99 research outputs found
TREATMENT OF EARLY PERIPROSTHETIC INFECTION AT HIP REPLACEMENT
We carried out the analysis of results of treatment of patients with early periprosthetic infection after total hip replacement with use of tactics aimed at the preservation of an implant and function of the operated joint, based on a multi-stage surgical rehabilitation, clinical and. laboratory monitoring of the wound healing process. The efficiency of chosen tactics in 83 % of cases was shown. Based on these results an algorithm for treatment of early periprosthetic infection at the hip replacement that can be recommended for widespread use in clinical practice was offered
Reconstruction of Acetabular and Femoral Bone Defects With Impaction Bone Grafting in Revision Hip Arthroplasty: A Case Report
Background. For many years, the main reasons for revision surgeries after hip arthroplasty remain aseptic loosening and osteolysis, which lead to formation of bone defects of various size and localization. Given the relatively young age of patients undergoing revision, the methods of biological restoration of the bone tissue, such as impaction bone grafting (IBG), are of particular interest.
Aim of the report to demonstrate the delayed outcome of impaction bone grafting using compacted morselized bone allograft.
Case presentation. Complicated clinical case of a 62-year-old patient with Paprosky type IIA bone deficiency in the acetabulum and Paprosky type II bone deficiency in the proximal femur with aseptic loosening of the acetabular and femoral components of the hip prosthesis is presented. During revision arthroplasty with cemented components, IBG of the acetabulum and femur was performed with a reconstructive mesh augmentation of the acetabulum using Stryker X-Change technology. Bone allograft prepared with the use of heat disinfection method served as an osteoplastic material. Follow-up period was 4 years. Control X-rays demonstrate restoration of the center of rotation of the hip, presence of bone masses in the areas of pelvic and femoral bone defects, absence of osteoplastic material resorption and migration of implants during the follow-up period. Clinical assessment shows an improvement of the Harris Hip Score from 34 to 85 points.
Conclusion. Obtained results showed the efficacy of impaction bone grafting with the bone allograft prepared with the use of heat disinfection method in the mid-term period
The problems associated with the monitoring of complex workplace radiation fields at European high-energy accelerators and thermonuclear fusion facilities
The European Commission is funding within its Sixth Framework Programme a three-year project (2005-2007) called CONRAD, COordinated Network for RAdiation Dosimetry. The organisational framework for this project is provided by the European Radiation Dosimetry Group EURADOS. One task within the CONRAD project, Work Package 6 (WP6), was to provide a report outlining research needs and research activities within Europe to develop new and improved methods and techniques for the characterisation of complex radiation fields at workplaces around high-energy accelerators, but also at the next generation of thermonuclear fusion facilities. The paper provides an overview of the report, which will be available as CERN Yellow Repor
Evidence for a Two-stage Melting Transition of the Vortex Matter in Bi2Sr2Ca1Cu2O8+d Single Crystals obtained by Muon Spin Rotation
From muon spin rotation measurements on under- to overdoped Bi-2212 crystals
we obtain evidence for a two-stage transition of the vortex matter as a
function of temperature. The first transition is well known and related to the
irreversibility line (IL). The second one is located below the IL and has not
been previously observed. It occurs for all three sets of crystals and is
unrelated to the vortex mobility. Our data are consistent with a two-stage
melting scenario where the intra-planar melting of the vortex lattice and the
inter-planar decoupling of the vortex lines occur independently.Comment: 9 pages and 3 figure
Anomalous peak in the superconducting condensate density of cuprate high T_{c} superconductors at a unique critical doping state
The doping dependence of the superconducting condensate density, n_{s}^{o},
has been studied by muon-spin-rotation for
Y_{0.8}Ca_{0.2}Ba_{2}(Cu_{1-z}Zn_{z})_{3}O_{7-\delta} and
Tl_{0.5-y}Pb_{0.5+y}Sr_{2}Ca_{1-x}Y_{x}Cu_{2}O_{7}. We find that n_{s}^{o}
exhibits a pronounced peak at a unique doping state in the slightly overdoped
regime. Its position coincides with the critical doping state where the normal
state pseudogap first appears depleting the electronic density of states. A
surprising correlation between n_{s}^{o} and the condensation energy U_{o} is
observed which suggests unconventional behavior even in the overdoped region.Comment: 10 pages, 3 figure
Proteasomes generate spliced epitopes by two different mechanisms and as efficiently as non-spliced epitopes
Proteasome-catalyzed peptide splicing represents an additional catalytic
activity of proteasomes contributing to the pool of MHC-class I-presented
epitopes. We here biochemically and functionally characterized a new melanoma
gp100 derived spliced epitope. We demonstrate that the gp100mel47–52/40–42
antigenic peptide is generated in vitro and in cellulo by a not yet described
proteasomal condensation reaction. gp100mel47–52/40–42 generation is enhanced
