Test in a beam of large-area Micromegas chambers for sampling calorimetry

Application of Micromegas for sampling calorimetry puts specific constraints on the design and performance of this gaseous detector. In particular, uniform and linear response, low noise and stability against high ionisation density deposits are prerequisites to achieving good energy resolution. A Micromegas-based hadronic calorimeter was proposed for an application at a future linear collider experiment and three technologically advanced prototypes of 1$\times$1 m$^{2}$ were constructed. Their merits relative to the above-mentioned criteria are discussed on the basis of measurements performed at the CERN SPS test-beam facility

Simplified transformation of ostreococcus tauri using polyethylene glycol

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. Ostreococcustauri is an easily cultured representative of unicellular algae (class Mamiellophyceae) that abound in oceans worldwide. Eight complete 13–22 Mb genomes of phylogenetically divergent species within this class are available, and their DNA sequences are nearly always present in metagenomic data produced from marine samples. Here we describe a simplified and robust transformation protocol for the smallest of these algae (O. tauri). Polyethylene glycol (PEG) treatment was much more effcient than the previously described electroporation protocol. Short (2 min or less) incubation times in PEG gave >104 transformants per microgram DNA. The time of cell recovery after transformation could be reduced to a few hours, permitting the experiment to be done in a day rather than overnight as used in previous protocols. DNA was randomly inserted in the O. tauri genome. In our hands PEG was 20–40-fold more effcient than electroporation for the transformation of O. tauri, and this improvement will facilitate mutagenesis of all of the dispensable genes present in the tiny O. tauri genome

The Olfactory Threshold of Rotundone in Brandy is Ten-fold Higher than in Wine and does not Increase with the Complexity of the Matrix

Rotundone is the only known aroma compound imparting a peppery aroma to wine. Its presence hasrecently been documented in spirits, notably those aged in oak barrels. However, the sensory contributionof rotundone in such alcoholic beverages remains hard to predict, given their high ethanol level. The aimof this study was to estimate olfactory thresholds for rotundone in brandy using three different matrices.Rotundone concentrations in the unspiked samples were 50 ng/L for wine distillate and 135 ng/L for brandy,demonstrating for the first time the presence of rotundone in such spirits and a possible endogenous origin.The olfactory detection threshold was estimated at 103 ng/L in 40% (v/v) ethanol solution, while differencethresholds were 171 ng/L and 189 ng/L in fresh wine distillate and young French brandy, respectively, bothstandardised at 40% (v/v). These thresholds were 10-fold higher than in wines and did not significantlydiffer according to the complexity of the matrix. Our results, which are still preliminary and would deserveto be validated with a larger number of samples and using a higher number of panellists, open new fieldsof investigation for a deeper exploration of the concentration range of rotundone in brandies, particularlythose that underwent a longer ageing period in barrels

Effect of argon ion energy on the performance of silicon nitridemultilayer permeation barriers grown by hot-wire CVD on polymers

One of the authors (S.M.) acknowledges Direction des Relations Extérieures of Ecole Polytechnique for financial support.Permeation barriers for organic electronic devices on polymer flexible substrates were realized by combining stacked silicon nitride (SiNx) single layers (50 nm thick) deposited by hot-wire chemical vapor deposition process at low-temperature (~100°C) with a specific argon plasma treatment between two successive layers. Several plasma parameters (RF power density, pressure, treatment duration) as well as the number of single layers have been explored in order to improve the quality of permeation barriers deposited on polyethylene terephthalate. In this work, maximumion energy was highlighted as the crucial parameter making it possible to minimize water vapor transmission rate (WVTR), as determined by the electrical calcium test method, all the other parameters being kept fixed. Thus fixing the plasma treatment duration at 8 min for a stack of two SiNx single layers, a minimum WVTR of 5 × 10−4 g/(m2 day), measured at room temperature, was found for a maximum ion energy of ~30 eV. This minimum WVTR value was reduced to 7 × 10−5 g/(m2 day) for a stack of five SiNx single layers. The reduction in the permeability is interpreted as due to the rearrangement of atoms at the interfaces when average transferred ion energy to target atoms exceeds threshold displacement energy.The authors are grateful to Dr. R. Cortes (PMC, Ecole Polytechnique) for XRR analysis, to Dr. P. Chapon (HORIBA Jobin Yvon) for GD-OES analysis and Dr. J. Leroy (CEA Saclay) for XPS analysis. This work was partly supported by the PICS (FrenchPortuguese) project No. 5336. One of the authors (S.M.) acknowledges Direction des Relations Extérieures of Ecole Polytechnique for financial support

