342 research outputs found
Feasibility of generating an artificial burst in a turbulent boundary layer
Artificial bursts were generated in laminar and turbulent boundary layers. The burst-like events were produced by withdrawing near-wall fluid from two minute holes separated in the spanwise direction or by pitching a miniature delta wing that was flush-mounted to the wall. Either of these actions generated streamwise vorticity and a low-speed streak that resembled a naturally occurring one. The resulting sequence of events occurred at a given location and at controlled times, allowing detailed examination and comparison with natural, random bursts by means of flow visualization and fast-response probe measurement techniques
Cavity optomechanics with stoichiometric SiN films
We study high-stress SiN films for reaching the quantum regime with
mesoscopic oscillators connected to a room-temperature thermal bath, for which
there are stringent requirements on the oscillators' quality factors and
frequencies. Our SiN films support mechanical modes with unprecedented products
of mechanical quality factor and frequency reaching Hz. The SiN membranes exhibit a low optical absorption
characterized by Im at 935 nm, representing a 15 times
reduction for SiN membranes. We have developed an apparatus to simultaneously
cool the motion of multiple mechanical modes based on a short, high-finesse
Fabry-Perot cavity and present initial cooling results along with future
possibilities.Comment: 4 pages, 5 figure
The effect of non-uniform damping on flutter in axial flow and energy harvesting strategies
The problem of energy harvesting from flutter instabilities in flexible
slender structures in axial flows is considered. In a recent study, we used a
reduced order theoretical model of such a system to demonstrate the feasibility
for harvesting energy from these structures. Following this preliminary study,
we now consider a continuous fluid-structure system. Energy harvesting is
modelled as strain-based damping and the slender structure under investigation
lies in a moderate fluid loading range, for which {the flexible structure} may
be destabilised by damping. The key goal of this work is to {analyse the effect
of damping distribution and intensity on the amount of energy harvested by the
system}. The numerical results {indeed} suggest that non-uniform damping
distributions may significantly improve the power harvesting capacity of the
system. For low damping levels, clustered dampers at the position of peak
curvature are shown to be optimal. Conversely for higher damping, harvesters
distributed over the whole structure are more effective.Comment: 12 pages, 10 figures, to appear in Proc. R. Soc.
Effect of fiber orientation on shape and stability of air-water interface on submerged superhydrophobic electrospun thin coatings
To better understand the role of fiber orientation on the stability of superhydrophobicelectrospun coatings under hydrostaticpressures, an integro-differential equation is developed from the balance of forces across the air–water interface between the fibers. This equation is solved numerically for a series of superhydrophobicelectrospun coatings comprised of random and orthogonal fiber orientations to obtain the exact 3D shape of the air–water interface as a function of hydrostaticpressure. More important, this information is used to predict the pressure at which the coatings start to transition from the Cassie state to the Wenzel state, i.e., the so-called critical transition pressure. Our results indicate that coatings composed of orthogonal fibers can withstand higher elevated hydrostaticpressures than those made up of randomly orientated fibers. Our results also prove that thin superhydrophobic coatings can better resist the elevated pressures. The modeling methodology presented here can be used to design nanofibrous superhydrophobic coatings for underwater applications
Predicting shape and stability of air–water interface on superhydrophobic surfaces comprised of pores with arbitrary shapes and depths
An integro-differential equation for the three dimensional shape of air–water interface on superhydrophobicsurfaces comprised of pores with arbitrary shapes and depths is developed and used to predict the static critical pressure under which such surfaces depart from the non-wetting state. Our equation balances the capillary forces with the pressure of the air entrapped in the pores and that of the water over the interface. Stability of shallow and deep circular, elliptical, and polygonal pores is compared with one another and a general conclusion is drawn for designing pore shapes for superhydrophobicsurfaces with maximum stability
Influence of genistein and diadizine on regularity of estrous cycle in cyclic female Wistar rat: interaction with estradiol receptors and vascular endothelial growth factor
Background: Isoflavones are estrogenic compounds that exist in soy, clover, and peanuts. They are selective estrogen receptor modulators.
Aim: The study was planned to explain the interactions of isoflavones with estrogen receptors alpha (ERα), beta (ERβ), and vascular endothelial growth factor (VEGF) expressions in ovarian and uterine tissues during different stages of the estrous cycle of regular cyclic female Wistar rats.
Methods: Thirty-two regular cyclic females were divided equally into control group: fed casein-based diet and isoflavones group: fed casein-based diet and gavaged 50 mg/kg/day soy isoflavones extract 40%. The regularity of estrus cycles was monitored. Final body weight (FBW), weight gain (BWG), and ovarian and uterine weights were estimated. Histopathology and immunohistochemistry for ERα, Erβ, and VEGF in ovarian and uterine tissues were performed.
Results: All females (100%, n = 16) in control group showed regularity in estrous cycle compared to 62.5% (n = 10) in isoflavones group. Estrus and diestrus phases revealed prolongation and shortening in isoflavones rats than control, respectively. Nonsignificant variation was noted in the duration of the whole cycle of both groups. FBW and BWG significantly decreased however, ovarian and uterine weights increased significantly in all estrous phases of isoflavones group than control. Histopathology demonstrated an increase in number of follicles/ovaries besides, hyperplasia and proliferation of luminal epithelium with hydropic degeneration in the isoflavones group. Also, uterine connective tissue stroma showed edema in the isoflavones group during all estrous phases. Immunostaining percentages of ERα, Erβ, and VEGF protein expression were significantly elevated in the isoflavones group during all estrous phases.
Conclusion: Isoflavones induced irregularity of the estrous cycle that was encountered by increased and altered ERα, Erβ, and VEGF expressions in ovarian and uterine tissues
Bio-inspired Tensegrity Soft Modular Robots
In this paper, we introduce a design principle to develop novel soft modular
robots based on tensegrity structures and inspired by the cytoskeleton of
living cells. We describe a novel strategy to realize tensegrity structures
using planar manufacturing techniques, such as 3D printing. We use this
strategy to develop icosahedron tensegrity structures with programmable
variable stiffness that can deform in a three-dimensional space. We also
describe a tendon-driven contraction mechanism to actively control the
deformation of the tensegrity mod-ules. Finally, we validate the approach in a
modular locomotory worm as a proof of concept.Comment: 12 pages, 7 figures, submitted to Living Machine conference 201
- …