167 research outputs found
Smart solar concentrators for building integrated photovoltaic façades
In this study a novel static concentrating photovoltaic (PV) system, suitable for use in windows or glazing façades, has been designed. The developed smart Concentrating PV (CPV) system is lightweight, low cost and able to generate electricity. Additionally, this system automatically responds to climate by varying the balance of electricity generated from the PV with the amount of solar light and heat permitted through it into the building. It therefore offers the potential to contribute to, and control, energy consumption within buildings. A comprehensive optical analysis of the smart CPV is undertaken via 3-D ray tracing technique. To obtain optimal overall optical performance of the novel smart CPV analysis has been based upon all necessary design parameters including the average reflectivity of the thermotropic reflective layer, the glazing cover dimension, the glazing cover materials as well as the dimensions of the solar cells. In addition, a hydroxypropyl cellulose (HPC) hydrogel polymer, suitable for use as the reflective thermotropic layer for the smart CPV system, was synthesized and experimentally studied
GaN directional couplers for integrated quantum photonics
Large cross-section GaN waveguides are proposed as a suitable architecture to
achieve integrated quantum photonic circuits. Directional couplers with this
geometry have been designed with aid of the beam propagation method and
fabricated using inductively coupled plasma etching. Scanning electron
microscopy inspection shows high quality facets for end coupling and a well
defined gap between rib pairs in the coupling region. Optical characterization
at 800 nm shows single-mode operation and coupling-length-dependent splitting
ratios. Two photon interference of degenerate photon pairs has been observed in
the directional coupler by measurement of the Hong-Ou-Mandel dip with 96%
visibility.Comment: 4 pages, 5 figure
Ultrafast Switching from the Charge Density Wave Phase to a Metastable Metallic State in 1T-TiSe
The ultrafast electronic structures of the charge density wave material
1T-TiSe were investigated by high-resolution time- and angle-resolved
photoemission spectroscopy. We found that the quasiparticle populations drove
ultrafast electronic phase transitions in 1T-TiSe within 100 fs after
photoexcitation, and a metastable metallic state, which was significantly
different from the equilibrium normal phase, was evidenced far below the charge
density wave transition temperature. Detailed time- and pump-fluence-dependent
experiments revealed that the photoinduced metastable metallic state was a
result of the halted motion of the atoms through the coherent electron-phonon
coupling process, and the lifetime of this state was prolonged to picoseconds
with the highest pump fluence used in this study. Ultrafast electronic dynamics
were well captured by the time-dependent Ginzburg-Landau model. Our work
demonstrates a mechanism for realizing novel electronic states by photoinducing
coherent motion of atoms in the lattice.Comment: 13 Pages, 10 figure
Evolution of Maximum Bending Strain on Poisson's Ratio Distribution
In recent years, new flexible functional materials have attracted increasing
interest, but there is a lack of the designing mechanisms of flexibility design
with superstructures. In traditional engineering mechanics, the maximum bending
strain (MBS) was considered universal for describing the bendable properties of
a given material, leading to the universal designing method of lowering the
dimension such as thin membranes designed flexible functional materials.In this
work, the MBS was found only applicable for materials with uniformly
distributed Poisson's ratio, while the MBS increases with the thickness of the
given material in case there is a variation Poisson's ratio in different areas.
This means the MBS can be enhanced by certain Poisson's ratio design in the
future to achieve better flexibility of thick materials. Here, the inorganic
freestanding nanofiber membranes, which have a nonconstant Poisson's ratio
response on stress/strain for creating nonuniformly distributed Poisson's ratio
were proven applicable for designing larger MBS and lower Young's modulus for
thicker samples
Metallic vanadium disulfide nanosheets as a platform material for multifunctional electrode applications
Nano-thick metallic transition metal dichalcogenides such as VS are
essential building blocks for constructing next-generation electronic and
energy-storage applications, as well as for exploring unique physical issues
associated with the dimensionality effect. However, such 2D layered materials
have yet to be achieved through either mechanical exfoliation or bottom-up
synthesis. Herein, we report a facile chemical vapor deposition route for
direct production of crystalline VS nanosheets with sub-10 nm thicknesses
and domain sizes of tens of micrometers. The obtained nanosheets feature
spontaneous superlattice periodicities and excellent electrical conductivities
(~310 S cm), which has enabled a variety of applications
such as contact electrodes for monolayer MoS with contact resistances of
~1/4 to that of Ni/Au metals, and as supercapacitor electrodes in aqueous
electrolytes showing specific capacitances as high as 8.610 F
g. This work provides fresh insights into the delicate
structure-property relationship and the broad application prospects of such
metallic 2D materials.Comment: 23 pages, 5 figue
A Novel Radar Sensor for the Non-Contact Detection of Speech Signals