Influence of low energy argon plasma treatment on the moisture barrier performance of hot wire-CVD grown SiNx multilayers

The reliability and stability are key issues for the commercial utilization of organic photovoltaic devices based on flexible polymer substrates. To increase the shelf-lifetime of these devices, transparent moisture barriers of silicon nitride (SiNx) films are deposited at low temperature by hot wire CVD (HW-CVD) process. Instead of the conventional route based on organic/inorganic hybrid structures, this work defines a new route consisting in depositing multilayer stacks of SiNx thin films, each single layer being treated by argon plasma. The plasma treatment allows creating smoother surface and surface atom rearrangement. We define a critical thickness of the single layer film and focus our attention on the effect of increasing the number of SiNx single-layers on the barrier properties. A water vapor transmission rate (WVTR) of 2 x 10-4 g/(m2 day) is reported for SiNx multilayer stack and a physical interpretation of the plasma treatment effect is given.Direction des Relations Extérieures, Ecole PolytechniquePICS (French–Portuguese No. 5336) projec

Flexible organic–inorganic hybrid layer encapsulation for organic opto-electronic devices

In this work we produce and study the flexible organic–inorganic hybrid moisture barrier layers for the protection of air sensitive organic opto-electronic devices. The inorganic amorphous silicon nitride layer (SiNx:H) and the organic PMMA [poly (methyl methacrylate)] layer are deposited alternatingly by using hot wire chemical vapor deposition (HW-CVD) and spin-coating techniques, respectively. The effect of organic–inorganic hybrid interfaces is analyzed for increasing number of interfaces. We produce highly transparent (∼80% in the visible region) hybrid structures. The morphological properties are analysed providing a good basis for understanding the variation of the water vapor transmission rate (WVTR) values. A minimum WVTR of 4.5 × 10−5g/m2day is reported at the ambient atmospheric conditions for 7 organic/inorganic interfaces. The hybrid barriers show superb mechanical flexibility which confirms their high potential for flexible applications.The authors would like to thank Dr. J.C. Vanel for help in electrical characterizations used in this study. The first author (S.M) acknowledges the financial support from Direction des Relations Extérieures, Ecole Polytechnique during his thesis

The effect of argon plasma treatment on the permeation barrier properties of silicon nitride layers

In this work we produce and study silicon nitride (SiNx) thin films deposited by Hot Wire Chemical Vapor Depo- sition (HW-CVD) to be used as encapsulation barriers for flexible organic photovoltaic cells fabricated on poly- ethylene terephthalate (PET) substrates in order to increase their shelf lifetime. We report on the results of SiNx double-layers and on the equivalent double-layer stack where an Ar-plasma surface treatment was performed on the first SiNx layer. The Ar-plasma treatment may under certain conditions influences the structure of the interface between the two subsequent layers and thus the barrier properties of the whole system. We focus our attention on the effect of plasma treatment time on the final barrier properties. We assess the encapsulation barrier properties of these layers, using the calcium degradation test where changes in the electrical conductance of encapsulated Ca sensors are monitored with time. The water vapor transmission rate (WVTR) is found to be ~3 × 10−3 g/m2·day for stacked SiNx double-layer with 8 min Ar plasma surface treatment.FCT - CNRS PICS (French–Portuguese no: 5336) projectDirection des Relations Extérieures, Ecole Polytechniqu

