Shear Stiffness of Pallet Rack Upright Frames

PaIIet racks, often fabricated using cold-formed steel, are used for the storage of goods. Uprights of these racks are braced in the cross-aisle direction forming a frame, which behaves like a built-up column. Evaluation of the shear stiffness of this frame is needed to determine the buckling load. Currently two approaches prevail in the rack industry to determine the shear stiffness. The RMI code uses a theoretical formula and the FEM code requires testing. There is a considerable difference in the stiffness values determined by two approaches. The present paper describes experimental and numerical studies conducted at Oxford Brookes University to evaluate shear stiffness in an ongoing research project

Cross-aisle Stiffness Tests on Rack Upright Frames

The US Rack Manufacturers Institution (RMI) code uses a theoretical formula derived by Timoshenko and the new Eurocode EN15512 requires testing. There is a considerable difference in the stiffn ess values determined by two approaches. This paper describes the experiments conducted on 80 full sized upright frames at Oxford Brookes University varying upright size, number of panels in the frame, aspect ratio of the panel (panel length/depth), restraints at the intermediate nodes of the frame, loading pattern, lacing pattern (channels back to back or front to front) and bolt tightness. The experimental data reported can be used in proposing revised design procedures

Status and phenology of breeding seabirds and a review of Important Bird and Biodiversity Areas in the British Indian Ocean Territory

This is the final version. Available on open access from Cambridge University Press via the DOI in this recordSeabirds are one of the most threatened avian taxa and are hence a high conservation priority. Managing seabirds is challenging, requiring conservation actions at sea (e.g. Marine Protected Areas - MPAs) and on land (e.g. protection of breeding sites). Important Bird and Biodiversity Areas (IBAs) have been successfully used to identify sites of global importance for the conservation of bird populations, including breeding seabirds. The challenge of identifying suitable IBAs for tropical seabirds is exacerbated by high levels of dispersal, aseasonal and asynchronous breeding. The western Indian Ocean supports ~19 million breeding seabirds of 30 species, making it one of the most significant tropical seabird assemblages in the world. Within this is the British Indian Ocean Territory (BIOT), encompassing 55 islands of the Chagos Archipelago, which supports 18 species of breeding seabird and one of the world’s largest no-take MPAs. Between January and March in 1975 and 1996, eight and 45 islands respectively were surveyed for seabirds and the data used to designate 10 islands as IBAs. A further two were proposed following an expedition to 26 islands in February/March 2006. Due to the historic and restricted temporal and spatial nature of these surveys, the current IBA recommendations may not accurately represent the archipelago’s present seabird status and distribution. To update estimates of the BIOT breeding seabird assemblage and reassess the current IBA recommendations, we used seabird census data collected in every month except September from every island, gathered during 2008–2018. The maximum number of breeding seabirds for a nominal year was 281,596 pairs of 18 species, with three species making up 96%: Sooty Tern Onychoprion fuscatus - 70%, Lesser Noddy Anous tenuirostris - 18% and Red-footed Booby Sula sula - 8%. Phenology was a complex species-specific mix of synchronous and asynchronous breeding, as well as seasonal and aseasonal breeding. Nine of the 10 designated IBAs and the two proposed IBAs qualified for IBA status based on breeding seabirds. However, not every IBA qualified each year because Sooty Terns periodically abandoned breeding islands and Tropical Shearwater Puffinus bailloni breeding numbers dropped below IBA qualifying criteria in some years. Further, one survey per year does not always capture the periodic breeding of some tropical seabirds. We propose therefore, that IBAs in BIOT are better designated at the island cluster level rather than by specific island and require two surveys six months apart per year. This work highlights the merits of long-term, systematic, versus incidental surveys for breeding tropical seabirds and the subsequent associated designation of IBAs.Bertarelli Foundatio

