La Región de Murcia y sus aguas : unidad didáctica de Educación Secundaria Obligaroria

Primer Premio a la 1ª edición de premios a la elaboración de materiales de estudio sobre la Región de Murcia, modalidad Educación Secundaria Obligatori

Esterification of Free Fatty Acids with Glycerol within the Biodiesel Production Framework

Companies in the field of the collection and treatment of waste cooking oils (WCO) for subsequent biodiesel production usually have to cope with high acidity oils, which cannot be directly transformed into fatty acid methyl esters due to soap production. Since glycerine is the main byproduct of biodiesel production, these high acidity oils could be esterified with the glycerine surplus to transform the free fatty acids (FFA) into triglycerides before performing the transesterification. In this work, commercial glycerol was esterified with commercial fatty acids and commercial fatty acid/lampante olive oil mixtures over tin (II) chloride. In the first set of experiments, the esterification of linoleic acid with glycerol excess from 20 to 80% molar over the stoichiometric was performed. From 20% glycerol excess, there was no improvement in FFA reduction. Using 20% glycerol excess, the performance of a biochar obtained from heavy metal-contaminated plant roots was compared to that of SnCl2. Then, the effect of the initial FFA content was assessed using different oleic acid/lampante olive oil mixtures. The results illustrated that glycerolysis was impeded at initial FFA contents lower than 10%. Finally, the glycerolysis of a WCO with 9.94% FFA was assayed, without success

Phytoremediation of highly contaminated mining soils by Jatropha curcas L. and production of catalytic carbons from the generated biomass

This paper deals with the removal of heavy metals from marginal soil mixtures from the Cobre Las Cruces and Aznalcóllar mining areas containing high concentrations of metals (Cr, Fe, Ni, Cu, Zn, Cd, Hg, Pb and As) by means of phytoremediation using Jatropha curcas L., and the subsequent production of biocatalysts from the plant biomass. First, J. curcas L. was sowed in eight mixtures of these mining soils to study its adaption to these high-contaminated soils and its growth during 60 days in a greenhouse under conditions simulating the South of Spain's spring climate. Later, the most suitable soil mixtures for plant growth were used for 120-day phytoremediation under the same conditions. Heavy metal concentration in soils, roots, stems and leaves were measured by ICP-OES at the beginning, at the middle and at the end of the phytoremediation period, thus calculating the translocation and bioaccumulation factors. J. curcas L. was found to absorb great amounts of Fe (> 3000 mg kg−1 plant) as well as notable amounts of Pb, Zn, Cu, Cr and Ni, and traces of As. Other metals with lower initial concentrations such as Cd, Hg and Sn were completely removed from soils. Finally, the plant biomass was subjected to pyrolysis to obtain catalytic biocarbons, assessing the optimal temperature for the pyrolytic process by means of thermogravimetric analysis and Raman spectroscopy

Determination of the Composition of Bio-Oils from the Pyrolysis of Orange Waste and Orange Pruning and Use of Biochars for the Removal of Sulphur from Waste Cooking Oils

Waste generated in the agri-food sector is a potential source of biomass and other products of high added value. In this work, the pyrolysis of orange waste and orange pruning was carried out to produce adsorbent biochars and characterise the bio-oils aiming for high-added-value compounds. Pyrolysis was carried out in a vertical tubular furnace on the laboratory scale modifying the temperature (400–600 °C), the heating ramp (5–20 °C·min−1) to reach the previous temperature and the inert gas flow rate (30–300 mL Ar·min−1) throughout the furnace. The most suitable conditions for obtaining biochar were found to be 400 °C, 5 °C·min−1, and 150 mL Ar·min−1 for orange waste, and 400 °C, 10 °C·min−1, and 150 mL Ar·min−1 for orange pruning. Thermogravimetric analysis showed higher thermal stability for orange pruning due to its higher lignin content (20% vs. 5% wt. on a wet basis). The bio-oil composition was determined by GC-MS. Toluene and 5-hydroxymethylfurfural were the main compounds found in orange waste bio-oils, while orange pruning bio-oils were composed mainly of 4-hydroxy-4-methyl-2-pentanone. Finally, the removal of the sulphur content from waste cooking oil was assayed with the biochars from both orange waste and orange pruning, whose BET surface areas were previously determined. Despite their low specific surface areas (≤1 m2·g−1 for orange waste biochars and up to 24.3 m2·g−1 for orange pruning biochars), these biochars achieved a reduction of the initial sulphur content of the waste cooking oil between 66.4% and 78.8%.European Union under the LIFE 13 BIOSEVILLE Programme ENV/ES/1113 (analysis, materials and salaries)European Regional Development Fund (ERDF) through the CARBOENERGY project (materials and salaries) granted by the FEDER INNTERCONECT

