The Population of Damped Lyman-alpha and Lyman Limit Systems in the Cold Dark Matter Model

Lyman limit and damped Lyman-alpha absorption systems probe the distribution of collapsed, cold gas at high redshift. Numerical simulations that incorporate gravity and gas dynamics can predict the abundance of such absorbers in cosmological models. We develop a semi-analytical method to correct the numerical predictions for the contribution of unresolved low mass halos, and we apply this method to the Katz et al. (1996) simulation of the standard cold dark matter model ($\Omega=1$, $h=0.5$, $\Omega_b=0.05$, $\sigma_8=0.7$). Using this simulation and higher resolution simulations of individual low mass systems, we determine the relation between a halo's circular velocity $v_c$ and its cross section for producing Lyman limit or damped absorption. We combine this relation with the Press-Schechter formula for the abundance of halos to compute the number of absorbers per unit redshift. The resolution correction increases the predicted abundances by about a factor of two at z=2, 3, and 4, bringing the predicted number of damped absorbers into quite good agreement with observations. Roughly half of the systems reside in halos with circular velocities v_c>100\kms and half in halos with 35\kms. Halos with v_c>150\kms typically harbor two or more systems capable of producing damped absorption. Even with the resolution correction, the predicted abundance of Lyman limit systems is a factor of three below observational estimates, signifying either a failure of standard CDM or a failure of these simulations to resolve the systems responsible for most Lyman limit absorption. By comparing simulations with and without star formation, we find that depletion of the gas supply by star formation affects absorption line statistics at $z>=2$ only for column densities exceeding $N_{HI}=10^{22} cm^{-2}$.Comment: AASlatex, 17 pages w/ 3 embedded ps figures. Submitted to Ap

Testing Cosmological Models Against the Abundance of Damped Lyman-Alpha Absorbers

We calculate the number of damped Lyman-alpha absorbers expected in various popular cosmological models as a function of redshift and compare our predictions with observed abundances. The Press-Schechter formalism is used to obtain the distribution of halos with circular velocity in different cosmologies, and we calibrate the relation between circular velocity and absorption cross-section using detailed gas dynamical simulations of a ``standard'' cold dark matter (CDM) model. Because of this calibration, our approach makes more realistic assumptions about the absorption properties of collapsed objects than previous, analytic calculations of the damped Lyman-alpha abundance. CDM models with Omega_0=1, H_0=50, baryon density Omega_b=0.05, and scale-invariant primeval fluctuations reproduce the observed incidence and redshift evolution of damped Lyman-alpha absorption to within observational uncertainty, for both COBE normalization (sigma_8=1.2) and a lower normalization (sigma_8=0.7) that better matches the observed cluster abundance at z=0. A tilted (n=0.8, sigma_8=0.7) CDM model tends to underproduce absorption, especially at z=4. With COBE normalization, a CDM model with Omega_0=0.4, Omega_{Lambda}=0.6 gives an acceptable fit to the observed absorption; an open CDM model is marginally acceptable if Omega_0 is at least 0.4 and strongly inconsistent with the z=4 data if Omega_0=0.3. Mixed dark matter models tend not to produce sufficient absorption, being roughly comparable to tilted CDM models if Omega_{nu} = 0.2 and failing drastically if Omega_{nu} = 0.3.Comment: AASlatex, 13 pages w/ 2 embedded ps figures. To be published in ApJ, Sept. 1, 199

Structure of the Shroom-Rho Kinase Complex Reveals a Binding Interface with Monomeric Shroom That Regulates Cell Morphology and Stimulates Kinase Activity

Shroom-mediated remodeling of the actomyosin cytoskeleton is a critical driver of cellular shape and tissue morphology that underlies the development of many tissues including the neural tube, eye, intestines, and vasculature. Shroom uses a conserved SD2 domain to direct the subcellular localization of Rho-associated kinase (Rock), which in turn drives changes in the cytoskeleton and cellular morphology through its ability to phosphorylate and activate non-muscle myosin II. Here, we present the structure of the human Shroom-Rock binding module, revealing an unexpected stoichiometry for Shroom in which two Shroom SD2 domains bind independent surfaces on Rock. Mutation of interfacial residues impaired Shroom-Rock binding in vitro and resulted in altered remodeling of the cytoskeleton and loss of Shroom-mediated changes in cellular morphology. Additionally, we provide the first direct evidence that Shroom can function as a Rock activator. These data provide molecular insight into the Shroom-Rock interface and demonstrate that Shroom directly participates in regulating cytoskeletal dynamics, adding to its known role in Rock localization

