17 research outputs found
Electrocoagulation treatment of raw palm oil mill effluent : Optimization process using high current application
In the electrocoagulation wastewater treatment process, extremely polluted water treatment requires an effective technique, and using high current is one of those. This study aims to optimize electrocoagulation parameters such as operation time, electrodes gap and the initial pH by applying high current intensity to treat palm oil mill effluent (POME) via Box–Behnken design (BBD) method. Chemical oxygen demand (COD), biological oxygen demand (BOD), and suspended solids (SS) were used as the response variables in the quadratic polynomial model. Most of the selected models in the analysis of variance (ANOVA) have shown significant results. A high connection between the parameters and dependent variables was surprisingly discovered in this study which the obtained value of R2 for removal percentage of COD, BOD and SS were 0.9975, 0.9984 and 0.9979 respectively. Optimal removal was achieved at 19.07 A of current intensity (equivalent to 542 mA/cm2 of current density), 44.97 min of treatment time, 8.60 mm of inter-electrode distance and 4.37 of pH value, resulted in 97.21%, 99.26% and 99.00% of COD, BOD and SS removal respectively. This optimized scheme of operating parameters combination offers an alternate choice for enhancing the treatment efficiency of POME and also can be a benchmark for other researchers to treat highly polluted wastewater
Synthesis of flower-like molybdenum sulfide/graphene hybrid as an efficient oxygen reduction electrocatalyst for anion exchange membrane fuel cells
Nanostructured transition metal chalcogenides (TMCs) have significant interest towards electrochemical
devices such as fuel cells, metal-ion batteries, due to their unique physical and electrochemical properties.
Herein, we report a facile hydrothermal synthesis of flower-like nanostructured molybdenum
sulphide and its incorporation on to graphene as a potential oxygen reduction reaction catalyst in
alkaline medium. The phase purity and morphological evolution of MoS2 is systematically studied
through X-ray diffraction and scanning electron microscopic techniques. The electronic states of metal
and non-metallic species are deeply studied by X-ray photoelectron spectroscopy. The effect of annealing
temperatures and TMC concentrations are also investigated by electrochemical techniques such as cyclic
and linear sweep voltammograms. The optimised electrocatalyst (MoS2/G-500) delivers significant ORR
activity with onset and half-wave potentials of 0.91 and 0.80 V (vs. RHE), respectively. Superior durability
compared to state-of-art Pt/C catalyst is ascertained by repeating potential cycles for about 5000 times
and also by chronoamperometric technique. Finally, the hybrid catalyst is evaluated in AEMFC as cathode
catalyst which delivers peak power density of about 29 mW cm�2 under ambient temperature and
pressure. The present findings emphasis that MoS2/G catalyst is promising as cost-effective and alternative
to noble metal-based catalysts for fuel cell applications
3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-phenylene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells
Hydroxyl ion (OH–) conducting anion exchange membranes based on modified poly (phenylene
oxide) are fabricated for their application in alkaline polymer electrolyte fuel cells (APEFCs). In the present
study, chloromethylation of poly(phenylene oxide) (PPO) is performed by aryl substitution rather than benzyl
substitution and homogeneously quaternized to form an anion exchange membrane (AEM). 1H NMR and FT–
IR studies reveal successful incorporation of the above groups in the polymer backbone. The membrane is
characterized for its ion exchange capacity and water uptake. The membrane formed by these processes show
good ionic conductivity and when used in fuel cell exhibited an enhanced performance in comparison with the
state-of-the-art commercial AHA membrane. A peak power density of 111 mW/cm2 at a load current density
of 250 mA/cm2 is obtained for PPO based membrane in APEFCs at 30 °C
Nitrogen functionalized graphite nanofibers/Ir nanoparticles for enhanced oxygen reduction reaction in polymer electrolyte fuel cells (PEFCs)
