32,637 research outputs found
Designing a visible city for visually impaired users
This paper reports on an ongoing doctoral research project which aims to identify the main barriers to access within the built environment for persons with a visual impairment. The research seeks to investigate whether these barriers are common for all types of visual impairment and degree of vision loss and if so, what inclusive design solutions can accommodate the needs of the majority of visually impaired users. An access audit has been conducted within Glasgow city centre which sought to quantify the number and type of hazards present within a typical built environment. This was followed up by a questionnaire which asked participants to rate factors which may prevent them from making independent visits to their nearest city centre including psychological factors, physical features and obstructions resulting from the presence of street furniture. Participants also indicated the colours and contrasts which they find easiest to detect within the built environment. These findings will be used to inform the creation of a new set of design guidelines to assist designers, architects and urban planners as to how they can provide more accessible and inclusive environments for the visually impaired population
An experimental investigation of unstable combustion in solid propellant rocket motors
Unstable combustion in solid propellant rocket motors is
characterized by high frequency chamber pressure oscillations, often accompanied by changes in the mean burning rate. Experiments with casebonded, cylindrically perforated motors using a polysulfide, ammoniumperchlorate
propellant were reproducible as a result of careful manufacturing control and extended propellant curing time. In these motors the oscillations were in the fundamental standing tangential mode and were accompanied by increases in the average burning rate. At sufficiently high pressure levels all firings were stable. Reduction of the operating
level led to mild instability. A sufficient further reduction produced a sudden change to maximum instability. Continued reduction in pressure level from this point resulted in a gradual decrease in the degree of
instability but it could not be experimentally verified that a low pressure stable region existed. The levels at which these events took place were frequency dependent and generally increased as the tangential frequency was reduced. At a given operating leve1, the instability
became less severe when the grain length was reduced below a critical value. Increasing the length above the critical value did not affect the level at which the motors became stable. The pressure levels for stability and for maximum instability moved to lower values with decreases in the propellant grain temperature in a manner not entirely accounted for by the effect of grain temperature on burning rate. Stable, mildly unstable and severely unstable operation was observed throughout the range -80°F to
180°F. The maximum instability decreased with grain temperature
Improved method of producing oxide-dispersion-strengthened alloys
Dispersion strengthened alloys having the required properties are produced by a process in which the refractory particles are less than 100 to 500 A thick. These are fine enough to ensure the strength characteristics without appreciable degradation of other characteristics. The alloy consists of a matrix metal and a dispersoid metal
Optimal Transmit Covariance for Ergodic MIMO Channels
In this paper we consider the computation of channel capacity for ergodic
multiple-input multiple-output channels with additive white Gaussian noise. Two
scenarios are considered. Firstly, a time-varying channel is considered in
which both the transmitter and the receiver have knowledge of the channel
realization. The optimal transmission strategy is water-filling over space and
time. It is shown that this may be achieved in a causal, indeed instantaneous
fashion. In the second scenario, only the receiver has perfect knowledge of the
channel realization, while the transmitter has knowledge of the channel gain
probability law. In this case we determine an optimality condition on the input
covariance for ergodic Gaussian vector channels with arbitrary channel
distribution under the condition that the channel gains are independent of the
transmit signal. Using this optimality condition, we find an iterative
algorithm for numerical computation of optimal input covariance matrices.
Applications to correlated Rayleigh and Ricean channels are given.Comment: 22 pages, 14 figures, Submitted to IEEE Transactions on Information
Theor
Modeling multiple time scales during glass formation with phase-field crystals
The dynamics of glass formation in monatomic and binary liquids are studied
numerically using a microscopic field theory for the evolution of the
time-averaged atomic number density. A stochastic framework combining phase
field crystal free energies and dynamic density functional theory is shown to
successfully describe several aspects of glass formation over multiple time
scales. Agreement with mode coupling theory is demonstrated for underdamped
liquids at moderate supercoolings, and a rapidly growing dynamic correlation
length is found to be associated with fragile behavior.Comment: 4+ pages, 4 figures, to appear in Physical Review Letter
Demonstration test of burner liner strain measurements using resistance strain gages
A demonstration test of burner liner strain measurements using resistance strain gages as well as a feasibility test of an optical speckle technique for strain measurement are presented. The strain gage results are reported. Ten Kanthal A-1 wire strain gages were used for low cycle fatigue strain measurements to 950 K and .002 apparent strain on a JT12D burner can in a high pressure (10 atmospheres) burner test. The procedure for use of the strain gages involved extensive precalibration and postcalibration to correct for cooling rate dependence, drift, and temperature effects. Results were repeatable within + or - .0002 to .0006 strain, with best results during fast decels from 950 K. The results agreed with analytical prediction based on an axisymmetric burner model, and results indicated a non-uniform circumferential distribution of axial strain, suggesting temperature streaking
Optical enhancement of photomultiplier sensitivity
Transmission and reflection light losses are reduced by introducing light into end-window of device at an angle large enough to normal so total internal reflection occurs at both photocathode-vacuum and window-air interfaces
Portable remote laser sensor for methane leak detection
A portable laser system for remote detection of methane gas leaks and concentrations is disclosed. The system transmitter includes first and second lasers, tuned respectively to a wavelength coincident with a strong absorption line of methane and a reference wavelength which is weakly absorbed by methane gas. The system receiver includes a spherical mirror for collecting the reflected laser radiation and focusing the collected radiation through a narrowband optical filter onto an optial detector. The filter is tuned to the wavelength of the two lasers, and rejects background noise. The output of the optical detector is processed by a lock-in detector synchronized to the chopper, and which measures the difference between the first wavelength signal and the reference wavelength signal
High temperature strain gage technology for hypersonic aircraft development applications
An experimental evaluation of Pd 13 percent Cr and of BCL-3 alloy wire strain gages was conducted on IN100 and Cu 0.15 percent Zr alloy substrates. Testing included apparent strain, drift, gage factor, and creep. Maximum test temperature was 1144 K (1600 F). The PdCr gages incorporated Pt temperature compensation elements. The PdCr gages were found to have good resistance stability below 866 K (1100 F). The BCL 3 gages were found to have good resistance stability above 800 K (981 F), but high drift around 700 K (800 F)
- …