Simulations of Damped Lyman-Alpha and Lyman Limit Absorbers in Different Cosmologies: Implications for Structure Formation at High Redshift

We use hydrodynamic cosmological simulations to study damped Lyman-alpha (DLA) and Lyman limit (LL) absorption at redshifts z=2-4 in five variants of the cold dark matter scenario. Our standard simulations resolve the formation of dense concentrations of neutral gas in halos with circular velocity v_c roughly 140 km/s for Omega_m=1 and 90 km/s for Omega_m=0.4, at z=2; an additional LCDM simulation resolves halos down to v_c approximately 50 km/s at z=3. We find a clear relation between HI column density and projected distance to the center of the nearest galaxy, with DLA absorption usually confined to galactocentric radii less than 10-15 kpc and LL absorption arising out to projected separations of 30 kpc or more. Detailed examination provides evidence of non-equilibrium effects on absorption cross-section. If we consider only absorption in the halos resolved by our standard simulations, then all five models fall short of reproducing the observed abundance of DLA and LL systems at these redshifts. If we extrapolate to lower halo masses, we find all four models are consistent with the observed abundance of DLA systems if the the extrapolated behavior extends to circular velocities roughly 50-80 km/s, and they may produce too much absorption if the relation continues to 40 km/s. Our results suggest that LL absorption is closely akin to DLA absorption, arising in less massive halos or at larger galactocentric radii but not caused by processes acting on a radically different mass scale.Comment: 33 pages with 10 embedded EPS figures. Substantially revised and updated from original version. Includes new high-resolution simulations. Accepted for publication in the Ap

Metal Enrichment of the Intergalactic Medium in Cosmological Simulations

Observations have established that the diffuse intergalactic medium (IGM) at z ~ 3 is enriched to ~0.1-1% solar metallicity and that the hot gas in large clusters of galaxies (ICM) is enriched to 1/3-1/2 solar metallicity at z=0. Metals in the IGM may have been removed from galaxies (in which they presumably form) during dynamical encounters between galaxies, by ram-pressure stripping, by supernova-driven winds, or as radiation-pressure driven dust efflux. This study develops a method of investigating the chemical enrichment of the IGM and of galaxies, using already completed cosmological simulations. To these simulations, we add dust and (gaseous) metals, distributing the dust and metals in the gas according to three simple parameterized prescriptions, one for each enrichment mechanism. These prescriptions are formulated to capture the basic ejection physics, and calibrated when possible with empirical data. Our results indicate that dynamical removal of metals from >~ 3*10^8 solar mass galaxies cannot account for the observed metallicity of low-column density Ly-alpha absorbers, and that dynamical removal from >~ 3*10^10 solar mass galaxies cannot account for the ICM metallicities. Dynamical removal also fails to produce a strong enough mass-metallicity relation in galaxies. In contrast, either wind or radiation-pressure ejection of metals from relatively large galaxies can plausibly account for all three sets of observations (though it is unclear whether metals can be distributed uniformly enough in the low-density regions without overly disturbing the IGM, and whether clusters can be enriched quite as much as observed). We investigate in detail how our results change with variations in our assumed parameters, and how results for the different ejection processes compare. (Abridged)Comment: Minor revision, 1 figure added addressing diffusion of metals after their ejection. Accepted by ApJ. 31 EmulateApj Pages with 13 embedded postscript figure