Plastic and marine turtles: a review and call for research

Plastic debris is now ubiquitous in the marine environment affecting a wide range of taxa, from microscopic zooplankton to large vertebrates. Its persistence and dispersal throughout marine ecosystems has meant that sensitivity toward the scale of threat is growing, particularly for species of conservation concern, such as marine turtles. Their use of a variety of habitats, migratory behaviour, and complex life histories leave them subject to a host of anthropogenic stressors, including exposure to marine plastic pollution. Here, we review the evidence for the effects of plastic debris on turtles and their habitats, highlight knowledge gaps, and make recommendations for future research. We found that, of the seven species, all are known to ingest or become entangled in marine debris. Ingestion can cause intestinal blockage and internal injury, dietary dilution, malnutrition, and increased buoyancy which in turn can result in poor health, reduced growth rates and reproductive output, or death. Entanglement in plastic debris (including ghost fishing gear) is known to cause lacerations, increased drag—which reduces the ability to forage effectively or escape threats—and may lead to drowning or death by starvation. In addition, plastic pollution may impact key turtle habitats. In particular, its presence on nesting beaches may alter nest properties by affecting temperature and sediment permeability. This could influence hatchling sex ratios and reproductive success, resulting in population level implications. Additionally, beach litter may entangle nesting females or emerging hatchlings. Lastly, as an omnipresent and widespread pollutant, plastic debris may cause wider ecosystem effects which result in loss of productivity and implications for trophic interactions. By compiling and presenting this evidence, we demonstrate that urgent action is required to better understand this issue and its effects on marine turtles, so that appropriate and effective mitigation policies can be developed

Investigating the distribution and regional occurrence of anthropogenic litter in English Marine Protected Areas using 25 years of citizen-science beach clean data

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordMarine Protected Areas (MPAs) are designated to enable the management of damaging activities within a discrete spatial area, and can be effective at reducing the associated impacts, including habitat loss and over-exploitation. Such sites, however, may be exposed to the potential impacts from broader scale pressures, such as anthropogenic litter, due to its diffuse nature and lack of constraint by legislative and/or political boundaries. Plastic, a large component of litter, is of particular concern, due to increasing evidence of its potential to cause ecological and socio-economic damage. The presence of sensitive marine features may mean that some MPAs are at greater potential risk from the impacts of plastic pollution than some non-protected sites. Understanding the abundance, distribution and composition of litter along coastlines is important for designing and implementing effective management strategies. Gathering such data, however, can be expensive and time37 consuming but litter survey programmes that enlist citizen scientists are often able to resolve many of the logistical or financial constraints. Here, we examine data collected over 25-years (1994 – 2018), by Marine Conservation Society volunteers, for spatial patterns in relation to the English MPA network, with the aim of highlighting key sources of litter and identifying management priority areas. We found that MPAs in southeast (Kent) and southwest (Cornwall and Devon) England have the highest densities of shore-based litter. Plastic is the main material constituent and public littering the most common identifiable source. Items attributed to fishing activities were most prevalent in southwest MPAs and sewage related debris was highest in MPAs near large rivers and estuaries, indicating localised accumulation. When comparing inside and outside of MPAs, we found no difference in litter density, demonstrating the need for wider policy intervention at local, national and international scales to reduce the amount of plastic pollution.Natural EnglandNatural Environment Research Council (NERC)Engineering and Physical Sciences Research Council (EPSRC

Forward Neutron Production at the Fermilab Main Injector

We have measured cross sections for forward neutron production from a variety of targets using proton beams from the Fermilab Main Injector. Measurements were performed for proton beam momenta of 58 GeV/c, 84 GeV/c, and 120 GeV/c. The cross section dependence on the atomic weight (A) of the targets was found to vary as $A^(alpha)$ where $\alpha$ is $0.46\pm0.06$ for a beam momentum of 58 GeV/c and 0.54$\pm$0.05 for 120 GeV/c. The cross sections show reasonable agreement with FLUKA and DPMJET Monte Carlos. Comparisons have also been made with the LAQGSM Monte Carlo.Comment: Accepted for publication in Physical Review D. This version incorporates small changes suggested by referee and small corrections in the neutron production cross sections predicted by FLUK

