High-order optical nonlinearity at low light levels

We observe a nonlinear optical process in a gas of cold atoms that simultaneously displays the largest reported fifth-order nonlinear susceptibility \chi^(5) = 1.9x10^{-12} (m/V)^4 and high transparency. The nonlinearity results from the simultaneous cooling and crystallization of the gas, and gives rise to efficient Bragg scattering in the form of six-wave-mixing at low-light-levels. For large atom-photon coupling strengths, the back-action of the scattered fields influences the light-matter dynamics. This system may have important applications in many-body physics, quantum information processing, and multidimensional soliton formation.Comment: 5 pages, 3 figure

Segregation and ordering at the (1×2) reconstructed Pt80Fe20(110) surface determined by low-energy electron diffraction

The surface of an ordered Pt80Fe20(110) crystal exhibits (1×2) and (1×3) reconstructions depending on the annealing treatment after ion bombardment. The (1×3) structure occurs after annealing in the range 750 to 900 K. Annealing above 1000 K leads to the (1×2) structure, which is, from the present result, unambiguously attributed to the same geometrical reconstruction as Pt(110) but with smaller relaxation amplitudes: a detailed low-energy electron-diffraction analysis concludes to a missing-row structure with row pairing in layers 2 and 4 accompanied by a buckling in layers 3 and 5. The top layer spacing is contracted by 13%, and further relaxations are detectable down to the fifth layer. The specific diffraction spots associated with the bulk chemical ordering along the dense [1¯10] rows are very weak: The I(V) analysis shows that this chemical ordering is absent in the outermost ‘‘visible’’ rows but gradually recovers over five to six layers deep. General Pt enrichment is found in the surface ‘‘visible’’ rows (in layers 1–3), but segregation and order yield a subtle redistribution of Pt and Fe atoms in deeper rows: For example, in layer 2, the visible row is Pt rich, whereas the other row (buried under layer 1) is enriched with Fe. Because of the many parameters considered, a fit procedure was applied to a large data basis to solve the structure; the results were confirmed and illustrated subsequently by a standard I(V) analysis for the most relevant parameters. The final r factors are RDE=0.36, RP=0.34, and RZJ=0.14 for two beam sets at normal and oblique incidence consisting of 26 and 21 beams, respectively

Genotoxic and stress inductive potential of cadmium in Xenopus laevis larvae

The present investigation evaluates the toxic potential of Cd in larvae of the frog Xenopus laevis after 12 days of exposure to environmentally relevant contamination levels, close to those measured in the river Lot (France). Several genotoxic and detoxification mechanisms were analyzed in the larvae: clastogenic and/or aneugenic effects in the circulating blood by micronucleus (MN) induction, metallothionein (MT) production in whole larvae, gene analyses and Cd content in the liver and also in the whole larvae. The results show: (i) micronucleus induction at environmental levels of Cd contamination (2, 10, 30 μg L−1); (ii) an increased and concentration-dependent quantity of MT in the whole organism after contamination with 10 and 30 μg Cd L−1 (a three- and six-fold increase, respectively) although no significant difference was observed after contamination with 2 μg Cd L−1; (iii) Cd uptake by the whole organism and by the liver as a response to Cd exposure conditions; (4) up-regulation of the genes involved in detoxification processes and response to oxidative stress, while genes involved in DNA repair and apoptosis were repressed. The results confirm the relevance of the amphibian model and highlight the complementarity between a marker of genotoxicity, MT production, bioaccumulation and genetic analysis in the evaluation of the ecotoxicological impact

Estimation de l'équivalent en eau du couvert nival au moyen d'images radar satellitaires

