13 research outputs found

    Vergleichsmessungen von Ozon-Vertikalprofilen zwischen vier Lidar- und drei In-situ-Messsystemen Abschlussbericht

    No full text
    Vertical ozone profiles taken with four collocated differential-absorption lidar systems were compared with in-situ measurements from a UV absorption and a chemiluminescence ozone analyzer on board an airplane and a tether balloon. A third system, also of the uv absorption type, was installed on a high-rise building 130 m above ground level. Spatial overlap between the airplane and the balloon data, although limited by the minimum flight height required for the airplane and the ceiling of the balloon, showed that ozone in the lower troposphere exhibits considerable natural variation. The lidar data were communicated to the data evaluation group without knowledge of the reference profiles and of the ozone data from the other lidar systems. Lidar data agree well with the in-situ data if the lidars are operated in compliance with the recommendations of the Commission of Air Pollution Prevention of VDI and DIN (KRdL). There is, on average, no bias of the lidar with respect to the reference concentrations. Best lidar results are obtained if, by an experienced operator or via a special algorithm, data are cut out that are contaminated by large backscatter gradients at the edges of patches of fog or clouds. (orig.)Vertikalprofile der Ozonkonzentration, die von vier nebeneinander aufgestellten Lidarsystemen gemessen wurden, werden mit einem Referenzprofil verglichen, das mit einem UV-Absorptionsphotometer von einem Flugzeug und einem Chemilumineszenzdetektor von einem Fesselballon aus aufgenommen wurden. Die Lidare arbeiten nach dem Prinzip der differentiellen Absorption und Streuung. Ein weiteres In-situ-Messsystem, ebenfalls auf dem Absorptionsprinzip beruhend, war in 130 m Hoehe auf dem Dach eines Hochhauses installiert. Zwar war der raeumliche Ueberlappbereich zwischen Flugzeug (bedingt durch dessen Minimalflughoehe ueber dem Messgebiet) und Fesselballon (durch dessen Scheitelhoehe) begrenzt, aber ausreichend fuer die Bestimmung eines Referenzprofils mit Konfidenzintervall. Die Lidarergebnisse wurden ohne Kenntnis der Referenzprofile und der jeweils anderen Lidarergebnisse erstellt. Dabei zeigten sich betraechtliche natuerliche Variationen der Ozonkonzentration in der unteren Troposphaere. Werden die Lidarsysteme entsprechend den Empfehlungen der Kommission Reinhaltung der Luft (KRdL) im VDI und DIN betrieben, so stimmen die Resultate in der Regel gut mit den Referenzwerten ueberein. Im Mittel stimmen die Lidar-Konzentrationen mit den Referenzwerten genau ueberein. Die besten Lidarresultate werden erzielt, wenn Signalpaare, die durch Anwesenheit von Wolkenfetzen oder Nebelschwaden kontaminiert sind, von einem erfahrenen Operateur oder durch einen geeigneten Algorithmus aus dem Messdatensatz ausgeschlossen werden. (orig.)SIGLEAvailable from TIB Hannover: RA 3251(2001/24) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Bildung und Forschung, Berlin (Germany)DEGerman

    Struktur, Aufbau und statistische Programmbibliothek der meteorologischen Datenbank am Potsdam-Institut fuer Klimaforschung

    No full text
    The relational database management system (ORACLE) using different client interfaces (browser, SQL, precompiler) is the most important basis for data organization and storage. The creation of a data bank system at PIK includes: Acquisition of meteorological data series for the projects executed at PIK; development of a database structure on the basis of daily values; control, analysis and classification of data into given storage formats; development and application of statistical software. There are currently 20 different types of data sets with daily, monthly and annual data which are functionally interconnected and updated. All data sets are continuously updated. (orig.)Wesentliche Grundlage der Datenorganisation und -speicherung bildet das relationale Datenbanksystem ORACLE mit den dazugehoerigen Werkzeugen (Browser, SQL- und Precompiler). Die Entwicklung des Datenbanksystems am PIK umfasst folgende Etappen: - Erwerb von meteorologischen Datensaetzen fuer die am Institut laufenden Forschungsvorhaben; - Entwicklung einer Speicherstruktur auf der Basis von Tageswerten; - Kontrolle, Analyse und Einordnung der Daten in die vorgegebenen Speicherformate; - Entwicklung der zur Datennutzung notwendigen statistischen Programmbibliothek. Zur Zeit gibt es 20 verschiedene Typen von Datensaetzen. Sie enthalten taegliche, monatliche und jaehrliche Daten und sind funktional miteinander verbunden. Alle Datensaetze werden kontinuierlich erweitert. (orig.)Available from TIB Hannover: RR 5801(49) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEDEGerman

    Ortsaufgeloeste optische Fernmessung gasfoermiger Luftschadstoffe

    No full text
    Differential-absorption and scattering lidar, or DIAL, is an optical technique for the remote, depth-resolved determination of gaseous pollutants. Dust and other aerosols can be characterized by their absorption coefficient and can thus also be measured. The technique is described and a practical instrument, ARGOS, is presented. Three examples illustrate its use. A discussion of possible applications and of the potential and limitations of the new technique conclude the article. (orig.)Special print from Gefahrstoffe - Reinhaltung der Luft, v. 58(3) 1998Available from TIB Hannover: RA 3251(98/E/18) / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEDEGerman
    corecore