372 research outputs found

    Resistance of <i>Rhodococcus ruber</i> biofilms to CuO nanoparticles depending on exopolymer matrix composition

    Get PDF
    Background. The widespread use of copper oxide nanoparticles (CuO NPs) increases their release into the environment, which leads to accumulation in trophic chains. Bacterial biofilms are more resistant to physico-chemical factors compared to planktonic cells due to an exopolymer matrix (EPM) consisting of polysaccharides, proteins, lipids and nucleic acids. Rhodococcus actinobacteria are promising for environmental biotechnology due to biodegradation of petroleum products, pesticides and other organic pollutants, as well as bioaccumulation of heavy metals.   The aim. To investigate effects of CuO NPs on the viability of Rhodococcus ruber IEGM 231 cells in biofilms and the dynamics of EPM components.   Methods. R. ruber biofilms were grown on microscopy cover glass with CuO NPs and EPM components were studied using confocal laser scanning microscopy (CLSM) by differentiating staining with LIVE/DEAD to determine the number of living and dead cells, Nile Red for lipids, FITC for proteins and Calcofluor White for betapolysaccharides.   Results. It was found that R. ruber biofilms grown in a mineral medium with1.0 vol.% n-hexadecane are more resistant to CuO NPs compared to biofilms growing in a rich culture medium (meat-peptone broth). This was due to more intensive EPM formation, which plays a major role in protecting cells from the bactericidal action of nanometals. A weak stimulating effect of a low (0.001 g/l) concentration of CuO NPs on biofilm formation was registered. Dynamics and localization of main EPM components were monitored during prolonged (24–72 h) biofilm cultivation with CuO NPs. When exposed to high (0.01–0.1 g/l) concentrations of CuO NPs, a consistently high lipid content and an increase in concentrations of polysaccharides and proteins were revealed.   Conclusion. Understanding the complex interaction mechanisms of nanometals and biofilms will contribute to the development of effective biocatalysts based on immobilized bacterial cells. Also, the obtained data can be used to combat unwanted biofilms with the help of metal nanoparticles

    Statins in unconventional secretion of insulin-degrading enzyme and degradation of the amyloid-β peptide.

    Get PDF
    Population-based studies demonstrated that statins might decrease the risk of developing Alzheimer's disease (AD). Statins inhibit the 3-hydroxy-3-methyl-glutaryl-coenzyme-A reductase and thereby de novo synthesis of cholesterol. Cell culture and animal studies indicated that cholesterol affects the proteolytic processing of the amyloid precursor protein and the generation of amyloid-β (Aβ). Recently, we have demonstrated that statins can also stimulate the degradation of Aβ. The statin-induced clearance of Aβ could be attributed to increased release of the insulin-degrading enzyme (IDE) via an exosome-related unconventional secretory pathway. Interestingly, this statin-induced secretion of exosome-associated IDE was independent of cellular cholesterol concentrations, but rather caused by impairment of isoprenoid biosynthesis and protein prenylation. We further identified a new hexapeptide sequence in the C-terminal region of IDE, named the SlyX motif that is critically involved in IDE secretion. Taken these findings together, the increased clearance of Aβ by stimulated secretion of IDE might contribute to the protective effects of statins against AD

    Neutron Bang Time Detector Based on a Light Pipe

    Get PDF
    A neutron bang time detector consisting of a scintillator, light pipe, photomultiplier tube (PMT), and high-bandwidth oscilloscope has been implemented on the 60-beam, 30-kJ OMEGA Laser Facility at the University of Rochester's Laboratory for Laser Energetics. Light from the scintillator, located 23 cm from the target, is transmitted outside the target bay through a 9.6-m-long, 2-in.-diam polished stainless steel pipe to the PMT. The PMT signal is recorded by two channels of a 6-GHz, 10-GS/s Tektronix 6604 oscilloscope. The OMEGA optical fiducial pulse train is recorded on the third oscilloscope channel using a fast photodiode to provide the timing reference to the laser. The bang-time detector is absolutely calibrated in time and is able to measure bang time for neutron yields above 1 x 10{sup 9} with accuracy of better than 25 ps

    Quality of colonoscopy in an emerging country: A prospective, multicentre study in Russia