L'objectif de cette étude est de vérifier le potentiel des images radar à synthèse d'ouverture (RSO) pour estimer l'équivalent en eau du couvert nival sur le bassin de la rivière La Grande (Baie de James, Québec). Il s'agit d'un milieu dominé par une forêt ouverte d'épinettes noires, des brûlis et des tourbières. Cette information intéresse grandement Hydro-Québec qui gère plusieurs installations hydro-électriques dans cette région subarctique. Durant deux ans, six campagnes de terrain ont été réalisées sur le bassin de la rivière La Grande et une dizaine d'images RSO du satellite européen ERS-1 ont été acquises, étalonnées et géoréférencées, afin de déterminer la relation entre les coefficients de rétrodiffusion des images radar (hiver et automne) et la résistance thermique du couvert nival. Cette relation constitue la première partie d'un algorithme d'estimation de l'équivalent en eau. Elle utilise plus spécifiquement le rapport de rétrodiffusion, qui est la différence entre une image avec neige et une image sans neige. La deuxième partie de cette algorithme déduit l'équivalent en eau du couvert de neige à partir de sa résistance thermique et de sa densité, en se basant sur la relation physique établie par les mesures de terrain. L'équivalent en eau du couvert nival a donc été estimé pour quatre images de février et mars 1994 et 1995. L'erreur moyenne sur l'estimation de l'équivalent en eau de la neige au sol est de 2% à 3% (-5 à 7mm) sur l'ensemble des sites d'échantillonnage avec un écart-type de 14 à 19% (-35 à 45mm). Ces résultats ont encouragé Hydro-Québec à poursuivre la recherche avec les données du satellite canadien RADARSAT (opérationnel depuis le 1er avril 1996) et à développer un prototype pour la cartographie de l'équivalent en eau du couvert nival à partir d'images radar.The goal of this study was to evaluate the potential of synthetic aperture radar (SAR) images for estimating the snow water equivalent (SWE) on the La Grande river watershed (James Bay area, Québec). This information is of major interest for Hydro-Québec, which exploits many hydroelectric complexes throughout this subarctic region. The La Grande watershed is composed of moderately dense to opened black spruce forests, opened areas, burned areas and peat bogs. Over two years (1994-1995), six field campaigns were carried out on a study site located between the LG4 and Laforge1 reservoir, in the center of the La Grande river watershed. The field measurements were of two types: 20 snow lines (depth, snow water equivalent (SWE), density) and 8 snow profiles (depth, density, grain size, temperature, dielectric constant). With these data, the thermal resistance of the snowpack was calculated for every test-site, using the depth, density and thermal conductivity of each layer. Concurrently, more than 10 SAR images (European Satellite ERS-1) of the study site were acquired, calibrated and georeferenced. The backscattering coefficients of all winter images were extracted. Using a reference image (snow-free), backscattering ratios were calculated. They are the difference between a winter image and a snow-free image. This process is used to reduce the impact of vegetation and topography. Then, the relationship between the backscattering ratios and the snowpack thermal resistance of february and march 1994 are established, as the first part of an algorithm developed to estimate the snow water equivalent. The second part of the algorithm infers the snowpack water equivalent from its thermal resistance and density, based on the physical relationship established with field data. This approach is based on studies conducted by INRS-Eau in a southern Quebec agricultural area (BERNIER and FORTIN (1998)). The hypothesis are based on the following: - The snowpack characteristics influence the underlying soil temperature;- The dielectric constant of the soil varies with the soil temperature under 0°C;- The radar signal is influenced by the soil dielectric constant;- Thus, the snowpack characteristics (thermal resistance) influence the radar signal. However, due to variations of soil humidity on the date of the reference image (september 1994), two slightly different relationships were obtained. One for open areas and open forests and one for burned areas and peat bogs. This shows the importance of using a good reference image, with homogeneous soil conditions. It could be better to obtain an image later in the fall, when the soil is frozen. The relationships established here are preliminary, as they use a small dataset. It is estimated that a better regression should be obtained with the acquisition of more images and with a greater range of snow characteristics. However, the algorithm is applied to test the applicability of the method. First, the algorithm was applied on the test-sites, using the images from February and March of 1994 and 1995. The mean error on the estimation of the snow water equivalent is 2% to 3% ( 5 to 7mm), with a deviation of 14% to 19% ( 35 to 45mm). The results are comparable for both years, even if the algorithm is based on 1994 data only. Secondly, the algorithm is applied on the whole images. A classification of a Landsat-TM image is used to identify the land cover of every pixel, which determines the regression and the snow density to be used in the algorithm. Four maps of the SWE are produced and resampled to a resolution of 500m. These are compared with the field measurements from the four nearest Hydro-Quebec snow survey sites. The SWE measured by Hydro-Quebec are all within the most dominant SWE class of each map. Further validation of the results will be possible when the algorithm can be applied on a sub-watershed, which is the actual scale used by Hydro-Quebec. However, the results of this study were sufficiently promising to Hydro-Quebec to support a follow up research with data from the canadian satellite RADARSAT (operational since april 1996). Meanwhile, to improve the algorithm, it is important to obtain a good and homogeneous reference image, to better assess the impact of the land cover and to acquire a dataset with a greater range of snow characteristics