Different speech detection sensors have been developed over the years but they are limited by the loss of high frequency speech energy, and have restricted non-contact detection due to the lack of penetrability. This paper proposes a novel millimeter microwave radar sensor to detect speech signals. The utilization of a high operating frequency and a superheterodyne receiver contributes to the high sensitivity of the radar sensor for small sound vibrations. In addition, the penetrability of microwaves allows the novel sensor to detect speech signals through nonmetal barriers. Results show that the novel sensor can detect high frequency speech energies and that the speech quality is comparable to traditional microphone speech. Moreover, the novel sensor can detect speech signals through a nonmetal material of a certain thickness between the sensor and the subject. Thus, the novel speech sensor expands traditional speech detection techniques and provides an exciting alternative for broader application prospects
Multiple organ infection and the pathogenesis of SARS
After >8,000 infections and >700 deaths worldwide, the pathogenesis of the new infectious disease, severe acute respiratory syndrome (SARS), remains poorly understood. We investigated 18 autopsies of patients who had suspected SARS; 8 cases were confirmed as SARS. We evaluated white blood cells from 22 confirmed SARS patients at various stages of the disease. T lymphocyte counts in 65 confirmed and 35 misdiagnosed SARS cases also were analyzed retrospectively. SARS viral particles and genomic sequence were detected in a large number of circulating lymphocytes, monocytes, and lymphoid tissues, as well as in the epithelial cells of the respiratory tract, the mucosa of the intestine, the epithelium of the renal distal tubules, the neurons of the brain, and macrophages in different organs. SARS virus seemed to be capable of infecting multiple cell types in several organs; immune cells and pulmonary epithelium were identified as the main sites of injury. A comprehensive theory of pathogenesis is proposed for SARS with immune and lung damage as key features
MRI of Auto-Transplantation of Bone Marrow-Derived Stem-Progenitor Cells for Potential Repair of Injured Arteries
This study was to validate the feasibility of using clinical 3.0T MRI to monitor the migration of autotransplanted bone marrow (BM)-derived stem-progenitor cells (SPC) to the injured arteries of near-human sized swine for potential cell-based arterial repair.The study was divided into two phases. For in vitro evaluation, BM cells were extracted from the iliac crests of 13 domestic pigs and then labeled with a T2 contrast agent, Feridex, and/or a fluorescent tissue marker, PKH26. The viability, the proliferation efficiency and the efficacies of Feridex and/or PKH26 labeling were determined. For in vivo validation, the 13 pigs underwent endovascular balloon-mediated intimal damages of the iliofemoral arteries. The labeled or un-labeled BM cells were autotransplanted back to the same pig from which the BM cells were extracted. Approximately three weeks post-cell transplantation, 3.0T T2-weighted MRI was performed to detect Feridex-created signal voids of the transplanted BM cells in the injured iliofemoral arteries, which was confirmed by subsequent histologic correlation.Of the in vitro study, the viability of dual-labeled BM cells was 95-98%. The proliferation efficiencies of dual-labeled BM cells were not significantly different compared to those of non-labeled cells. The efficacies of Feridex- and PKH26 labeling were 90% and 100%, respectively. Of the in vivo study, 3.0T MRI detected the auto-transplanted BM cells migrated to the injured arteries, which was confirmed by histologic examinations.This study demonstrates the capability of using clinical 3.0T MRI to monitor the auto-transplantation of BM cells that migrate to the injured arteries of large animals, which may provide a useful MRI technique to monitor cell-based arterial repair
Magnetic Resonance Imaging of Bone Marrow Cell-Mediated Interleukin-10 Gene Therapy of Atherosclerosis
A characteristic feature of atherosclerosis is its diffuse involvement of arteries across the entire human body. Bone marrow cells (BMC) can be simultaneously transferred with therapeutic genes and magnetic resonance (MR) contrast agents prior to their transplantation. Via systemic transplantation, these dual-transferred BMCs can circulate through the entire body and thus function as vehicles to carry genes/contrast agents to multiple atherosclerosis. This study was to evaluate the feasibility of using in vivo MR imaging (MRI) to monitor BMC-mediated interleukin-10 (IL-10) gene therapy of atherosclerosis.For in vitro confirmation, donor mouse BMCs were transduced by IL-10/lentivirus, and then labeled with a T2-MR contrast agent (Feridex). For in vivo validation, atherosclerotic apoE(-/-) mice were intravenously transplanted with IL-10/Feridex-BMCs (Group I, n = 5) and Feridex-BMCs (Group II, n = 5), compared to controls without BMC transplantation (Group III, n = 5). The cell migration to aortic atherosclerotic lesions was monitored in vivo using 3.0T MRI with subsequent histology correlation. To evaluate the therapeutic effect of BMC-mediated IL-10 gene therapy, we statistically compared the normalized wall indexes (NWI) of ascending aortas amongst different mouse groups with various treatments.Of in vitro experiments, simultaneous IL-10 transduction and Feridex labeling of BMCs were successfully achieved, with high cell viability and cell labeling efficiency, as well as IL-10 expression efficiency (≥90%). Of in vivo experiments, MRI of animal groups I and II showed signal voids within the aortic walls due to Feridex-created artifacts from the migrated BMCs in the atherosclerotic plaques, which were confirmed by histology. Histological quantification showed that the mean NWI of group I was significantly lower than those of group II and group III (P<0.05).This study has confirmed the possibility of using MRI to track, in vivo, IL-10/Feridex-BMCs recruited to atherosclerotic lesions, where IL-10 genes function to prevent the progression of atherosclerosis
- …