    Get PDF
    Background: The quality of colonoscopy has been related to a higher risk of interval cancer, and this issue has been addressed extensively in developed countries. The aim of our study was to explore the main quality indicators of colonoscopy in a large emerging country. Methods: Consecutive patients referred for colonoscopy in 14 centres were prospectively included between July and October 2014. Before colonoscopy, several clinical and demographic variables were collected. Main quality indicators (i.e. caecal intubation rate, (advanced) adenoma detection rate, rate of adequate cleansing and sedation) were collected. Data were analysed at per patient and per centre level (only for those with at least 100 cases). Factors associated with caecal intubation rate and adenoma detection rate were explored at multivariate analysis. Results: A total of 8829 (males: 35%; mean age: 57 + 14 years) patients were included, with 11 centres enrolling at least 100 patients. Screening (including non-alarm symptoms) accounted for 59% (5188/8829) of the indications. Sedation and split preparation were used in 26% (2294/8829) and 25% (2187/8829) of the patients. Caecal intubation was achieved in 7616 patients (86%), and it was ≥85% in 8/11 (73%) centres. Adenoma detection rate was 18% (1550/8829), and it was higher than 20% in five (45%) centres, whilst it was lower than 10% in four (33%) centres. At multivariate analysis, age (OR: 1.020, 95% CI: 1.015–1.024), male sex (OR: 1.2, 95% CI: 1.1–1.3), alarm symptoms (OR: 1.8, 95% CI: 1.7–2), split preparation (OR: 1.4, 95% CI: 1.2–1.6), caecal intubation rate (OR: 1.6, 95% CI: 1.3–1.9) and withdrawal time measurement (OR: 1.2, 95% CI: 1.6–2.1) were predictors of a higher adenoma detection rate, while adequate preparation (OR: 3.4: 95% CI: 2.9–3.9) and sedation (OR: 1.3; 95% CI: 1.1–1.6) were the strongest predictors of caecal intubation rate. Conclusions: According to our study, there is a substantial intercentre variability in the main quality indicators. Overall, the caecal intubation rate appears to be acceptable in most centres, whilst the overall level of adenoma detection appears low, with less than half of the centres being higher than 20%. Educational and quality assurance programs, including higher rates of sedation and split regimen of preparation, may be necessary to increase the key quality indicators

    Two-Stage Rotational Disordering of a Molecular Crystal Surface: C60

    Get PDF
    We propose a two-stage mechanism for the rotational surface disordering phase transition of a molecular crystal, as realized in C60_{60} fullerite. Our study, based on Monte Carlo simulations, uncovers the existence of a new intermediate regime, between a low temperature ordered (2×2)(2 \times 2) state, and a high temperature (1×1)(1 \times 1) disordered phase. In the intermediate regime there is partial disorder, strongest for a subset of particularly frustrated surface molecules. These concepts and calculations provide a coherent understanding of experimental observations, with possible extension to other molecular crystal surfaces.Comment: 4 pages, 2 figure

    Morphology of supported polymer electrolyte ultra-thin films: a numerical study

    Full text link
    Morphology of polymer electrolytes membranes (PEM), e.g., Nafion, inside PEM fuel cell catalyst layers has significant impact on the electrochemical activity and transport phenomena that determine cell performance. In those regions, Nafion can be found as an ultra-thin film, coating the catalyst and the catalyst support surfaces. The impact of the hydrophilic/hydrophobic character of these surfaces on the structural formation of the films has not been sufficiently explored yet. Here, we report about Molecular Dynamics simulation investigation of the substrate effects on the ionomer ultra-thin film morphology at different hydration levels. We use a mean-field-like model we introduced in previous publications for the interaction of the hydrated Nafion ionomer with a substrate, characterized by a tunable degree of hydrophilicity. We show that the affinity of the substrate with water plays a crucial role in the molecular rearrangement of the ionomer film, resulting in completely different morphologies. Detailed structural description in different regions of the film shows evidences of strongly heterogeneous behavior. A qualitative discussion of the implications of our observations on the PEMFC catalyst layer performance is finally proposed

    Core conditions for alpha heating attained in direct-drive inertial confinement fusion

    Get PDF
    It is shown that direct-drive implosions on the OMEGA laser have achieved core conditions that would lead to significant alpha heating at incident energies available on the National Ignition Facility (NIF) scale. The extrapolation of the experimental results from OMEGA to NIF energy assumes only that the implosion hydrodynamic efficiency is unchanged at higher energies. This approach is independent of the uncertainties in the physical mechanism that degrade implosions on OMEGA, and relies solely on a volumetric scaling of the experimentally observed core conditions. It is estimated that the current best-performing OMEGA implosion [Regan et al., Phys. Rev. Lett. 117, 025001 (2016)10.1103/PhysRevLett.117.025001] extrapolated to a 1.9 MJ laser driver with the same illumination configuration and laser-target coupling would produce 125 kJ of fusion energy with similar levels of alpha heating observed in current highest performing indirect-drive NIF implosions.United States. Department of Energy (DE-FC02-04ER54789)United States. National Nuclear Security Administration (DE-NA0001944

    Measurement of the WW Boson Mass

    Full text link
    A measurement of the mass of the WW boson is presented based on a sample of 5982 WeνW \rightarrow e \nu decays observed in ppp\overline{p} collisions at s\sqrt{s} = 1.8~TeV with the D\O\ detector during the 1992--1993 run. From a fit to the transverse mass spectrum, combined with measurements of the ZZ boson mass, the WW boson mass is measured to be MW=80.350±0.140(stat.)±0.165(syst.)±0.160(scale)GeV/c2M_W = 80.350 \pm 0.140 (stat.) \pm 0.165 (syst.) \pm 0.160 (scale) GeV/c^2.Comment: 12 pages, LaTex, style Revtex, including 3 postscript figures (submitted to PRL
    corecore