All-Optical Switching with Transverse Optical Patterns

We demonstrate an all-optical switch that operates at ultra-low-light levels and exhibits several features necessary for use in optical switching networks. An input switching beam, wavelength $\lambda$, with an energy density of $10^{-2}$ photons per optical cross section [$\sigma=\lambda^2/(2\pi)$] changes the orientation of a two-spot pattern generated via parametric instability in warm rubidium vapor. The instability is induced with less than 1 mW of total pump power and generates several $\mu$Ws of output light. The switch is cascadable: the device output is capable of driving multiple inputs, and exhibits transistor-like signal-level restoration with both saturated and intermediate response regimes. Additionally, the system requires an input power proportional to the inverse of the response time, which suggests thermal dissipation does not necessarily limit the practicality of optical logic devices

Decoupling of Heavy Kaluza-Klein Modes In Models With Five-Dimensional Scalar Fields

We investigate the decoupling of heavy Kaluza-Klein modes in $\phi^{4}$ theory and scalar QED with space-time topology $\mathbb{R}^{3,1} \times S^{1}$. We calculate the effective action due to integrating out heavy KK modes. We construct generalized RGE's for the couplings with respect to the compactification scale $M$. With the solutions to the RGE's we find the $M$-scale dependence of the effective theory due to higher dimensional quantum effects. We find that the heavy modes decouple in $\phi^{4}$ theory, but do not decouple in scalar QED. This is due to the zero mode of the 5-th component $A_{5}$ of the 5-d gauge field. Because $A_{5}$ is a scalar under 4-d Lorentz transformations, there is no gauge symmetry protecting it from getting mass and $A_{5}^{4}$ interaction terms after loop corrections. In light of these unpleasant features, we explore $S^{1}/\mathbb{Z}_{2}$ compactifications, which eliminate $A_{5}$, allowing for the heavy modes to decouple at low energies. We also explore the possibility of decoupling by including higher dimensional operators. It is found that this is possible, but a high degree of fine tuning is required.Comment: 9 pages, no figures; sign error on equations 20, 36, 37; Added additional reference

