Segregation Behaviour of Third Generation Advanced High-Strength Mn-Al Steels

The paper addresses the macro- and microsegregation of alloying elements in the new-developed Mn-Al TRIP steels, which belong to the third generation of advanced high-strength steels (AHSS) used in the automotive industry. The segregation behaviour both in the as-cast state and after hot forging was assessed in the macro scale by OES and by EDS measurements in different structural constituents. The structural investigations were carried out using light and scanning electron microscopy. A special attention was paid to the effect of Nb microaddition on the structure and the segregation of alloying elements. The tendency of Mn and Al to macrosegregation was found. It is difficult to remove in Nb-free steels. Microsegregation of Mn and Al between austenite and ferritic structural constituents can be removed

Supercurrent-phase relationship of a Nb/InAs(2DES)/Nb Josephson junction in overlapping geometry

Superconductor/normal conductor/superconductor (SNS) Josephson junctions with highly transparent interfaces are predicted to show significant deviations from sinusoidal supercurrent-phase relationships (CPR) at low temperatures. We investigate experimentally the CPR of a ballistic Nb/InAs(2DES)/Nb junction in the temperature range from 1.3 K to 9 K using a modified Rifkin-Deaver method. The CPR is obtained from the inductance of the phase-biased junction. Transport measurements complement the investigation. At low temperatures, substantial deviations of the CPR from conventional tunnel-junction behavior have been observed. A theoretical model yielding good agreement to the data is presented.Comment: RevTex4, 4 pages including 3 figure

Modification of Non-Metallic Inclusions by Rare-Earth Elements in Microalloyed Steels

The modification of the chemical composition of non-metallic inclusions by rare-earth elements in the new-developed microalloyed steels was discussed in the paper. The investigated steels are assigned to production of forged elements by thermo- mechanical treatment. The steels were melted in a vaccum induction furnace and modification of non-metallic inclusions was carried out by the michmetal in the amount of 2.0 g per 1 kg of steel. It was found that using material charge of high purity and a realization of metallurgical process in vacuous conditions result in a low concentration of sulfur (0.004%), phosphorus (from 0.006 to 0.008%) and oxygen (6 ppm). The high metallurgical purity is confirmed by a small fraction of non-metallic inclusions averaging 0.075%. A large majority of non-metallic inclusions are fine, globular oxide-sulfide or sulfide particles with a mean size 17m2. The chemical composition and morphology of non-metallic inclusions was modified by Ce, La and Nd, what results a small deformability of non- metallic inclusions during hot-working

Switchable resonant coupling of flux qubits

We propose a coupling scheme, where two or more flux qubits with different eigenfrequencies share Josephson junctions with a coupler loop devoid of its own quantum dynamics. Switchable two-qubit coupling is realized by tuning the frequency of the AC magnetic flux through the coupler to a combination frequency of two of the qubits. The coupling allows any or all of the qubits to be simultaneously at the degeneracy point and can change sign.Comment: REVTeX 4, 4 pages, 2 figures, v2: reference added, v3: final version published in Phys. Rev.

How to test the "quantumness" of a quantum computer?

We discuss whether, to what extent and how a quantum computing device can be evaluated and simulated using classical tools.Comment: Submitted 12.10.201

Superconducting gap parameters of MgB2 obtained on MgB2/Ag and MgB2/In junctions

MgB2 superconducting wires with critical temperature Tc approaching 40 K were used for preparation of MgB2/Ag and MgB2/In junctions. The differential conductance vs. voltage characteristics of N-S junctions exhibit clear contribution of Andreev reflection. Using modified BTK theory for s-wave superconductors two order parameters 4 meV and 2.6 meV have been determined from temperature dependencies. Surprisingly, larger order parameter vanishes at lower temperature ~20 K than smaller one with Tc 38 K. Both the magnitudes of the order parameters and their critical temperatures are in good agreement with theoretical calculations of electron-phonon coupling in MgB$_2$ carried out by Liu et al.Comment: revised manuscrip