terminology, these have been termed great flow fields. This represents a working set of flow fields, chosen to cover a variety of morphologies, sources, locations, and characteristics. The initial survey is intended to highlight representative flow fields, and does not represent a statistical set. For each flow field, the location, total area, flow length, flow widths, estimated flow thicknesses, estimated volumes, topographic slope, altitude, backscatter, emissivity, morphology, and source has been noted. The flow fields range from about 50,000 sq km to over 2,500,000 sq km in area, with most being several hundred square kilometers in extent. Flow lengths measure between 140 and 2840 km, with the majority of flows being several hundred kilometers long. A few basic morphological types have been identified
Geologic Mapping of V-19
A geologic map of the Sedna Planitia (V-19) quadrangle is being completed at 1:5,000,000 scale as part of the NASA Planetary Geologic Mapping Program, and will be submitted for review by September 2010. Overview: The Sedna Planitia quadrangle (V-19) extends from 25 N - 50 N latitude, 330 - 0 longitude. The quadrangle contains the northernmost portion of western Eistla Regio and the Sedna Planitia lowlands. Sedna Planitia consists of low-lying plains units, with numerous small volcanic edifices including shields, domes and cones. The quadrangle also contains several tholi, the large flowfield Neago Fluctus, the Manzan-Gurme Tesserae, and Zorile Dorsa and Karra-mahte Fossae which run NW-SE through the southwestern part of the quadrangle. There are six coronae in the quadrangle (Table 1), the largest of which is Nissaba (300 km x 220 km), and there are fourteen impact craters (Table 2). The V-19 quadrangle contains a variety of mappable volcanic landforms including two shield volcanoes (Evaki Tholus and Toci Tholus) and the southern portion of a large flow field (Neago Fluctus). A total of sixteen units associated with volcanoes have been mapped in this quadrangle, with multiple units mapped at Sif Mons, Sachs Patera and Neago Fluctus. An oddly textured, radarbright flow is also mapped in the Sedna plains, which appears to have originated from a several hundred kilometer long fissure. The six coronae within V-19 have a total of eighteen associated flow units. Several edifice fields are also mapped, in which the small volcanic edifices both predate and postdate the other units. Impact crater materials are also mapped
Geologic Mapping of V-19, V-28, and V-53
The Sedna Planitia Quadrangle (V-19) extend from 25 deg N - 50 deg N latitude, 330 deg - 0 deg longitude. The quadrangle contains the northern-most portion of western Eistla Regio and the Sedna Planitia lowlands. Geologic maps of Sedna Planitia (V-199), Hecate Chasma (V-28) quadrangles have been completed at the 1:5,000,000 scale as part of the NASA Planetary Geologic Mapping Program. All quadrangles (V-53, V-28 and V-19) have been reviewed at lease once and will be resubmitted. In V-28 and V-53, more plains materials units have been mapped than in previously mapped quadrangles V-46 and V-39. V-19 is more comparable to these latter maps in terms of numbers of plains units. In V-28, all of the plains materials units to the south of the rift have an unusually high concentration of volcanic edifices, which both predate and postdate the units. A similar situation is seen in V-53 and V-19, where small edifice formation is not confined to any specific time period. In the two chasma-related quadrangles, coronae are located along the rift, as well as to the north and the south of the rifts. Coronae in both quadrangles exhibit all forms of corona topographic shapes, including depressions, rimmed depressions, plateaus and domes. In V-28 and V-53, some coronae along the rift do not have much associated volcanism; coronae with the most volcanism in these quadrangles are located at least 500 km off the rifts or on the Themis Regio highland. All three quadrangles have very horizontal stratigraphic columns, as limited contact between units prevents clear age determinations. While this results in the appearance that all units formed at the same time, the use of hachured columns for each unit illustrates the limited nature of our stratigraphic knowledge in these quadrangles, allowing for numerous possible geologic histories. The scale of resurfacing in these quadrangles is on the scale of 100s of kilometers, consistent with the fact that they lie in the most volcanic region of Venus
Geologic Mapping of V-19
A geologic map of the Sedna Planitia (V-19) quadrangle is being completed at the 1:5,000,000 scale as part of the NASA Planetary Geologic Mapping Program, and will be submitted for review by September 2009
Conduction of topologically-protected charged ferroelectric domain walls
We report on the observation of nanoscale conduction at ferroelectric domain
walls in hexagonal HoMnO3 protected by the topology of multiferroic vortices
using in situ conductive atomic force microscopy, piezoresponse force
microscopy, and kelvin-probe force microscopy at low temperatures. In addition
to previously observed Schottky-like rectification at low bias [Phys. Rev.
Lett., 104, 217601 (2010)], conductance spectra reveal that negatively charged
tail-to-tail walls exhibit enhanced conduction at high forward bias, while
positively charged head-to-head walls exhibit suppressed conduction at high
reverse bias. Our results pave the way for understanding the semiconducting
properties of the domains and domain walls in small-gap ferroelectrics.Comment: 8 pages, 4 figure
- …