Tropical and subtropical actinorhizal plants

A maioria dos países tropicais enfrenta dois grandes problemas: o aumento constante da exploração das reservas florestais para extração de madeira ou lenha e a diminuição da fertilidade do solo para produção agrícola. O conceito geral é o de que plantas fixadoras de N2 podem evitar a propalada crise de madeira e alimentos. Juntas com um grande número de leguminosas fixadoras de N2, plantas actinorrízicas podem ter um papel importante na produção de madeira e recuperação de solos. As plantas actinorrízicas compreendem oito famílias de dicotiledôneas, todas elas representadas nos trópicos. Neste trabalho, as mais promissoras plantas actinorrízicas tropicais são brevemente apresentadas e a ênfase é dada principalmente à família Casuarinaceae. Esta família compreende quatro gêneros (Casuarina, Allocasuarina, Gymnostoma e gênero C), com 82 espécies, incluindo muitas árvores que podem produzir madeira de boa qualidade. As estirpes de Frankia que têm sido isoladas das Casuarinaceae crescem lentamente e são capazes de reduzir acetileno in vitro sob ar, o que indica uma capacidade de proteção contra o O2 muito mais eficiente do que no Rhizobium. Apenas as espécies do gênero Casuarina podem ser noduladas pela estirpe ORS 021001, isolada de Casuarina junghuhniana, o que sugere a existência de grupos de inoculação dentro da família Casuarinaceae. A fixação de N2 de Casuarina equisetifolia, crescida em microparcelas de 1 m2, na estação experimental de ORSTM, em Dakar, foi estimada através da comparação do N total em plantas não-inoculadas e plantas inoculadas com a estirpe ORS 021001. Extrapolando para um hectare, a fixação de N2 foi de 131 kg/N em um período de 6,5 meses. Usando o método de equivalência com adubo nitrogenado, a inoculação parece ser equivalente à aplicação de 288 kg de N/ha-1.Most tropical countries face two major problems: increasing overexploitation of wood reserves for timber or fuel wood and diminishing soil fertility for agricultural production. The present consensus is that N2 -fixing plants can help prevent the forthcoming wood and food crisis. Together with the vast group of N2 -fixing Leguminoseae, actinorhizal plants (AP) can play a major role in wood production and land regeneration. AP comprise eight families of dicotyledonous plants all of which are represented in the tropics. In this paper the most promising tropical AP are briefly presented and the emphasis is put mainly on Casuarinaceae. This family forms a group of four genera (Casuarina, Allocasuarina, Gymnostoma and genus C) with 82 species, including many trees that can yield wood of good quality. The Frankia strains that have been isolated from Casuarinaceae grow slowly and are able to reduce acetylene in vitro under air, which indicates that the protection against O2 is much more efficient in Frankia than in rhizobia. Only the species belonging to the Casuarina genus could be nodulated by strain ORS 021001, isolated from Casuarina junghuhniana, suggesting the existence of crossinoculation groups within the family Casuarinaceae. N2 fixation of Casuarina equisetifolia, grown in 1 m2 microplots at the ORSTOM experimental station of Dakar, was estimated by comparing total N in non-inoculated plants and plants inoculated with Frankia strain ORS 021001. Extrapolating to 1 hectare, N2 fixation was 131 kg for a 6.5-month period. Using the N fertilizer equivalence method, inoculation appeared to be equivalent to the application of 288 kg of N fertilizer per hectare

Sub-natural linewidth in room-temperature Rb vapor using a control laser

We demonstrate two ways of obtaining sub-natural linewidth for probe absorption through room-temperature Rb vapor. Both techniques use a control laser that drives the transition from a different ground state. The coherent drive splits the excited state into two dressed states (Autler-Townes doublet), which have asymmetric linewidths when the control laser is detuned from resonance. In the first technique, the laser has a large detuning of 1.18 GHz to reduce the linewidth to 5.1 MHz from the Doppler width of 560 MHz. In the second technique, we use a counter-propagating pump beam to eliminate the first-order Doppler effect. The unperturbed probe linewidth is about 13 MHz, which is reduced below 3 MHz (0.5 \Gamma) at a detuning of 11.5 MHz.Comment: 4 pages, 7 figure

An effective strain of Frankia from Casuarina.

. . An effective strain of Frankia from Casuarina sp. Can. J. Bot. 61: A strain of Frankia, designated Cjl-82, from root nodules of a hybrid of Casuarina junghuhniana and C . equisetifolia has been isolated in pure culture. When grown under standard culture conditions, Cj 1-82 exhibited the following characteristics: cushionlike colonies with short, wide hyphae and, in addition to typical sporangia, intercalary elongated sporangialike structures (SLS) which could be disrupted into sporelike units. No vesicles were found. When inoculated into the rhizosphere of C. equisetifolia, Cj 1-82 produced vesicles. Reinfection of seedlings of C. equisetifolia was achieved repeatedly with inocula prepared from a suspension of Cjl-82. Sequences of infection of root hairs were described, Fourteen days after inoculation, nodules were apparent on the roots. Nodules were shown to be effective in nitrogen fixation as assessed by the 2815-2821.