Modelling of simple cases in view of active stabilisation for a future linear collider

Final focus magnet stabilisation is an important issue when working with nanometre size beams. The present study focuses on mechanical stabilisation. As a first step, the case of a 1m free-fixed aluminium beam placed on a table with active stabilisation has been studied. This work describes three aspects, namely, sensors and actuators to measure and compensate ground motion, mechanical simulations and a feedback loop. Measurements done with low frequency velocity sensors (down to 0.1Hz) in our Annecy lab during office hours show that the displacement RMS on the active table is 1nm at 4Hz compared to 10nm without active stabilisation. Simulations of the dynamic response of the beam have been compared to measurements done with accelerometers placed on the clamping and on the free end of the aluminium beam. The results are in good agreement. We are therefore able to predict by simulation the response of a structure subjected to an external excitation. A first sketch of a feedback loop to compensate specific vibrations has also been developed and allows the simultaneous elimination of several resonance peaks on a reduced-size mock-up. This algorithm will be applied to stabilise a larger mock-up, leading to more realistic experimental conditions. In future tests, the active table will globally stabilise in a range of frequencies from 0.5Hz to 50Hz whereas the feedback loop will compensate single strong resonances

Return to sport and re-tears after anterior cruciate ligament reconstruction in children and adolescents

BACKGROUND: The primary objective of this study was to determine the time to and level of return to sports after anterior cruciate ligament (ACL) reconstruction in children and adolescents. The secondary objectives were to evaluate the risk of early ACL re-tear after return to sports and the risk of ACL tear in the contralateral knee. HYPOTHESIS: The time to return to sports in young patients is considerably longer than in adults. METHODS: A prospective multicentre study was conducted at 12 centres specialised in knee ligament surgery, in children and adolescents younger than 18 years, between 1 January 2015 and 31 October 2015. The patients were divided into a paediatric group with open physes and a skeletally mature group with closed physes. We recorded the time to return to sport, the type of sport resumed, and the occurrence of early re-tears on the same side. A poor outcome was defined as a re-tear or an objective IKDC score of C or D. A contralateral ACL tear was not considered a poor outcome. RESULTS: Of 278 included patients, 100 had open physes and 178 closed physes. In the open physes group, return to running occurred after 10.4±4.7 months, return to pivoting/contact sport training after 13.1±3.9 months, and return to pivoting/contact sport competitions after 13.8±3.8 months. Of the 100 patients, 80% returned to the same sport and 63.5% to pivoting/contact sport competitions. Re-tears occurred in 9% of patients, after 11.8±4.1 months, and contralateral tears in 6% of patients, after 17.2±4.4 months. In all, 19.4% of patients had a poor outcome, including 10.4% with an IKDC score of C or D and 9% with re-tears. In the group with closed physes, return to running occurred after 8.8±5.1 months, return to pivoting/contact sport training after 11.7±4.7 months, and return to pivoting/contact sport competitions after 12.3±4.2 months. Of the 178 patients, 76.9% returned to the same sport and 55.6% to pivoting/contact sport competitions. The re-tear rate was only 2.8% and the contralateral tear rate 5%. In all, 14.7% of patients had poor outcome, including 11.9% with an IKDC score of C or D and 2.8% with re-tears. No risk factors for re-tears were identified; the quadruple-bundle semitendinosus technique showed a non-significant association with re-tears. CONCLUSION: In young children, the return to sport time after ACL reconstruction is considerably longer than 1 year and the return to competitions occurs later and is more difficult. The results of this study indicate that reservations are in order when informing the family about return to sports prospects after ACL reconstruction. The return to pivoting/contact sport competitions should not be allowed until 14 months after surgery in young skeletally immature patients, and the risk of re-injury is high within the first 2 years. LEVEL OF EVIDENCE: IV, retrospective study