Creative teaching and learning: towards a common discourse and practice

There has recently been a call for more pedagogic comparative research to counter the dominance of structural and policy led studies. At the same time there is also a necessity to provide alternative comparative research to that concerned with global standardising performance and performativity strategies. The research, on which this paper is based, fulfils both these aims by investigating creative teaching and learning in nine European countries at classroom level using ethnographic methods in a small number of sites for each partner. The research partners share a common discourse of pedagogy that we are calling creative teaching and learning, a common humanitarian discourse and the ethnographic methodology for the research was a strong framework to counter differing cultural approaches to research. The article analytically characterises some significant strategies used by teachers, the creative learning experienced and the meaning that the experiences had for the students involved. We conclude that this research has laid the basis for a common discourse for further research in a comparative approach that will investigate commonalities to build an understanding of international creative pedagogy and investigate differences to enhance the conceptualisation of it

Measuring the Halo Mass of z=3 Damped Ly-alpha Absorbers from the Absorber-Galaxy Cross-correlation

[Abridged] We test the reliability of a method to measure the mean halo mass of Damped Ly-alpha absorbers (DLAs). The method is based on measuring the ratio of the cross-correlation between DLAs and galaxies to the auto-correlation of the galaxies themselves ($w_{\rm dg}/w_{\rm gg}$), which is (in linear theory) the ratio of their bias factor. This is shown to be true irrespective of the galaxy redshift distribution, provided that one uses the same galaxies for the two correlation functions. The method is applicable to all redshifts. Here, we focus on z=3 DLAs and we demonstrate that the method robustly constrains the mean DLA halo mass using smoothed particle hydrodynamics (SPH) cosmological simulations. If we use the bias formalism of Mo & White with the DLA and galaxy mass distributions of these simulations, we predict a bias ratio of 0.771. Direct measurement from the simulations of $w_{\rm dg}/w_{\rm gg}$ st yields a ratio of 0.73+/-0.08, in excellent agreement with that prediction. Equivalently, inverting the measured correlation ratio to infer a mean DLA halo mass yields (log. averaging, in solar units) =11.13+/-013, in excellent agreement with the true value in the simulations: 11.16. The cross- correlation method thus appears to yield a robust estimate of the average host halo mass even though the DLAs and the galaxies occupy a broad mass spectrum of halos, and massive halos contain multiple galaxies with DLAs. We show that the inferred mean DLA halo mass is independent of the galaxy sub-sample used, i.e. the cross-correlation technique is also reliable. Our results imply that the cross-correlation length between DLAs and LBGs is predicted to be, at most, 2.85 Mpc. Future observations will soon distinguish models in which DLAs are in low mass halos from those in which DLAs are in massive halos.Comment: 15 pages, 7 figures, to be published in ApJ 2005 July 20th (Full resolution of Fig.2 at http://www.mpe.mpg.de/~nbouche/papers/Xcorr/f2-orig.eps); minor changes to match the published tex

SHARC II: a Caltech Submillimeter Observatory facility camera with 384 pixels

SHARC II is a background-limited 350 μm and 450 μm facility camera for the Caltech Submillimeter Observatory undergoing commissioning in 2002. The key component of SHARC II is a 12×32 array of doped silicon 'pop-up' bolometers developed at NASA/Goddard. Each 1 mm × 1 mm pixel is coated with a 400 Ω/square bismuth film and located λ/4 above a reflective backshort to achieve >75% absorption efficiency. The pixels cover the focal plane with >90% filling factor. At 350 μm, the SHARC II pixels are separated by 0.65 λ/D. In contrast to the silicon bolometers in the predecessor of SHARC II, each doped thermistor occupies nearly the full area of the pixel, which lowers the 1/f knee of the detector noise to <0.03 Hz, under load, at the bath temperature of 0.36 K. The bolometers are AC-biased and read in 'total power' mode to take advantage of the improved stability. Each bolometer is biased through a custom ~130 MΩ CrSi load resistor at 7 K and read with a commercial JFET at 120 K. The JFETs and load resistors are integrated with the detectors into a single assembly to minimize microphonic noise. Electrical connection across the 0.36 K to 4 K and 4 K to 120 K temperature interfaces is accomplished with lithographed metal wires on dielectric substrates. In the best 25% of winter nights on Mauna Kea, SHARC II is expected to have an NEFD at 350 μm of 1 Jy Hz-1/2 or better. The new camera should be at least 4 times faster at detecting known point sources and 30 times faster at mapping large areas compared to the prior instrument