Nitrogen functionalization of graphite nanofibers (N-GNF) was performed using hexa methyl tetra amine (HMTA) as the nitrogen source and used as a support material for metal nanoparticle deposition. The successful incorporation of nitrogen was confirmed using X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy analysis. Iridium (Ir) nanoparticles with a particle size of ∼2.2 nm were deposited onto N-GNF by a simple ethanol reduction method. The oxygen reduction reaction (ORR) activity of N-GNF and the ameliorating effect of ORR on Ir deposited N-GNF (Ir/N-GNF) were studied by various physicochemical and electrochemical methods. The enhancement of ORR activity for Ir/N-GNF was evidenced by high onset potentials and mass activities. The presence of nitrogen in the Ir/N-GNF catalyst facilitates quick desorption of the -OH species from the Ir surface and accelerates the electrochemical reaction of Ir particles which in turn enhances the ORR activity. The electrochemical stability of the Ir/N-GNF was investigated by repeated potential cycling up to 2500 cycles and was found to have excellent stability for ORR activity. The PEFC with Ir/N-GNF catalyst delivers a peak power density of 450 mW cm-2 at a load current density of 1577 mA cm-2, while the PEFC with Ir/GNF catalyst delivers a peak power density of only 259 mW cm-2 at a load current density of 1040 mA cm-2 under identical operation conditions. © 2014 The Royal Society of Chemistry.FALS
Catalytic activity of Pt anchored onto graphite nanofiber-poly(3,4-ethylenedioxythiophene) composite toward oxygen reductionreaction in polymer electrolyte fuel cells
The potential of graphite nanofiber (GNF)–Poly(3,4-ethylenedioxythiophene) (PEDOT) composite isexplored as a catalyst support for polymer electrolyte fuel cells (PEFCs). Due to electron accepting natureof GNF and electron donating nature of PEDOT, the monomer EDOT adsorbs on the surface of GNF dueto strong electrostatic �–� interaction. Pt nanoparticles are impregnated on GNF–PEDOT composite byethylene glycol reduction method and their effects on electro catalytic activity for oxygen reductionreaction (ORR) are systemically studied. Pt particles supported on GNF–PEDOT with catalyst loading of0.2 mg cm−2exhibit a peak power density of 537 mW cm−2at a load current density of 1120 mA cm−2,while it was only 338 mW cm−2at a load current density of 720 mA cm−2in case of Pt particles supportedon pristine GNF. The superior behavior of GNF–PEDOT supported Pt catalyst could be exclusively cred-ited to the high graphitic nature of GNF and their mild functionalization with PEDOT increasing uniformdispersion of Pt. Indeed, the non-destructive functionalization of GNF with conducting polymer, such asPEDOT, makes them promising catalyst-supports for PEFCs
Insights into the effect of structure-directing agents on structural properties of mesoporous carbon for polymer electrolyte fuel cells
Simultaneous Co-Doping of Nitrogen and Fluorine into MWCNTs: An In-Situ Conversion to Graphene Like Sheets and Its Electro-Catalytic Activity toward Oxygen Reduction Reaction
In the process of developing non-metallic electro-catalyst for oxygen reduction reaction (ORR), simultaneous co-doping of N and F into Multiwalled carbon nanotubes (MWCNTs) are synthesized and their structural and electrochemical properties are investigated. Microscopic analysis confirms that N-F/MWCNTs undergo structural transformation to wrinkled graphene like structures with many open-edge active sites favorable for ORR. The enhanced catalytic activity with dominant 4 electron transfer process during ORR is evidenced for the N-F/MWCNT catalysts. N-F/MWCNT catalyst has no effect on CH3OH or CO, which makes it highly desirable as metal-free ORR catalyst for polymer electrolyte fuel cell (PEFC) applications. The developed catalyst is subjected to 10,000 repeated potential cycles in acidic media and found absolutely no degradation in their ORR activity. XPS analysis of N-F/MWCNT exhibited the presence of active graphitic-N, pyridinic-N species and active semi-ionic C-F bonds. The co-existence of all these species induces the maximum polarization of C-C bonds in the graphitic matrix and synergistically enhances the ORR
Application of Low-Cost Plant-Derived Carbon Dots as a Sustainable Anode Catalyst in Microbial Fuel Cells for Improved Wastewater Treatment and Power Output
