Mobility of Dislocations in Aluminum

The velocities of individual dislocations of edge and mixed types in pure aluminum single crystals were determined as a function of applied‐resolved shear stress and temperature. The dislocation velocities were determined from measurements of the displacements of individual dislocations produced by stress pulses of known duration. The Berg‐Barrett x‐ray technique was employed to observe the dislocations, and stress pulses of 15 to 108 μsec duration were applied by propagating torsional waves along the axes of [111]‐oriented cylindrical crystals. Resolved shear stresses up to 16×10^6 dynes∕cm^2 were applied at temperatures ranging from −150° to +70°C, and dislocation velocities were found to vary from 10 to 2800 cm∕sec over these ranges of stress and temperature. The experimental conditions were such that the dislocation velocities were not significantly influenced by impurities, dislocation curvature, dislocation‐dislocation interactions, or long‐range internal stress fields in the crystals. The velocity of dislocations is found to be linearly proportional to the applied‐resolved shear stress, and to decrease with increasing temperature. Qualitative comparison of these results with existing theories leads to the conclusion that the mobility of individual dislocations in pure aluminum is governed by dislocation‐phonon interactions. The phonon‐viscosity theory of dislocation mobility can be brought into agreement with the experimental results by reasonable choices of the values of certain constants appearing in the theory

The design and implementation of the Technical Facilities Controller (TFC) for the Goldstone deep space communications complex

The Technical Facilities Controller is a microprocessor-based energy management system that is to be implemented in the Deep Space Network facilities. This system is used in conjunction with facilities equipment at each of the complexes in the operation and maintenance of air-conditioning equipment, power generation equipment, power distribution equipment, and other primary facilities equipment. The implementation of the Technical Facilities Controller was completed at the Goldstone Deep Space Communications Complex and is now operational. The installation completed at the Goldstone Complex is described and the utilization of the Technical Facilities Controller is evaluated. The findings will be used in the decision to implement a similar system at the overseas complexes at Canberra, Australia, and Madrid, Spain

Detection of bearing failure in mechanical devices using neural networks

We present a novel time-domain method for the detection of faulty bearings that has direct applicability to monitoring the health of the turbo pumps on the Space Shuttle Main Engine. A feed-forward neural network was trained to detect modelled roller bearing faults on the basis of the periodicity of impact pulse trains. The network's performance was dependent upon the number of pulses in the network's input window and the signal-to-noise ratio of the input signal. To test the model's validity, we fit the model's parameters to an actual vibration signal generated by a faulty roller element bearing and applied the network trained on this model to detect faults in actual vibration data. When this network was tested on the actual vibration data, it correctly identified the vibration signal as a fault condition 76 percent of the time

Near-field optical spectroscopy and microscopy of self-assembled GaN∕AlN nanostructures

The spatial distribution and emission properties of small clusters of GaNquantum dots in an AlN matrix are studied using high-resolution electron and optical microscopy. High-resolution transmission electron microscopy reveals near vertical correlation among the GaNdots due to a sufficiently thin AlN spacer layer thickness, which allows strain induced stacking. Scanning electron and atomic force microscopy show lateral coupling due to a surface roughness of ∼50–60nm. Near-field photoluminescence in the illumination mode (both spatially and spectrally resolved) at 10K revealed emission from individual dots, which exhibits size distribution of GaNdots from localized sites in the stacked nanostructure. Strong spatial localization of the excitons is observed in GaNquantum dots formed at the tip of self-assembled hexagonal pyramid shapes with six [101¯1¯] facets

Scenarios of domain pattern formation in a reaction-diffusion system

We performed an extensive numerical study of a two-dimensional reaction-diffusion system of the activator-inhibitor type in which domain patterns can form. We showed that both multidomain and labyrinthine patterns may form spontaneously as a result of Turing instability. In the stable homogeneous system with the fast inhibitor one can excite both localized and extended patterns by applying a localized stimulus. Depending on the parameters and the excitation level of the system stripes, spots, wriggled stripes, or labyrinthine patterns form. The labyrinthine patterns may be both connected and disconnected. In the the stable homogeneous system with the slow inhibitor one can excite self-replicating spots, breathing patterns, autowaves and turbulence. The parameter regions in which different types of patterns are realized are explained on the basis of the asymptotic theory of instabilities for patterns with sharp interfaces developed by us in Phys. Rev. E. 53, 3101 (1996). The dynamics of the patterns observed in our simulations is very similar to that of the patterns forming in the ferrocyanide-iodate-sulfite reaction.Comment: 15 pages (REVTeX), 15 figures (postscript and gif), submitted to Phys. Rev.

Fingering Instability in Combustion

A thin solid (e.g., paper), burning against an oxidizing wind, develops a fingering instability with two decoupled length scales. The spacing between fingers is determined by the P\'eclet number (ratio between advection and diffusion). The finger width is determined by the degree two dimensionality. Dense fingers develop by recurrent tip splitting. The effect is observed when vertical mass transport (due to gravity) is suppressed. The experimental results quantitatively verify a model based on diffusion limited transport

Virus-like particles identify an HIV V1V2 Apex-1 binding neutralizing antibody that lacks a protruding loop

Most HIV-1-specific neutralizing antibodies isolated to date exhibit unusual characteristics that complicate their elicitation. Neutralizing antibodies that target the V1V2 apex of the HIV-1 envelope (Env) trimer feature unusually long protruding loops, enabl them to penetrate the HIV-1 glycan shield. As antibodies with loops of requisite length are created through uncommon recombination events, an alternative mode of apex binding has been sought. Here, we isolated a lineage of Env apex-directed neutralizing antibodies, N90-VRC38.01-11, using virus-like particles and conformationally stabilized Env trimers as B cell probes. A crystal structure of N90-VRC38.01 with a scaffolded V1V2 revealed a binding mode involving side-chain to side-chain interactions that reduced the distance the antibody loop must traverse the glycan shield, facilitating V1V2 binding via a non-protruding loop. The N90-VRC38 lineage identifies a solution for V1V2apex binding that provides a more conventional B cell pathway for vaccine design