An epidemiological Study of Domestic Violence Against Women and its Association with Sexually Transmitted Infections in Bangalore Rural.

Background: Gender-based violence is universal, differing only in scope from one society to the other. The most common form of violence against women is domestic violence or violence within families. Objectives: 1. To study the prevalence and different forms of domestic violence perpetrated by intimate partner against married women. 2. To study socio economic and demographic factors which affect the victimization of woman for domestic violence. 3.To study prevalence of sexually transmitted infection and its association with domestic violence in the study group. Methods: Based on a pilot study results, a sample size of 257 was determined. Total 257 currently married women in the reproductive age group (15-49 yrs) were interviewed by systematic random sampling with prior consent using a well designed, pre- tested questionnaire . All the women were screened for sexually transmitted infections as per the WHO guidelines by syndromic approach. The data was analyzed by percentages and chi-square test. Results: Prevalence of domestic violence was found to be 29.57% in the study group. Verbal abuse was reported by 81.58% of the women, Physical abuse by 31.58% of the women ,Psychological abuse by 27.63% of the women and Sexual abuse by 10.53% of the women. Among the 76 victimized women none of them reported to the police. Interpretation and conclusions: The vulnerability to domestic violence was found significantly associated with age at marriage, duration of marriage and addiction of husband to alcohol. The association between domestic violence and sexually transmitted infections was also found significant

Chemically Deposited Optical Fiber Humidity Sensor

Humidity measurement in industries is a critical factor, since it may affect the business cost of the product, end product quality, optimal functioning of equipment, and the health and safety of the personnel. Hence, humidity sensing is becoming very important, especially in the control systems for industrial processes. Since humidity is expressed in different ways, it is very difficult to come up with a reliable, consistent, and repeatable humidity measurement approach. In contrast to other sensors employed for measuring other parameters like temperature and pressure, a humidity sensor has to be in contact with the process environment and hence is difficult to implement. This research was initiated at the Diagnostic Instrumentation and Analysis Laboratory (DIAL) for the requirement from the DOE to monitor the moisture in the soil at the nuclear waste storage facility. The idea was to monitor the leakage, if any, in the storage cylinders to avoid any hazard that may come up. The humidity sensor in this case had to be able to transmit the measurement over a distance far away from the actual measurement site. Keeping all these factors in mind, a chemically deposited optical fiber humidity sensor was developed. It was based on the evanescent tail absorption of light passing through an optical fiber due to hygroscopic material deposited on it. The hygroscopic material used was an aqueous solution of Poly-vinyl-acetate (PVA) and Cobalt Chloride (COCl2). The sensor yielded a consistent humidity measurement from 75% to 95%. Based on the above research, research is currently in progress to bring up a commercial prototype of the sensor

Speech Recognition Writing Robotic Arm

Robotics is a key technology in the modern world. Robots are a well-established part of manufacturing and warehouse automation, assembling cars or washing machines, and, for example, moving goods to and from storage racks for Internet mail order. More recently robots have taken their first steps into homes and hospitals, and seen spectacular success in planetary exploration. Yet, despite these successes, robots have failed to live up to the predictions of the 1950s and 60s, when it was widely thought - by scientists and engineers as well as the public - that by turn of the 21st century we would have intelligent robots as butlers, companions, or co-workers. Robotics is the branch of mechanical engineering, electrical engineering and computer science that deals with the design, construction, operation, and application of robots, as well as computer systems for their control, sensory feedback, and information processing. DOI: 10.17762/ijritcc2321-8169.15062

ELECTRICAL CONDUCTION, dielectric BEHAVIOR AND MAGNETOELECTRIC EFFECT IN (1-x) Co1.2Mn0.2Fe1.6O4 + (x) BaTiO3 ME Composites

Objective: Electrical and magnetoelectric properties of magnetoelectric (ME) composites ferroelectric as electric component and a mixed ferrite as magnetic component are reported. The (1-x) Co1.2Mn0.2Fe1.6O4 + (x) BaTiO3 magnetoelectric (ME) composite have been prepared using conventional double sintering ceramic process where x varies as 0.00, 0.25, 0.50, 0.75 and 1.00. The X-ray diffraction pattern of the composites reveals the formation of spinel structure for the piezomagnatic phase and tetragonal perovskite structure for the piezoelectric phase without any other phase formation. The dc resistivity was measured as a function of temperature. The variation of dielectric constant ' dielectric loss ε'' and dielectric loss tangent δ with frequency in the range 1kHz-1MHz was studied. The dielectric constant shows dispersion in the lower frequency region, with almost a constant value at higher frequencies. The magnetoelectric voltage coefficient (dE/dH)H was studied as a function of intensity of the magnetic field. The measured magnetoelectric (ME) response demonstrated strong dependence on the volume fraction of CoMnFe2O4 and the applied magnetic field. A large ME voltage coefficient of about 647 Vcm-1Oe-1 was observed for 25% CoMnFe2O4 + 75% BaTiO3composite. Materials and Methods: The piezoelectric phase Barium Titanate (BaTiO3) was prepared by standard doubling sintering ceramic method using AR grade oxides/carbonate. Barium carbonate (BaCO3) and Titanium-dioxide (TiO2) were taken in molar proportion. Results: The electrical resistivity of ferrite phase is less as compared to the resistivity of ferroelectric material. The resistivity of composites is found to be in between ferrite and ferroelectric. Conclusion: Magneto-electric conversion factor with varying magnetic field shows maxima in the curve at a lower magnetic field and then decreases continuously at higher magnetic field. As ferroelectric content increases both the resistivity and magnetoelectric conversion factor also increases

