Axial condyle morphology and horizontal condylar angle in patients with internal derangement compared to asymptomatic volunteers

The purpose of this study was to evaluate the possible structural variations of axial condyle morphology and horizontal condylar angle between patients with internal derangement and asymptomatic volunteers. Forty-five symptomatic patients and 31 asymptomatic volunteers (AV) were included in this study. All subjects had bilateral high-resolution magnetic resonance imaging scans. Axial condyle morphology was evaluated using these images and classified into four diagnostic groups: convex, flat, and concave anterior surfaces, and tapered form. The angulation between the condylar long axis and the transversal plane was then measured. A Wilcoxon-Whitney-Mann-U-test demonstrated no significant differences in the horizontal angulation of the patients with disk displacement with reduction (DDR) (24.35 +/- 9.31) as compared to patients with displacement without reduction (DDN) (25.61 +/- 10.11) and asymptomatic volunteers (25.68 +/- 9.31) (AV). Eighty percent of the flat type condyles and 73.3% of the tapered type condyles belonged to the symptomatic patients with disk displacement with reduction (DDR) and without reduction (DDN). Chi-square test demonstrated significant differences between the diagnostic groups of condyle types (p < 0.01). A comparison of the angular difference of right and left joints of asymptomatic volunteers and patients using the Wilcoxon-Whitney-Mann-U-test showed that the results of the asymptomatic volunteers were significantly lower (p = 0.05). The conclusion that an increase in the horizontal condylar angle is a predisposing factor for the development of internal derangement or that the derangement develops during the prognosis of the disorder could not be clearly stated based on the results of this study. It is proposed that the difference between condyle morphology in patients with disk displacement and asymptomatic volunteers may be a result of the remodeling or degeneration caused by the disorder

Influence of plasma pretreatment on shear bond strength of self-adhesive resin cements to polyetheretherketone

OBJECTIVES: The aim of this study is to evaluate the adhesion between PEEK and two self-adhesive resin cements after plasma treatment. METHODS: Eight hundred sixty-four polyetheretherketone (PEEK) disks were cut and polished to silicon carbide (SIC) P4000. One half of the specimens were randomly selected and pretreated with plasma, whereas the remaining 432 specimens remained untreated. Subsequently, specimens were randomly allocated to four groups (n = 108/group): Visio.link (Bredent), Signum PEEK Bond (Heraeus Kulzer), Ambarino P60 (Creamed), and a control group without additional treatment. Half of the specimens of each group (n = 54) were then cemented with either RelyX Unicem Automix 2 (3 M ESPE) or with Clearfil SA (Kuraray). All specimens were stored in water for 24 h (37 °C). Afterwards, specimens were divided into three groups (n = 18) for different aging levels: (1) no aging (baseline measurement), (2) thermal aging for 5,000 cycles (5/55 °C), and (3) thermal aging for 10,000 cycles (5/55 °C). Thereafter, shear bond strengths (SBS) were measured, and failure types (adhesive, mixed, and cohesive) were assessed. Data were analyzed using descriptive statistics, four- and one-way ANOVA followed by a post hoc Scheffé test (p < 0.05). RESULTS: No adhesion could be established without adhesive pretreatment, irrespectively, whether plasma was applied or not. Also, no bond strength was measured when Ambarino P60 was applied. In contrast, adhesive pretreatment resulted in SBS ranging between 8 and 15 MPa. No significant differences were found between the resin cements used. In general, no cohesive failures were observed. Groups without plasma treatment combined with Visio.link or Signum PEEK Bond showed predominantly mixed failure types. Control groups, plasma treated, or treated using Ambarino P60 groups fractured predominantly adhesively. CONCLUSION: The use of methyl methacrylate (MMA)-based adhesives allows bonding between PEEK and self-adhesive resin cements. Plasma treatment has no impact on bond to resin cements. CLINICAL SIGNIFICANCE: PEEK reconstructions can be cemented using self-adhesive resin cements combined with pretreatment with MMA-based adhesives

The randomized shortened dental arch study : oral health-related quality of life

Although the shortened dental arch (SDA) concept is a widely accepted strategy to avoid overtreatment, little is known on its impact on oral health-related quality of life (OHRQoL). This multicenter randomized controlled trial aimed to investigate the OHRQoL for removable partial dental prostheses (RPDP) with molar replacement versus the SDA concept