Frequency-noise measurements of optical frequency combs by multiple fringe-side discriminator

open5noThe frequency noise of an optical frequency comb is routinely measured through the hetherodyne beat of one comb tooth against a stable continuous-wave laser. After frequency-to-voltage conversion, the beatnote is sent to a spectrum analyzer to retrive the power spectral density of the frequency noise. Because narrow-linewidth continuous-wave lasers are available only at certain wavelengths, heterodyning the comb tooth can be challenging. We present a new technique for direct characterization of the frequency noise of an optical frequency comb, requiring no supplementary reference lasers and easily applicable in all spectral regions from the terahertz to the ultraviolet. The technique is based on the combination of a low finesse Fabry-Perot resonator and the so-called "fringe-side locking" method, usually adopted to characterize the spectral purity of single-frequency lasers, here generalized to optical frequency combs. The effectiveness of this technique is demonstrated with an Er-fiber comb source across the wavelength range from 1 to 2 μm.Coluccelli, Nicola; Cassinerio, Marco; Gambetta, Alessio; Laporta, Paolo; Galzerano, GianlucaColuccelli, Nicola; Cassinerio, Marco; Gambetta, Alessio; Laporta, Paolo; Galzerano, Gianluc

Low frequency-to-intensity noise conversion in a pulsed laser cavity locking by exploiting carrier envelope offset

We report on the dependence of the frequency-to-intensity noise conversion in the locking of an ultrafast laser against a high-finesse optical enhancement resonator from the carrier envelope offset frequency. By a proper combination of the cavity finesse and laser carrier envelope offset frequency, it is possible to optimize the signal-to-noise ratio of the laser intensity trapped into the optical resonator. In this paper, we describe the effect of the laser-enhancement cavity coupling on the intracavity power relative noise, and we demonstrate both theoretically and experimentally its reduction

The optical frequency comb fibre spectrometer

Optical frequency comb sources provide thousands of precise and accurate optical lines in a single device enabling the broadband and high-speed detection required in many applications. A main challenge is to parallelize the detection over the widest possible band while bringing the resolution to the single comb-line level. Here we propose a solution based on the combination of a frequency comb source and a fibre spectrometer, exploiting all-fibre technology. Our system allows for simultaneous measurement of 500 isolated comb lines over a span of 0.12 THz in a single acquisition; arbitrarily larger span are demonstrated (3,500 comb lines over 0.85 THz) by doing sequential acquisitions. The potential for precision measurements is proved by spectroscopy of acetylene at 1.53 μm. Being based on all-fibre technology, our system is inherently low-cost, lightweight and may lead to the development of a new class of broadband high-resolution spectrometers

47-fs Kerr-lens mode-locked Cr:ZnSe laser with high spectral purity

We report on a room-temperature Kerr-lens mode-locked Cr:ZnSe femtosecond laser operating at around 2.4 µm emission wavelength. Self-starting nearly transform-limited pulse trains with a minimum duration of 47 fs, corresponding to six optical cycles, and average output power of 0.25 W are obtained with repetition frequencies in the range from 140 to 300 MHz. The femtosecond pulse train is characterized by high-spectral purity and low time jitter

Diode-pumped passively mode-locked Yb:YLF laser.

We demonstrate passive mode-locking by means of a semiconductor saturable-absorber mirror in a diode-pumped Yb:YLF laser. We present crystal growth process, spectroscopic measurements, and investigation of mode-locking performance. Pulse trains with minimum duration of 196 fs, average power of 54 mW and a repetition rate of 55 MHz were obtained. The optical spectrum, centered at 1028 nm, has a 7.1-nm bandwidth leading to nearly transform-limited pulses. (C) 2008 Optical Society of America

Versatile OSCAT time-domain THz spectrometer

: We report on a compact and versatile time-domain spectrometer operating in the THz spectral region from 0.2 to 2.5 THz based on ultrafast Yb:CALGO laser and photo-conductive antennas. The spectrometer operates with the optical sampling by cavity tuning (OSCAT) method based on laser repetition rate tuning, which allows at the same time the implementation of a delay-time modulation scheme. The whole characterization of the instrument is presented and compared to the classical THz time-domain spectroscopy implementation. THz spectroscopic measurements on a 520-μm thick GaAs wafer substrate together with water vapor absorption measurements are also reported to further validate the instrument capabilities

Cavity-ring-down Doppler-broadening primary thermometry

A step forward in Doppler-broadening thermometry is demonstrated using a comb-assisted cavity-ring-down spectroscopic approach applied to an isolated near-infrared line of carbon dioxide at thermodynamic equilibrium. Specifically, the line-shape of the Pe(12) line of the (30012)â\u86\u90(00001) band of CO2 at 1.578 μm is accurately measured and its Doppler width extracted from a refined multispectrum fitting procedure accounting for the speed dependence of the relaxation rates, which were found to play a role even at the very low pressures explored, from 1 to 7 Pa. The thermodynamic gas temperature is retrieved with relative uncertainties of 8Ã\u9710-6 (type A) and 11Ã\u9710-6 (type B), which ranks the system at the first place among optical methods. Thanks to a measurement time of only â\u89\u885h, the technique represents a promising pathway toward the optical determination of the thermodynamic temperature with a global uncertainty at the 10-6 level

Standoff detection of bacterial spores by field deployable coherent Raman spectroscopy

: Vibrational spectroscopies offer great potential for standoff detection of chemical and biological warfare agents, avoiding contamination to the operator and equipment. Among them, particularly promising is Coherent anti-Stokes Raman scattering (CARS) spectroscopy, using synchronized pump/Stokes laser pulses to set up a vibrational coherence of target molecules at a laser focus, which is read by further interaction with a probe pulse, resulting in the emission of a coherent beam detectable at a distance. CARS has previously demonstrated the capability to detect bacterial spores based on the Raman spectrum of the characteristic molecule calcium dipicolinate (CaDPA); however, a complex and bulky laser technology, which is only suitable for a laboratory environment, was employed. Here we develop a broadband CARS setup based on a compact, industrial grade ytterbium laser system. We demonstrate high signal-to-noise ratio detection of Bacillus atrophaeus spores at a concentration of 105 cfu/mm2, at a standoff distance of 1 m, and an acquisition time of 1 s. Our system, which combines chemical specificity and sensitivity along with improved ruggedness and portability, paves the way to a new generation of instruments for real-world standoff detection of chemical and biological threats