Ruthenium polypyridyl complexes and their modes of interaction with DNA : is there a correlation between these interactions and the antitumor activity of the compounds?

Various interaction modes between a group of six ruthenium polypyridyl complexes and DNA have been studied using a number of spectroscopic techniques. Five mononuclear species were selected with formula [Ru(tpy) L1L2](2-n)?, and one closely related dinuclear cation of formula [{Ru(apy)(tpy)}2{l-H2N(CH2)6NH2}]4?. The ligand tpy is 2,20:60,200-terpyridine and the ligand L1 is a bidentate ligand, namely, apy (2,20-azobispyridine), 2-phenylazopyridine, or 2-phenylpyridinylmethylene amine. The ligand L2 is a labile monodentate ligand, being Cl-, H2O, or CH3CN. All six species containing a labile L2 were found to be able to coordinate to the DNA model base 9-ethylguanine by 1H NMR and mass spectrometry. The dinuclear cationic species, which has no positions available for coordination to a DNA base, was studied for comparison purposes. The interactions between a selection of four representative complexes and calf-thymus DNA were studied by circular and linear dichroism. To explore a possible relation between DNA-binding ability and toxicity, all compounds were screened for anticancer activity in a variety of cancer cell lines, showing in some cases an activity which is comparable to that of cisplatin. Comparison of the details of the compound structures, their DNA binding, and their toxicity allows the exploration of structure–activity relationships that might be used to guide optimization of the activity of agents of this class of compounds

Orientational Effects and Random Mixing in 1‑Alkanol + Nitrile Mixtures

1-Alkanol + alkanenitrile or + benzonitrile systems have been investigated by means of the molar excess functionsenthalpies (Hm E ), isobaric heat capacities (Cp,m E ), volumes (Vm E ), and entropiesand using the Flory model and the concentration−concentration structure factor (SCC(0)) formalism. From the analysis of the experimental data available in the literature, it is concluded that interactions are mainly of dipolar type. In addition, large Hm E values contrast with rather low Vm E values, indicating the existence of strong structural effects. Hm E measurements have been used to evaluate the enthalpy of the hydroxyl−nitrile interactions (ΔHOH−CN). They are stronger in methanol systems and become weaker when the alcohol size increases. In solutions with a given short chain 1-alkanol (up to 1-butanol), the replacement of ethanenitrile by butanenitrile weakens the mentioned interactions. Application of the Flory model shows that orientational effects exist in methanol or 1- nonanol, or 1-decanol + ethanenitrile mixtures. In the former solution, this is due to the existence of interactions between unlike molecules. For mixtures including 1-nonanol or 1-decanol, the systems at 298.15 K are close to their UCST (upper critical solution temperature), and interactions between like molecules are dominant. Orientational effects also are encountered in methanol or ethanol + butanenitrile mixtures because self-association of the alcohol plays a more important role. Aromaticity effect seems to enhance orientational effects. For the remainder of the systems under consideration, the random mixing hypothesis is attained to a rather large extent. Results from the application of the SCC(0) formalism show that homocoordination is the dominant trend in the investigated solutions, and are consistent with those obtained from the Flory model

Woodallite, a new chromium analogue of iowaite from the Mount Keith nickel deposit, Western Australia