Microbial fuel cells (MFC) can generate electric energy from wastewater which can be enhanced further by anode catalysts. The recovery of electrons produced by oxidation of organics catalyzed by bacteria in the anode was enhanced when carbon dots(CDs) were added into the MFC. In this present study, a novel strategy for designing anode material and the fabrication of a high-efficient and environmentally friendly anode for energy generation from wastewater was reported. The CDs were synthesized by the pyrolysis of a peanut shell at the temperature of 250 °C for 2 h with a heating rate of 10 °C min−1. Thus synthesized CDs were characterized by transmission electron microscopy (TEM), UV/Vis spectroscopy, and fluorescence spectroscopy. The TEM analysis showed morphology with an average size of 1.62 nm. The UV/Vis absorbance of the CDs shows a wide absorption band without a characteristic peak. The excitation spectrum of CDs recorded at the emission wavelength of 440 nm exhibits a peak around 320 nm. CDs were investigated as an anode material in a MFC utilizing acetate as the organic substrate. The average chemical oxygen demand (COD) removal in closed circuit operation mode was 89%. The maximum power density production (7.2 W/m3) was observed in MFC containing 1 mg/cm2 CD-impregnated anode (CDsIA). The CDsIA provides the ability to promote efficient biofilm formation. These results emphasize the application of CD-based electrodes in MFCs for the simultaneous treatment of wastewater and electricity generation while also providing additional benefits
Application of Low-Cost Plant-Derived Carbon Dots as a Sustainable Anode Catalyst in Microbial Fuel Cells for Improved Wastewater Treatment and Power Output
Microbial fuel cells (MFC) can generate electric energy from wastewater which can be enhanced further by anode catalysts. The recovery of electrons produced by oxidation of organics catalyzed by bacteria in the anode was enhanced when carbon dots(CDs) were added into the MFC. In this present study, a novel strategy for designing anode material and the fabrication of a high-efficient and environmentally friendly anode for energy generation from wastewater was reported. The CDs were synthesized by the pyrolysis of a peanut shell at the temperature of 250 °C for 2 h with a heating rate of 10 °C min−1. Thus synthesized CDs were characterized by transmission electron microscopy (TEM), UV/Vis spectroscopy, and fluorescence spectroscopy. The TEM analysis showed morphology with an average size of 1.62 nm. The UV/Vis absorbance of the CDs shows a wide absorption band without a characteristic peak. The excitation spectrum of CDs recorded at the emission wavelength of 440 nm exhibits a peak around 320 nm. CDs were investigated as an anode material in a MFC utilizing acetate as the organic substrate. The average chemical oxygen demand (COD) removal in closed circuit operation mode was 89%. The maximum power density production (7.2 W/m3) was observed in MFC containing 1 mg/cm2 CD-impregnated anode (CDsIA). The CDsIA provides the ability to promote efficient biofilm formation. These results emphasize the application of CD-based electrodes in MFCs for the simultaneous treatment of wastewater and electricity generation while also providing additional benefits
Catalytic activity of Pt anchored onto graphite nanofiber-poly (3,4-ethylenedioxythiophene) composite toward oxygen reduction reaction in polymer electrolyte fuel cells
The potential of graphite nanofiber (GNF)-Poly(3,4-ethylenedioxythiophene) (PEDOT) composite is explored as a catalyst support for polymer electrolyte fuel cells (PEFCs). Due to electron accepting nature of GNF and electron donating nature of PEDOT, the monomer EDOT adsorbs on the surface of GNF due to strong electrostatic π-π interaction. Pt nanoparticles are impregnated on GNF-PEDOT composite by ethylene glycol reduction method and their effects on electro catalytic activity for oxygen reduction reaction (ORR) are systemically studied. Pt particles supported on GNF-PEDOT with catalyst loading of 0.2 mg cm-2 exhibit a peak power density of 537 mW cm-2 at a load current density of 1120mAcm-2, while it was only 338 mW cm -2 at a load current density of 720 mA cm-2 in case of Pt particles supported on pristine GNF. The superior behavior of GNF-PEDOT supported Pt catalyst could be exclusively credited to the high graphitic nature of GNF and their mild functionalization with PEDOT increasing uniform dispersion of Pt. Indeed, the non-destructive functionalization of GNF with conducting polymer, such as PEDOT, makes them promising catalyst-supports for PEFCs. Crown Copyright © 2013 Published by Elsevier Ltd. All rights reserved.