Response of 'Merlot' (Vitis vinifera) grapevine to defoliation caused by downy mildew (Plasmopara viticola) during the following growing season

The downy mildew (Plasmopara viticola) epidemics on leaf canopy during the ripening phase causes a stress situation for the grapevine. The plant compensates the carbohydrate request of the berries mobilising the carbohydrate reserves stored in the woody parts. In this fourth study the impact of the reserves reduction on the growth and fertility and the recovering capacity of the plant were analysed during two consecutive periods of two years (first year = stress; second year = recovering). Two treatments were compared: “Untreated canopy” (to prevent quantity losses, the clusters were treated once with a contact fungicide at the discovery of the first downy mildew sporulation) and “Standard schedule” (schedule normally applied in the vineyard). The impact of decreased reserve contents in the following growth season has negatively influenced only the shoot elongation and the potential crop yield quantity of the “Untreated canopy” treatment. Nevertheless, a single recovery year was enough to rebuild the reserve pool particularly in the roots, confirming the acclimation potential of the grapevine.

Influence of Plasmopara viticola on gas exchange parameters on field-grown Vitis vinifera 'Merlot'

The impact of downy mildew (Plasmopara viticola) epidemic on main and lateral leaf assimilation capacity of Vitis vinifera 'Merlot' has been quantified, under field conditions during the ripening phase, by means of leaf gas exchange measurements. The aim was to describe the impact of different disease severity levels on the gas exchange rate of symptomless portions of main and lateral leaves and of the sporulating parts in comparison with healthy leaves. The measurements were carried out on plants normally treated and on plants where only the clusters were treated with a contact fungicide to prevent quantity yield losses. A drastic reduction in the photosynthetic rate was observed on the sporulating area of main and lateral leaf tissues. Stomatal and mesophyll conductance decreased and stomatal resistance increased, indicating the difficulty of CO2 diffusing through the stomata into the mesophyll to the site of carboxylation. Downy mildew affected more negatively the gas exchange parameters on the symptomless parts of a diseased lateral leaf than of a main leaf, indicating a greater susceptibility of lateral leaves. A decrease of stomatal conductance and, consequently, of the photosynthetic rate, transpiration and water use efficiency was observed already at low severity level with increments of the disease severity on the leaf. At the same time an increase of stomatal resistance on the symptomless area of a lateral leaf was measured. Visual assessment of the diseased leaf area didn’t reflect the actual part colonized by the pathogen and at least a portion of the leaf area determined as healthy has in fact a latent lesion. Therefore, the visual estimation of downy mildew infection may not give a good indication of the effect of the pathogen on host physiology. The results also emphasized the important role of downy mildew as a stress element for the plant during ripening phase, a source element for carbohydrate production.

Quantification of the influence of the downy mildew (Plasmopara viticola) epidemics on the compensatory capacities of Vitis vinifera 'Merlot' to limit the qualitative yield damage

A preview study on the analysis of the impact of downy mildew (Plasmopara viticola) epidemics on the plant growth and yield quality has shown no correlation between disease severity progress on the canopy and sugar accumulation in the berries from veraison until harvest, indicating the capacity of the vine to compensate a stress situation induced by the downy mildew damage on leaf canopy. In this study the compensation capacity of the plant was analysed during three years under field conditions comparing three different downy mildew control strategies: A = “Untreated canopy” (to prevent quantity losses, the clusters were treated once with a contact fungicide at the discovery of the first downy mildew sporulation); B = “Reduced fungicide schedule” (based on a first treatment at the appearance of the first symptoms, to avoid yield quantity losses followed by one or two additional fungicide applications during the early epidemic phase with the aim of delaying the epidemic). C = “Standard schedule” (schedule normally applied in the vineyard). The experimental plot was moved each year to avoid stress influence due to a repetition of the trials on the same place. The grapevine compensated for the carbohydrate requirements of the cluster by mobilizing the starch reserves stored in the woody parts. Roots were the most important site of carbohydrate accumulation used from the grapevine and the mobilisation was higher in treatment A followed by treatment B. This compensation did not completely exhaust the reserves of each woody part and lets suppose a hierarchical pattern of the mobilisation; first a mobilisation of the reserves stored in the roots, and secondly those from the trunk, cane and shoot. The downy mildew could be considered as a stress factor for the grapevine.

Quantitative effect of leaf damage caused by downy mildew (Plasmopara viticola) on growth and yield quality of grapevine 'Merlot' (Vitis vinifera)

The impact of downy mildew (Plasmopara viticola) epidemics on the plant growth and yield quality was analysed during three years under field conditions in order to show a relationship between disease severity on leaves and yield quality losses. Three different treatments were compared: A = “Untreated canopy” (to prevent quantity losses, the clusters were treated once with a contact fungicide at the discovery of the first downy mildew sporulation); B = “Reduced fungicide schedule” (based on a first treatment at the appearance of the first symptoms, to avoid yield quantity losses followed by one or two additional fungicide applications during the early epidemic phase with the aim of delaying the epidemic). C = “Standard schedule” (schedule normally applied in the vineyard). The experimental plot was moved each year to avoid stress influence due to a repetition of the trials on the same place. The epidemic progress in the treatment A has shown the same tendency during the three years with an increase starting from the beginning of the ripening phase. The disease severity was more important on the lateral than on the main leaves. During the three years of the study, the disease did not influence the amount of total healthy leaf area per plant until veraison. From this phenological stage until harvest, the healthy leaf area per plant decreased rapidly at the same time as the epidemic increased. The yield quantity was not affected indicating that a single fungicide application at the finding of the first sporulation was enough to preserve the crop production. Among the yield quality parameters, the sugar content has been negatively influenced by the downy mildew leaf damage. The difference was particularly evident between the treatments A and C with differences from 1.4 to 2.04 °Brix. Generally, treatment B didn’t differ from C. Sugar uptake in the berries begun to show a different dynamic between 7 and 14 days after the onset of ripening. No correlation between disease severity progress on the canopy and sugar accumulation in the berries from veraison until harvest was found, indicating the capacity of the vine to compensate a stress situation induced by the downy mildew damage on leaf canopy.

