501 research outputs found

    Design of Wireless Sensor Nodes for Structural Health Monitoring applications

    Get PDF
    Enabling low-cost distributed monitoring, wireless sensor networks represents an interesting solution for the implementation of structural health monitoring systems. This work deals with the design of wireless sensor networks for health monitoring of civil structures, specifically focusing on node design in relation to the requirements of different structural monitoring application classes. Design problems are analysed with specific reference to a large-scale experimental setup (the long-term structural monitoring of the Basilica S. Maria di Collemaggio, L’Aquila, Italy). Main limitations emerged are highlighted, and adopted solution strategies are outlined, both in the case of commercial sensing platform and of full custom solutions

    Sulforaphane causes cell cycle arrest and apoptosis in human glioblastoma u87mg and u373mg cell lines under hypoxic conditions

    Get PDF
    Glioblastoma multiforme (GBM) is the most prevalent and aggressive primary brain tumor. The median survival rate from diagnosis ranges from 15 to 17 months because the tumor is resistant to most therapeutic strategies. GBM exhibits microvascular hyperplasia and pronounced necrosis triggered by hypoxia. Sulforaphane (SFN), an isothiocyanate derived from cruciferous vegetables, has already demonstrated the ability to inhibit cell proliferation, by provoking cell cycle arrest, and leading to apoptosis in many cell lines. In this study, we investigated the antineoplastic effects of SFN [20–80 µM for 48 h] in GBM cells under normoxic and hypoxic conditions. Cell viability assays, flow cytometry, and Western blot results revealed that SFN could induce apoptosis of GBM cells in a dose-dependent manner, under both conditions. In particular, SFN significantly induced caspase 3/7 activation and DNA fragmentation. Moreover, our results demonstrated that SFN suppressed GBM cells proliferation by arresting the cell cycle at the S-phase, also under hypoxic condition, and that these effects may be due in part to its ability to induce oxidative stress by reducing glutathione levels and to increase the phosphorylation of extracellular signal-regulated kinases (ERKs). Overall, we hypothesized that SFN treatment might serve as a potential therapeutic strategy, alone or in combination, against GBM

    Tailored Torsion and Bending-Resistant Avian-Inspired Structures

    Get PDF
    The escalating demand for torsion- and bending-resistant structures paired with the need for more efficient use of materials and geometries, have led to novel bio-inspired ingenious solutions. However, lessons from Nature could be as inspiring as they are puzzling: plants and animals offer an enormous range of promising but hierarchically complex configurations. Avian bones are prominent candidates for addressing the torsional and bending issue. They present a unique intertwining of simple components: helicoidal ridges and crisscrossing struts, able to bear flexural and twisting actions of winds. Here, it is set how to harmonically move from the natural to the engineering level to formalize and analyze the biological phenomena under controlled design conditions. The effect of ridges and struts is isolated and combined toward tailored torsion and bending-resistant arrangements. Then the biological level is revisited to extrapolate the avian allometric design approach and is translated into multiscale lightweight structures at the engineering level. This study exploits the complexity of Nature and the scalability that characterizes the evolutionary design of bird bones through the design and fabrication versatility allowed by additive manufacturing technologies. This paves the way for exploring the transferability of the proposed solution at multiple engineering scales

    VALUTATION OF OFFICIAL MOUSE BIOASSAY FOR THE DETECTION OF LIPOPHILIC MARINE TOXINS

    Get PDF
    The official biotoxicological (MBA) method for the determination of lipophilic marine toxins shows important gaps with regard to reproducibility, specificity and quality of the data provided and serious ethical contraindications. The Commission Regulation (EU) No 15/2011 establishes the date of December 31, 2014 as the deadline for replacement of the mouse test with a LC-MS/MS method by the laboratories of the member states responsible for the monitoring of marine biotoxins. In order to facilitate the interpretation of the MBA during this transition period, we further evaluated the specificity and selectivity of this assay in comparison with a LC-MS/MS method in detecting lipophilic marine toxins on mussels of the middle Adriatic Sea. Data show a high percentage of false-positive results on MBA due to interference by yessotoxins. It was also possible to evaluate the toxic profile of the samples analyzed

    Design and 3D printing of a modular phantom of a uterus for medical device validation

    Get PDF
    PurposeThe purpose of this study is to describe the design and validation of a three-dimensional (3D)-printed phantom of a uterus to support the development of uterine balloon tamponade devices conceived to stop post-partum haemorrhages (PPHs). Design/methodology/approachThe phantom 3D model is generated by analysing the main requirements for validating uterine balloon tamponade devices. A modular approach is implemented to guarantee that the phantom allows testing these devices under multiple working conditions. Once finalised the design, the phantom effectiveness is validated experimentally. FindingsThe modular phantom allows performing the required measurements for testing the performance of devices designed to stop PPH. Social implicationsPPH is the leading obstetric cause of maternal death worldwide, mainly in low- and middle-income countries. The proposed phantom could speed up and optimise the design and validation of devices for PPH treatment, reducing the maternal mortality ratio. Originality/valueTo the best of the authors' knowledge, the 3D-printed phantom represents the first example of a modular, flexible and transparent uterus model. It can be used to validate and perform usability tests of medical devices