An Intelligent Fault Alert Mechanism for Dynamic IoT Communication Microarchitecture

The usage Internet of Things (IoT) was maximized throughout the entire world. Hence, the different core processors incorporated microarchitecture makes this IoT communication system. However, the rise of faults due to the malicious event and the data overload might maximize energy and power utilization. So, the current study has proposed a novel Chimp-based Domain adaptation Alert System (CbDAAS) for the dynamic IoT communication microarchitecture. Before initiating the communication sharing process, the present fault in the designed IoT dynamic core microarchitecture was predicted, and those cores were removed for the current data broadcasting process. Henceforth, the designed fault alert microarchitecture is tested in the MATLAB platform. The reliability was valued using different metrics like power usage, energy consumption and detection exactness value. Finally, the validated metrics were compared with the associated studies and scored the finest outcome in fault detection score as 98% and less energy usage at 0.025mj

Image Denoising Using Digital Image Curvelet

Image reconstruction is one of the most important areas of image processing. As many scientific experiments result in datasets corrupted with noise, either because of the data acquisition process or because of environmental effects, denoising is necessary which a first pre-processing step in analyzing such datasets. There are several different approaches to denoise images. Despite similar visual effects, there are subtle differences between denoising, de-blurring, smoothing and restoration. Although the discrete wavelet transform (DWT) is a powerful tool in image processing, it has three serious disadvantages: shift sensitivity, poor directionality and lack of phase information. To overcome these disadvantages, a method is proposed which is based on Curvelet transforms which has very high degree of directional specificity. Allows the transform to provide approximate shift invariance and directionally selective filters while preserving the usual properties of perfect reconstruction and computational efficiency with good well-balanced frequency responses where as these properties are lacking in the traditional wavelet transform.Curvelet reconstructions exhibit higher perceptual quality than Wavelet based reconstructions, offering visually sharper images and in particular higher quality recovery of edges and of faint linear and curve linear features. The Curvelet reconstruction does not contain the quantity of disturbing artifacts along edges that we see in wavelet reconstruction. Digital Implementations of newly developed multiscale representation systems namely Curvelets, Ridgelet and Contourlets transforms are used for denoising the image. We apply these digital transforms to the problem of restoring an image from noisy data and compare our results with those obtained from well established methods based on the thresholding of Wavelet Coefficients. Keywords: Curvelets Transform, Discrete Wavelet Transform, Ridgelet Transform, Peak signal to Noise Ratio (PSNR), Mean Square Error (MSE)

The Impact of Structural Changes in the Indian Manufacturing Industries: 1980-2013

With regard to the importance of the manufacturing, industrial sector for economic growth and its priority for motivating other sectors to development, the paper is aimed to study the structural changes condition in the Indian manufacturing industries. The changing in value-added of industrial activities due to industrial and economic policies is an important indicator for the recognition of manufacturing industries structure. We have analyzed the industrial structure and competitiveness of each industrial activity by using data value-added of manufacturing industries and common indexes such as the structural changes index in the period of 1980-2013. The results of structural index analysis showed that of textile products; leather; basic chemicals and chemical products in the periods of 1980-98  and also in the periods after 2000industries wearing apparel; dressing and dyeing of fur tanning and dressing of leather ; wood and products of wood; motor vehicles, trailers and semi-trailers; recycling; other transport equipment have been the industrial activities that their structural changes indexes has been positive and they have had the highest competitiveness in comparison to other industrial activities and the greatest opportunities to create value-added.&nbsp

Comparative Advantage in Indian Economy: 1990-2014

The most countries try to improve their advantage towards goods with high range of demand and sustainable trade such as industrial goods and merchandise. India embarked on the path of globalization in the early 1990s with the objective to attain a higher growth profile. This question can be brought up in which goods India has have comparative adventage. The aim of this study is to analyze comparative advantages of Indian's exports commodities during of post liberalsation in 1990-2014. The well-known index for determining trade advantage is revealed comparative advantage (RCA) by Balasa. The findings by India’s RCA in exports showed India has gained comparative advantage in a number of agriculture sector such as Food items, Textiles, Leather and other Manufactures.  &nbsp

A Study of Reproductive Morbidities among Women Reporting to Primary and Tertiary Care Centres in and around Delhi

Purpose: To assess reproductive morbidities among women reporting to a tertiary and a primary health centres in and around Delhi, India. Methods: 581 women (388 were from Safdarjung Hospital and 193 from the Primary Health Centre in Najafgarh) of all age groups who attended the gynecological out-patient departments at both centres were interviewed using a structured questionnaire comprising of questions relating to general socio-demographic information and the reasons for coming to the centre and examined. These were categorized into gynecological, obstetrical or contraceptive after obtaining a detailed history. Results: The frequency of reproductive morbidities in the present study was observed to be quite high with gynecological conditions being the most common (88.64%), followed by obstetric (65.93%) and contraceptive (11.53%) morbidities. Conclusion: Gynaecological conditions were the major reasons while the women visited the healthcare facilities. Early identification of RTIs and other types of morbidities needs to be encouraged through regular check-ups. The antenatal clinics also need to be strengthened in order to ensure better obstetric health care.Keywords: Contraceptive, Gynecology, Morbidity, Obstetrics, RTI