WT1 (Wilms' tumor suppressor gene)

Review on WT1 (Wilms' tumor suppressor gene), with data on DNA, on the protein encoded, and where the gene is implicated

Mapping quantitative physiological traits in apple ( Malus × domestica Borkh.)

Efficient breeding and selection of high-quality apple cultivars requires knowledge and understanding of the underlying genetics. The availability of genetic linkage maps constructed with molecular markers enables the detection and analysis of major genes and quantitative trait loci contributing to the quality traits of a genotype. A segregating population of the cross between the apple varieties 'sFiesta' (syn. 'sRed Pippin') and 'sDiscovery' has been observed over three years at three different sites in Switzerland and data on growth habit, blooming behaviour, juvenile period and fruit quality has been recorded. QTL analyses were performed, based on a genetic linkage map consisting of 804 molecular markers and covering all 17 apple chromosomes. With the maximum likelihood based interval mapping method, the investigated complex traits could be dissected into a number of QTLs affecting the observed characters. Genomic regions participating in the genetic control of stem diameter, plant height increment, leaf size, blooming time, blooming intensity, juvenile phase length, time of fruit maturity, number of fruit, fruit size and weight, fruit flesh firmness, sugar content and fruit acidity were identified and compared with previously mapped QTLs in apple. Although 'sDiscovery' fruit displayed a higher acid content, both acidity QTLs were attributed to the sweeter parent 'sFiesta'. This indicated homozygosity at the acidity loci in 'sDiscovery' preventing their detection in the progeny due to the lack of segregatio

WAGR (Wilms' tumor/aniridia/genitourinary anomalies/mental retardation syndrome)

Review on WAGR (Wilms' tumor/aniridia/genitourinary anomalies/mental retardation syndrome), with data on clinics, and the genes involved

Vacuum Rabi splitting and intracavity dark state in a cavity-atoms system

We report experimental measurements of the transmission spectrum of an optical cavity coupled with cold Rb atoms. We observe the multi-atom vacuum Rabi splitting of a composite cavity and atom system. When a coupling field is applied to the atoms and induces the resonant two-photon Raman transition with the cavity field in a Lamda-type three-level system, we observe a cavity transmission spectrum with two vacuum Rabi sidebands and a central peak representing the intracavity dark state. The central peak linewidth is significantly narrowed by the dark-state resonance and its position is insensitive to the frequency change of the empty cavity.Comment: 11 pages, 4 figure

Modeling of a Hot Gas Bypass Test Block for Centrifugal Compressors

The increasingly competitive building equipment and control industry pushes manufacturers to devote more resources each year to research and development, continually improving the performance and efficiency of their products to develop and maintain a competitive edge. Compressor development is an expensive endeavor because of prototyping and testing costs, but the cost and time required for testing can be minimized by developing a model of the compressor test block to predict its behavior with a given prototype compressor at specified operating conditions. This paper presents a thermodynamic model of a hot gas bypass test block used to evaluate centrifugal compressor performance at a compressor development facility. The test block uses cooling towers to reject the heat of compression to outdoor air, and experience has shown that the range of achievable compressor test conditions can be limited by outdoor air temperature and humidity, which control the heat rejection rate. Therefore, one goal of the model development was to provide a means for evaluating the feasibility of tests at given ambient conditions. By incorporating models of the cooling towers into the test block model, test operators now are able to predict the range of compressor suction and discharge conditions that can be tested under the current outdoor air conditions. A second goal of the model was to assist in selecting the orifice plate used in the orifice flow meter that measures mass flow through the compressor. Operators previously had to make an educated guess as to the best orifice plate size in advance of running the tests, but the model now identifies the orifice diameters that result in pressure drops within the desired range, minimizing the trial and error involved in testing. The model assumes that the system operates at steady-state conditions and uses a compressor map to model expected prototype compressor performance. Therefore, this paper focuses on the condenser and cooling tower models, which are the most important elements for predicting the impact of outdoor conditions on cycle performance. It is shown that the resulting model achieves reasonable agreement with experimental data and provides a useful orifice selection routine

Molecular markers linked to the apple scab resistance gene Vbj derived from Malus baccata jackii

Breeding for scab-resistant apple cultivars by pyramiding several resistance genes in the same genetic background is a promising way to control apple scab caused by the fungus Venturia inaequalis. To achieve this goal, DNA markers linked to the genes of interest are required in order to select seedlings with the desired resistance allele combinations. For several apple scab resistance genes, molecular markers are already available; but until now, none existed for the apple scab resistance gene Vbj originating from the crab apple Malus baccata jackii. Using bulk segregant analysis, three RAPD markers linked to Vbj were first identified. These markers were transformed into more reliable sequence-characterised amplified region (SCAR) markers that proved to be co-dominant. In addition, three SSR markers and one SCAR were identified by comparing homologous linkage groups of existing genetic maps. Discarding plants showing genotype-phenotype incongruence (GPI plants) plants, a linkage map was calculated. Vbj mapped between the markers CH05e03 (SSR) and T6-SCAR, at 0.6cM from CH05e03 and at 3.9cM from T6-SCAR. Without the removal of the GPI plants, Vbj was placed 15cM away from the closest markers. Problems and pitfalls due to GPI plants and the consequences for mapping the resistance gene accurately are discussed. Finally, the usefulness of co-dominant markers for pedigree analysis is also demonstrate