Production of Oxygenated Fuel Additives from Residual Glycerine Using Biocatalysts Obtained from Heavy-Metal-Contaminated Jatropha curcas L. Roots

This work aims to shed light on the use of two biochars, obtained from the pyrolysis at 550 C of heavy-metal-contaminated Jatropha curcas L. roots, as heterogeneous catalysts for glycerol esterification using residual glycerine. To do this, glycerine from biodiesel production was purified. In a first step, H3PO4 or H2SO4 was used to remove non-glycerol organic matter. The glycerol-rich phase was then extracted with ethanol or propanol, which increased the glycerol content from 43.2% to up to 100%. Subsequently, the esterification of both purified glycerine and commercial USP glycerine was assayed with acetic acid (AA) or with acetic anhydride (AH) at 9:1 molar ratio to glycerol using Amberlyst-15 as catalyst. Different reaction times (from 1.5 to 3 h) and temperatures (100–115 C when using AA and 80–135 C when using AH) were assessed. Results revealed that the most suitable conditions were 80 C and 1.5 h reaction time using AH, achieving 100% yield and selectivity towards triacetylglycerol (TAG) almost with both glycerines. Finally, the performance and reuse of the two heterogeneous biocatalysts was assessed. Under these conditions, one of the biocatalysts also achieved 100% TAG yield.VI Plan Propio de Investigación y Transferencia of University of Seville grant VIPPIT-2019-I.

Metal Accumulation by Jatropha curcas L. Adult Plants Grown on Heavy Metal-Contaminated Soil

Jatropha curcas has the ability to phytoextract high amounts of heavy metals during its first months just after seeding. Notwithstanding, there is scarce information about metal uptake by adult J. curcas plants. To shed light on this issue, 4-year-old J. curcas L. plants were planted in a soil mixture of peat moss and mining soil (high metals content), and the biomass growth and metal absorption during 90 days were compared with those of plants growing in peat moss. The main metal found in the mining soil was Fe (31985 mg kg-1) along with high amounts of As (23717 mg kg-1). After the 90-day phytoremediation, the plant removed 29% of Fe and 44% of As from the soil mixture. Results revealed that J. curcas L. translocated high amounts of metals to its aerial parts, so that translocation factors were much higher than 1. Because of the high translocation and bioaccumulation factors obtained, J. curcas L. can be regarded as a hyperaccumulator plant. Despite the great capacity of J. curcas L. to phytoremediate heavy-metal-contaminated soils, the main drawback is the subsequent handling of the metal-contaminated biomass, although some potential applications have been recently highlighted for this biomass.University of Seville (VIPPIT-2019-I.5

Production of Bio-Oils and Biochars from Olive Stones: Application of Biochars to the Esterification of Oleic Acid

Olive stones are a by-product of the olive oil industry. In this work, the valorisation of olive stones through pyrolysis was attempted. Before pyrolysis, half of the samples were impregnated with sulphuric acid. Pyrolysis was carried out in a vertical tubular furnace with a ceramic support. The pyrolysis conditions assayed were: temperature between 400 and 600 °C, heating ramp between 5 and 20 °C∙min−1, and inert gas flow rate between 50 and 300 mL Ar∙min−1. Among them, temperature was the only parameter that influenced the pyrolysis product distribution. The most suitable temperature for obtaining biochar was 400 °C for both non-treated and pre-treated raw material, while for obtaining bio-oil, it was 600 °C for impregnated olive stones and 400 °C for the raw material. The impregnated olives stones led to bio-oils with much higher amounts of high-added-value products such as levoglucosenone and catechol. Finally, the biochars were impregnated with sulphuric acid and assayed as biocatalysts for the esterification of oleic acid with methanol in a stirred tank batch reactor at 60 °C for 30 min. Biochars from non-treated olive stones, which had lower specific surfaces, led to higher esterification yields (up to 96.2%).European Union under grant LIFE 13-Bioseville ENV/1113FEDER funds through the CARBOENERGY project FEDER INNTERCONECTA 2018 cal