AbstractWoodallite is a new Cr-rich member of the hydrotalcite group from the large, low-grade Mount Keith nickel deposit, in the northeastern Goldfields district of Western Australia. Woodallite occurs as whorls and clusters of minute platelets up to 6 mm across in lizardite+brucite-altered dunite. Individual platelets are typically 10–100 µm in maximum dimension and are often curved. Associated minerals include chromite, lizardite, iowaite, pentlandite, magnetite, tochilinite and brucite. Electron microprobe analysis gave: Mg 25.90 wt.%; Cr 10.81; Fe 4.86; Al 0.68; Cl 9.89; S 0.03; Si 0.01; Ni 0.01; Na 0.01, yielding (after correction for loss of volatiles) an empirical formula of Mg6.19(Cr1.21Fe0.51Al0.15)∑1.87(OH)16[Cl1.62(CO3)0.17(SO4)0.01]·4H2O, by analogy with the hydrotalcite group. The simplified formula is Mg6Cr2(OH)16Cl2·4H2O. Combined thermogravimetric analysis and mass spectroscopy showed a two-stage weight loss of 12.7% and 27.3% occurring over the ranges 25–300°C and 300–660°C, respectively. The first weight loss is attributed to loss of interlayer water, chlorine-bearing species (e.g. HCl) and some CO2, the second to loss of hydroxide water, remaining CO2 and Cl species. The mineral is deep magenta to purple in colour, transparent, with a resinous to waxy lustre, and a perfect basal {0001} cleavage. Woodallite has a Mohs hardness of 1.5–2, and a pale-pink to white streak. The strongest lines in the X-ray powder pattern are [dobs (Iobs) (hkl)] 8.037 (100) (003); 4.021 (48) (006); 2.679 (1) (009); 2.624 (3) (012); 2.349 (5) (015); 2.007 (6) (0,0,12); 1.698 (2) (0,1,11); 1.524 (2) (23). These lines were indexed on a hexagonal cell with a = 3.103(2), c = 24.111(24)Å, V = 201.14 Å3 and Z = 3/8. The new mineral is isostructural with the hydrotalcite group and has space group Rm. The measured density is 2.062 gm/cm3. Woodallite is uniaxial negative with ω = 1.555 and ε = 1.535 (white light); pleochroism is distinct from violet to pinkish lilac. Woodallite forms as a result of hydrothermal alteration of primary magmatic chromite by Clrich solutions at temperatures <320°C. Relict chromite fragments are frequently present in the whorls, and associated magnetite is altered extensively to iowaite. The mineral is named after Roy Woodall, eminent Australian industry geologist.B. A. Grguric, I. C. Madsen, A. Prin

Design and Evaluation of Personalized Services to Foster Active Aging: The Experience of Technology Pre-Validation in Italian Pilots

Assistive devices could promote independent living and support the active and healthy aging of an older population; however, several factors can badly influence the long-term use of new technologies. In this context, this paper presents a two-step methodology called “pre-validation” that aims to identify the factors that can bias the use of new services, thus minimizing the risk of an unsuccessful longer trial. The proposed pre-validation methodology is composed of two main phases that aim to assess the usability and the reliability of the technology assessed in a laboratory environment and the usability, acceptability, user experience, and reliability of the technology in real environments. The tested services include the socialization scenario, in which older adults are better connected to the community via technological solutions (i.e., socialization applications), and the monitoring scenario, which allows for the introduction of timely interventions (technologies involved include environmental monitoring sensors, a telepresence robot, wearable sensors, and a personalized dashboard). The obtained results underline an acceptable usability level (average System Usability Scale score > 65) for the tested technologies (i.e., socialization applications and a telepresence robot). Phase Two also underlines the good acceptability, user experience, and usability of the tested services. The statistical analysis underlines a correlation between the stress related to the use of technology, digital skills, and intention of use, among other factors. Qualitative feedback also remarks on a correlation between older adults with low digital skills and an anxiety about using technology. Positive correlation indexes were highlighted between the trust and usability scores. Eventually, future long-term trials with assistive technology should rely on motivated caregivers, be founded on a strong recruitment process, and should reassure older adults—especially the ones with low digital literacy—about the use of technology by proposing personalized training and mentoring, if necessary, to increase the trust

Dissolved nutrient release from solid wastes of southern bluefin tuna (Thunnus maccoyii Castelnau) aquaculture

© 2008 IngentaFinfish pens are point sources of dissolved nutrients released from fish metabolism or degradation of solid wastes. Nutrients leaching from uneaten feed and faeces are not usually quantified in mass budgets for these systems, leading to an overestimation of fish retention or deposition to the seabed. In this study, we investigated nutrient leaching from pellets and baitfish feed as well as faeces of southern bluefin tuna (Thunnus maccoyii) into seawater. Faeces were nitrogen depleted (51-54mg N g−1 dw) and phosphorus enriched (62-72 mg P g−1 dw) compared with feeds (83-111 mg N g−1 dw and 17-21 mg P g−1 dw). Less phosphorus was available for leaching from pellets and faeces of pellet-fed tuna (5-6%) than from baitfish and faeces of baitfish-fed tuna (17-21%). The proportion of soluble nitrogen in pellets (15%) was also lower than in baitfish and faeces (35-43%). Leaching loads for a feed conversion ratio of 5 were estimated as 22 and 26 kg N tonne−1 growth when baitfish or pellets were used as feed respectively. Phosphorus loads were estimated as 15 and 4 kg P tonne−1 growth respectively. More than 90% of nitrogen loads, and approximately 50% of phosphorus, are likely to be released into seawater before solid wastes reach the seafloor