29 research outputs found
Low-cost, high-resolution, fault-robust position and speed estimation for PMSM drives operating in safety-critical systems
In this paper it is shown how to obtain a low-cost, high-resolution and fault-robust position sensing system for permanent magnet synchronous motor drives operating in safety-critical systems, by combining high-frequency signal injection with binary Hall-effect sensors. It is shown that the position error signal obtained via high-frequency signal injection can be merged easily into the quantization-harmonic-decoupling vector tracking observer used to process the Hall-effect sensor signals. The resulting algorithm provides accurate, high-resolution estimates of speed and position throughout the entire speed range; compared to state-of-the-art drives using Hall-effect sensors alone, the low speed performance is greatly improved in healthy conditions and also following position sensor faults. It is envisaged that such a sensing system can be successfully used in applications requiring IEC 61508 SIL 3 or ISO 26262 ASIL D compliance, due to its extremely high mean time to failure and to the very fast recovery of the drive following Hall-effect sensor faults at low speeds. Extensive simulation and experimental results are provided on a 3.7 kW permanent magnet drive
A V2G Integrated Battery Charger Based on an Open End Winding Multilevel Configuration
A new approach to obtain an integrated battery charger is described in this paper, based on the Asymmetrical Hybrid Multilevel Converter topology. Such a particular open-end winding motor configuration, which has proved to be more efficient than conventional inverter topologies in EV motor drive applications, can be turned in an on-board battery charger only by acting on the control system. Thus, no circuit reconfiguration through electro-mechanical switches is required. Moreover, by introducing a single extra power switch, a bilateral power flow can be managed enabling vehicle to grid operations. The obtained integrated battery charger can be supplied either by a standard ac single-phase grid, either by a dc power source for direct connection to domestic energy resources. The proposed approach enables a new remarkable function to the asymmetrical hybrid multilevel converter at a marginal extra cost, thus mitigating the larger complexity and cost of such an inverter if compared with conventional topologies
Sulla Stima della Posizione del Flusso Mediante la Modulazione della Saturazione in Macchine in Corrente Alternata.
Multi-Criteria Experimental Comparison of Batteries Circuital Models for Automotive Applications
Electrochemical batteries used in energy storage systems provide a significant contribution to the development of smart grids and green transportation. In recent years, intensive research activities have been oriented to the optimal management of energy storage systems for power electronics applications in fast growing industrial sectors as EVs and HEVs. The accurate modeling of electrochemical batteries is fundamental in the design of control algorithms applied to energy storage systems. Focusing on automotive applications, in this paper a comprehensive analysis of ESS models based on equivalent electric circuits using a multi-criteria approach is presented. An extensive experimental validation has been carried out to evaluate the performance of battery models in automotive applications
Sine Wave Filters Design for AC Motor Drives with Genetic Algorithms
This paper proposes a suitable design methodology of the filter used at the output of inverters for AC motor drives. While it allows to achieve the best tradeoff among different design constraints that are difficult to include in standard design methods, such an approach is able to simultaneously consider several technical issues such as losses and voltage drops of the filter, total harmonic distortion of currents and voltages as well as economic aspects. Accordingly, the proposed procedure determines the optimal values of the filter parameters by exploiting simulations of accurate model of the electrical drive and genetic algorithms. Hence, no rough approximations or complex analytical calculations are performed to suitably design the inverter output filter. The method was validated by means of various tests performed on two different induction motor drives, considering some significant design constraint scenarios
An Averaged-Value Model of an Asymmetrical Hybrid Multi-Level Rectifier
The development and the validation of an averaged-value mathematical model of an asymmetrical hybrid multi-level rectifier is presented in this work. Such a rectifier is composed of a three-level T-type unidirectional rectifier and of a two-level inverter connected to an open-end winding electrical machine. The T-type rectifier, which supplies the load, operates at quite a low switching frequency in order to minimize inverter power losses. The two-level inverter is instead driven by a standard sinusoidal pulse width modulation (SPWM) technique to suitably shape the input current. The two-level inverter also plays a key role in actively balancing the voltage across the DC bus capacitors of the T-type rectifier, making unnecessary additional circuits. Such an asymmetrical structure achieves a higher efficiency compared to conventional PWM multilevel rectifiers, even considering extra power losses due to the auxiliary inverter. In spite of its advantageous features, the asymmetrical hybrid multi-level rectifier topology is a quite complex system, which requires suitable mathematical tools for control and optimization purposes. This paper intends to be a step in this direction by deriving an averaged-value mathematical model of the whole system, which is validated through comparison with other modeling approaches and experimental results. The paper is mainly focused on applications in the field of electrical power generation; however, the converter structure can be also exploited in a variety of grid-connected applications by replacing the generator with a transformer featuring an open-end secondary winding arrangement