in the presence of the β5i/LMP7 proteasome-subunit and elicits a peptide-
specific CD8+ T cell response. Importantly, we demonstrate that different
gp100mel-derived spliced epitopes are generated and presented to CD8+ T cells
with efficacies comparable to non-spliced canonical tumor epitopes and that
gp100mel-derived spliced epitopes trigger activation of CD8+ T cells found in
peripheral blood of half of the melanoma patients tested. Our data suggest
that both transpeptidation and condensation reactions contribute to the
frequent generation of spliced epitopes also in vivo and that their immune
relevance may be comparable to non-spliced epitopes
The anomaly of the oxygen bond-bending mode at 320 cm and the additional absorption peak in the c-axis infrared conductivity of underdoped YBaCuO single crystals revisited by ellipsometricmeasurements
We have performed ellipsometric measurements of the far-infrared c-axis
dielectric response of underdoped YBaCuO single
crystals. Here we report a detailed analysis of the temperature-dependent
renormalization of the oxygen bending phonon mode at 320 cm and the
formation of the additional absorption peak around 400-500 cm. For a
strongly underdoped YBaCuO crystal with T=52 K we
find that, in agreement with previous reports based on conventional reflection
measurements, the gradual onset of both features occurs well above T at
T*150 K. Contrary to some of these reports, however, our data establish
that the phonon anomaly and the formation of the additional peak exhibit very
pronounced and steep changes right at T. For a less underdoped
YBaCuO crystal with T=80 K, the onset temperature of
the phonon anomaly almost coincides with T. Also in contrast to some
previous reports, we find for both crystals that a sizeable fraction of the
spectral weight of the additional absorption peak cannot be accounted for by
the spectral-weight loss of the phonon modes but instead arises from a
redistribution of the electronic continuum. Our ellipsometric data are
consistent with a model where the bilayer cuprate compounds are treated as a
superlattice of intra- and inter-bilayer Josephson-junctions
Correlation between the Josephson coupling energy and the condensation energy in bilayer cuprate superconductors
We review some previous studies concerning the intra-bilayer Josephson
plasmons and present new ellipsometric data of the c-axis infrared response of
almost optimally doped Bi_{2}Sr_{2}CaCu_{2}O_{8}. The c-axis conductivity of
this compound exhibits the same kind of anomalies as that of underdoped
YBa_{2}Cu_{3}O_{7-delta}. We analyze these anomalies in detail and show that
they can be explained within a model involving the intra-bilayer Josephson
effect and variations of the electric field inside the unit cell. The Josephson
coupling energies of different bilayer compounds obtained from the optical data
are compared with the condensation energies and it is shown that there is a
reasonable agreement between the values of the two quantities. We argue that
the Josephson coupling energy, as determined by the frequency of the
intra-bilayer Josephson plasmon, represents a reasonable estimate of the change
of the effective c-axis kinetic energy upon entering the superconducting state.
It is further explained that this is not the case for the estimate based on the
use of the simplest ``tight-binding'' sum rule. We discuss possible
interpretations of the remarkable agreement between the Josephson coupling
energies and the condensation energies. The most plausible interpretation is
that the interlayer tunneling of the Cooper pairs provides the dominant
contribution to the condensation energy of the bilayer compounds; in other
words that the condensation energy of these compounds can be accounted for by
the interlayer tunneling theory. We suggest an extension of this theory, which
may also explain the high values of T_{c} in the single layer compounds
Tl_{2}Ba_{2}CuO_{6} and HgBa_{2}CuO_{4}, and we make several experimentally
verifiable predictions.Comment: 16 pages (including Tables) and 7 figures; accepted for publication
in Physical Review
The James Webb Space Telescope Mission: Optical Telescope Element Design, Development, and Performance
The James Webb Space Telescope (JWST) is a large, infrared space telescope
that has recently started its science program which will enable breakthroughs
in astrophysics and planetary science. Notably, JWST will provide the very
first observations of the earliest luminous objects in the Universe and start a
new era of exoplanet atmospheric characterization. This transformative science
is enabled by a 6.6 m telescope that is passively cooled with a 5-layer
sunshield. The primary mirror is comprised of 18 controllable, low areal
density hexagonal segments, that were aligned and phased relative to each other
in orbit using innovative image-based wavefront sensing and control algorithms.
This revolutionary telescope took more than two decades to develop with a
widely distributed team across engineering disciplines. We present an overview
of the telescope requirements, architecture, development, superb on-orbit
performance, and lessons learned. JWST successfully demonstrates a segmented
aperture space telescope and establishes a path to building even larger space
telescopes.Comment: accepted by PASP for JWST Overview Special Issue; 34 pages, 25
figure
- …