Energetic Valorisation of Olive Biomass: Olive-Tree Pruning, Olive Stones and Pomaces

Olive oil industry is one of the most important industries in the world. Currently, the land devoted to olive-tree cultivation around the world is ca. 11 106 ha, which produces more than 20 106 t olives per year. Most of these olives are destined to the production of olive oils. The main by-products of the olive oil industry are olive-pruning debris, olive stones and di erent pomaces. In cultures with traditional and intensive typologies, one single ha of olive grove annually generates more than 5 t of these by-products. The disposal of these by-products in the field can led to environmental problems. Notwithstanding, these by-products (biomasses) have a huge potential as source of energy. The objective of this paper is to comprehensively review the latest advances focused on energy production from olive-pruning debris, olive stones and pomaces, including processes such as combustion, gasification and pyrolysis, and the production of biofuels such as bioethanol and biodiesel. Future research e orts required for biofuel production are also discussed. The future of the olive oil industry must move towards a greater interrelation between olive oil production, conservation of the environment and energy generation

Identification of Copper in Stems and Roots of Jatropha curcas L. by Hyperspectral Imaging

The in situ determination of metals in plants used for phytoremediation is still a challenge that must be overcome to control the plant stress over time due to metals uptake as well as to quantify the concentration of these metals in the biomass for further potential applications. In this exploratory study, we acquired hyperspectral images in the visible/near infrared regions of dried and ground stems and roots of Jatropha curcas L. to which different amounts of copper (Cu) were added. The spectral information was extracted from the images to build classification models based on the concentration of Cu. Optimum wavelengths were selected from the peaks and valleys showed in the loadings plots resulting from principal component analysis, thus reducing the number of spectral variables. Linear discriminant analysis was subsequently performed using these optimum wavelengths. It was possible to differentiate samples without addition of copper from samples with low (0.5–1% wt.) and high (5% wt.) amounts of copper (83.93% accuracy, >0.70 sensitivity and specificity). This technique could be used after enhancing prediction models with a higher amount of samples and after determining the potential interference of other compounds present in plants.University of Seville VIPPIT-2019-I.5University of Seville VIPPIT-2019-I.

Proteomic Applications in the Study of Human Mesenchymal Stem Cells

Mesenchymal stem cells (MSCs) are undifferentiated cells with an unlimited capacity for self-renewal and able to differentiate towards specific lineages under appropriate conditions. MSCs are, a priori, a good target for cell therapy and clinical trials as an alternative to embryonic stem cells, avoiding ethical problems and the chance for malignant transformation in the host. However, regarding MSCs, several biological implications must be solved before their application in cell therapy, such as safe ex vivo expansion and manipulation to obtain an extensive cell quantity amplification number for use in the host without risk accumulation of genetic and epigenetic abnormalities. Cell surface markers for direct characterization of MSCs remain unknown, and the precise molecular mechanisms whereby growth factors stimulate their differentiation are still missing. In the last decade, quantitative proteomics has emerged as a promising set of techniques to address these questions, the answers to which will determine whether MSCs retain their potential for use in cell therapy. Proteomics provides tools to globally analyze cellular activity at the protein level. This proteomic profiling allows the elucidation of connections between broad cellular pathways and molecules that were previously impossible to determine using only traditional biochemical analysis. However; thus far, the results obtained must be orthogonally validated with other approaches. This review will focus on how these techniques have been applied in the evaluation of MSCs for their future applications in safe therapies.Instituto de Salud Carlos III; PI11/0279