Measurement of Charged Pion Production Yields off the NuMI Target

The fixed-target MIPP experiment, Fermilab E907, was designed to measure the production of hadrons from the collisions of hadrons of momenta ranging from 5 to 120 GeV/c on a variety of nuclei. These data will generally improve the simulation of particle detectors and predictions of particle beam fluxes at accelerators. The spectrometer momentum resolution is between 3 and 4%, and particle identification is performed for particles ranging between 0.3 and 80 GeV/c using $dE/dx$, time-of-flight and Cherenkov radiation measurements. MIPP collected $1.42 \times10^6$ events of 120 GeV Main Injector protons striking a target used in the NuMI facility at Fermilab. The data have been analyzed and we present here charged pion yields per proton-on-target determined in bins of longitudinal and transverse momentum between 0.5 and 80 GeV/c, with combined statistical and systematic relative uncertainties between 5 and 10%.Comment: 15 pages, 13 figure

Microplastics in the Arctic: a transect through the Barents Sea

Globally, the abundance of microplastics in our oceans is increasing, including within the remote locations of the polar regions. The Barents Sea, which adjoins the Arctic Ocean, is an area of high primary productivity that, owing to the convergence of regional currents, has been mooted as a potential sixth ocean gyre that may coalesce high concentrations of plastic debris. This study aimed to explore data collected from large volume samples of sub-surface water collected from transects through the Barents Sea to quantify and characterise microplastics in this region, with a focus on potential impacts to zooplankton. Overall, the mean microplastic abundance in the Barents Sea was 0.011 microplastics m-3 (range: 0.007 – 0.015 m-3). Microplastics were found in higher abundances nearer land mass at the southern end of the transect and northwards towards the ice edge, recording 0.015 microplastics m-3 during both transect legs. Microplastics were predominantly fibrous (92.1%) and typically blue (79%) or red (17%) in colour. A range of polymers were identified including polyester (3.8%), copolymer blends (2.7%), elastomers (7.1%) and acrylics (10.6%), however semi-synthetic polymers dominated, comprising 74.4% of particles found. Higher microplastic concentrations in the northernmost transect may stem from melting sea-ice, while the higher concentrations in the southernmost transect likely derive from the long-range transport of microplastics via currents from Europe

Microplastic ingestion ubiquitous in marine turtles

Despite concerns regarding the environmental impacts of microplastics, knowledge of the incidence and levels of synthetic particles in large marine vertebrates is lacking. Here, we utilize an optimized enzymatic digestion methodology, previously developed for zooplankton, to explore whether synthetic particles could be isolated from marine turtle ingesta. We report the presence of synthetic particles in every turtle subjected to investigation (n = 102) which included individuals from all seven species of marine turtle, sampled from three ocean basins (Atlantic [ATL]: n = 30, four species; Mediterranean (MED): n = 56, two species; Pacific (PAC): n = 16, five species). Most particles (n = 811) were fibres (ATL: 77.1% MED: 85.3% PAC: 64.8%) with blue and black being the dominant colours. In lesser quantities were fragments (ATL: 22.9%: MED: 14.7% PAC: 20.2%) and microbeads (4.8%; PAC only; to our knowledge the first isolation of microbeads from marine megavertebrates). Fourier transform infrared spectroscopy (FT‐IR) of a subsample of particles (n = 169) showed a range of synthetic materials such as elastomers (MED: 61.2%; PAC: 3.4%), thermoplastics (ATL: 36.8%: MED: 20.7% PAC: 27.7%) and synthetic regenerated cellulosic fibres (SRCF; ATL: 63.2%: MED: 5.8% PAC: 68.9%). Synthetic particles being isolated from species occupying different trophic levels suggest the possibility of multiple ingestion pathways. These include exposure from polluted seawater and sediments and/or additional trophic transfer from contaminated prey/forage items. We assess the likelihood that microplastic ingestion presents a significant conservation problem at current levels compared to other anthropogenic threats