250 research outputs found
Atomic Hydrogen Cleaning of Polarized GaAs Photocathodes
Atomic hydrogen cleaning followed by heat cleaning at 450C was used
to prepare negative-electron-affinity GaAs photocathodes. When hydrogen ions
were eliminated, quantum efficiencies of 15% were obtained for bulk GaAs
cathodes, higher than the results obtained using conventional 600C heat
cleaning. The low-temperature cleaning technique was successfully applied to
thin, strained GaAs cathodes used for producing highly polarized electrons. No
depolarization was observed even when the optimum cleaning time of about 30
seconds was extended by a factor of 100
Recommended from our members
Next Flu Pandemic: What to Do Until the Vaccine Arrives?
Most scientists consider another influenza pandemic inevitable, but there is little information on how best to protect the public before a vaccine can be made available
Direct inversion of S-P differential arrival-times for Vp/Vs ratio in SE Asia
Open Access via Jisc Wiley agreementPeer reviewedPublisher PD
Polarization instabilities in a two-photon laser
We describe the operating characteristics of a new type of quantum oscillator
that is based on a two-photon stimulated emission process. This two-photon
laser consists of spin-polarized and laser-driven K atoms placed in a
high-finesse transverse-mode-degenerate optical resonator, and produces a beam
with a power of 0.2 W at a wavelength of 770 nm. We observe
complex dynamical instabilities of the state of polarization of the two-photon
laser, which are made possible by the atomic Zeeman degeneracy. We conjecture
that the laser could emit polarization-entangled twin beams if this degeneracy
is lifted.Comment: Accepted by Physical Review Letters. REVTeX 4 pages, 4 EPS figure
Muon Physics: A Pillar of the Standard Model
Since its discovery in the 1930s, the muon has played an important role in
our quest to understand the sub-atomic theory of matter. The muon was the first
second-generation standard-model particle to be discovered, and its decay has
provided information on the (Vector -Axial Vector) structure of the weak
interaction, the strength of the weak interaction, G_F, and the conservation of
lepton number (flavor) in muon decay. The muon's anomalous magnetic moment has
played an important role in restricting theories of physics beyond the standard
standard model, where at present there is a 3.4 standard-deviation difference
between the experiment and standard-model theory. Its capture on the atomic
nucleus has provided valuable information on the modification of the weak
current by the strong interaction which is complementary to that obtained from
nuclear beta decay.Comment: 8 pages, 9 figures. Invited paper for the Journal of Physical Society
in Japan (JPSJ), Special Topics Issue "Frontiers of Elementary Particle
Physics, The Standard Model and beyond
Recommended from our members
The Polarized Electron Source for the International Collider (ILC) Project
ILC project will be the next large high energy physics tool that will use polarized electrons (and positrons). For this machine spin physics will play an important role. The polarized electron source design is based on electron injectors built for the Stanford Linear Collider (polarized) and Tesla Test Facility (un-polarized). The ILC polarized electron source will provide a 5GeV spin polarized electron beam for injection into the ILC damping ring. Although most ILC machine parameters have been achieved by the SLC or TTF source, features of both must be integrated into one design. The bunch train structure presents unique challenges to the source laser drive system. A suitable laser system has not yet been demonstrated and is part of the ongoing R&D program for ILC at SLAC. Furthermore, ILC injector R&D incorporates photocathode development, increasing available polarization, and improving operational properties in gun vacuum systems. Another important area of research and development is advancing the design of DC and RF electron gun technology for polarized sources. This presentation presents the current status of the design and outlines aspects of the relevant R&D program carried out within the ILC community
Critical Review of Theoretical Models for Anomalous Effects (Cold Fusion) in Deuterated Metals
We briefly summarize the reported anomalous effects in deuterated metals at
ambient temperature, commonly known as "Cold Fusion" (CF), with an emphasis on
important experiments as well as the theoretical basis for the opposition to
interpreting them as cold fusion. Then we critically examine more than 25
theoretical models for CF, including unusual nuclear and exotic chemical
hypotheses. We conclude that they do not explain the data.Comment: 51 pages, 4 Figure
Recommended from our members
SLC polarized beam source ultra-high-vacuum design
This paper describes the design of the ultra-high vacuum system for the beam-line from the 160-kV polarized electron gun to the linac injector in the Stanford Linear Collider (SLC). The polarized electron source is a GaAs photocathode, requiring 10{sup {minus}11}-Torr-range pressure for adequate quantum efficiency and longevity. The photo-cathode is illuminated by 3-nsec-long laser pulses. Photo-cathode maintenance and improvements require occasional substitution of guns with rapid restoration of UHV conditions. Differential pumping is crucial since the pressure in the injector is more than 10 times greater than the photocathode can tolerate, and since electron-stimulated gas desorption from beam loss in excess of 0.1% of the 20-nC pulses may poison the photocathode. Our design for the transport line contains a differential pumping region isolated by a pair of valves. Exchange of guns requires venting only this isolated region which can be restored to UHV rapidly by baking. The differential pumping is performed by non-evaporable getters (NEGs) and an ion pump. 3 refs., 3 figs
Recommended from our members
Transport Mechanisms in Polarized Semiconductor Photo cathodes
We investigated the effect of an accelerating field on the spin polarization of photogenerated electrons in a 100nm thick GaAs based photocathode active region. By decreasing the transport time of the electrons and the number of scattering events that cause depolarization, we expected to increase the polarization as was indicated by Monte Carlo simulations of the scattering and transport time statistics of the electrons. A tungsten (W) grid was deposited on the cathode surface to provide a uniform voltage distribution across the cathode surface. The metal grid formed a Schottky contact with the semiconductor surface. The bias voltage was primarily dropped at the metal semiconductor interface region, which is the cathode active region. For positive surface bias, the accelerating voltage not only increased the polarization, but it also enhanced the quantum efficiency of the photocathode. Preliminary results verify the bias effect on both quantum efficiency and polarization by a factor of 1.8 and 1% respectively
- âŠ