    Diagnostic and therapeutic aspects of hemiplegic migraine

    Get PDF
    Hemiplegic migraine (HM) is a clinically and genetically heterogeneous condition with attacks of headache and motor weakness which may be associated with impaired consciousness, cerebellar ataxia and intellectual disability. Motor symptoms usually last <72 hours and are associated with visual or sensory manifestations, speech impairment or brainstem aura. HM can occur as a sporadic HM or familiar HM with an autosomal dominant mode of inheritance. Mutations in CACNA1A, ATP1A2 and SCN1A encoding proteins involved in ion transport are implicated. The pathophysiology of HM is close to the process of typical migraine with aura, but appearing with a lower threshold and more severity. We reviewed epidemiology, clinical presentation, diagnostic assessment, differential diagnosis and treatment of HM to offer the best evidence of this rare condition. The differential diagnosis of HM is broad, including other types of migraine and any condition that can cause transitory neurological signs and symptoms. Neuroimaging, cerebrospinal fluid analysis and electroencephalography are useful, but the diagnosis is clinical with a genetic confirmation. The management relies on the control of triggering factors and even hospitalisation in case of long-lasting auras. As HM is a rare condition, there are no randomised controlled trials, but the evidence for the treatment comes from small studies

    MEG Upgrade Proposal

    Full text link
    We propose the continuation of the MEG experiment to search for the charged lepton flavour violating decay (cLFV) \mu \to e \gamma, based on an upgrade of the experiment, which aims for a sensitivity enhancement of one order of magnitude compared to the final MEG result, down to the 6×10146 \times 10^{-14} level. The key features of this new MEG upgrade are an increased rate capability of all detectors to enable running at the intensity frontier and improved energy, angular and timing resolutions, for both the positron and photon arms of the detector. On the positron-side a new low-mass, single volume, high granularity tracker is envisaged, in combination with a new highly segmented, fast timing counter array, to track positron from a thinner stopping target. The photon-arm, with the largest liquid xenon (LXe) detector in the world, totalling 900 l, will also be improved by increasing the granularity at the incident face, by replacing the current photomultiplier tubes (PMTs) with a larger number of smaller photosensors and optimizing the photosensor layout also on the lateral faces. A new DAQ scheme involving the implementation of a new combined readout board capable of integrating the diverse functions of digitization, trigger capability and splitter functionality into one condensed unit, is also under development. We describe here the status of the MEG experiment, the scientific merits of the upgrade and the experimental methods we plan to use.Comment: A. M. Baldini and T. Mori Spokespersons. Research proposal submitted to the Paul Scherrer Institute Research Committee for Particle Physics at the Ring Cyclotron. 131 Page

    Measurement of the radiative decay of polarized muons in the MEG experiment

    Get PDF
    We studied the radiative muon decay μ+e+ννˉγ\mu^+ \to e^+\nu\bar{\nu}\gamma by using for the first time an almost fully polarized muon source. We identified a large sample (~13000) of these decays in a total sample of 1.8x10^14 positive muon decays collected in the MEG experiment in the years 2009--2010 and measured the branching ratio B(μ+e+ννˉγ\mu^+ \to e^+\nu\bar{\nu}\gamma) = (6.03+-0.14(stat.)+-0.53(sys.))x10^-8 for E_e > 45 MeV and E_{\gamma} > 40 MeV, consistent with the Standard Model prediction. The precise measurement of this decay mode provides a basic tool for the timing calibration, a normalization channel, and a strong quality check of the complete MEG experiment in the search for μ+e+γ\mu^+ \to e^+\gamma process.Comment: 8 pages, 7 figures. Added an introduction to NLO calculation which was recently calculated. Published versio

    New constraint on the existence of the mu+-> e+ gamma decay

    Get PDF
    The analysis of a combined data set, totaling 3.6 \times 10^14 stopped muons on target, in the search for the lepton flavour violating decay mu^+ -> e^+ gamma is presented. The data collected by the MEG experiment at the Paul Scherrer Institut show no excess of events compared to background expectations and yield a new upper limit on the branching ratio of this decay of 5.7 \times 10^-13 (90% confidence level). This represents a four times more stringent limit than the previous world best limit set by MEG.Comment: 5 pages, 3 figures, a version accepted in Phys. Rev. Let
    corecore