Modification of Flow Structure Over a Van Model by Suction Flow Control to Reduce Aerodynamics Drag

Automobile aerodynamic studies are typically undertaken to improve safety and increase fuel efficiency as well as to  find new innovation in automobile technology to deal with the problem of energy crisis and global warming. Some car companies have the objective to develop control solutions that enable to reduce the aerodynamic drag of vehicle and  significant modification progress is still possible by reducing the mass, rolling friction or aerodynamic drag. Some flow  control method provides the possibility to modify the flow separation to reduce the development of the swirling structures around the vehicle. In this study, a family van is modeled with a modified form of Ahmed\u27s body by changing the orientation of the flow from its original form (modified/reversed Ahmed body). This model is equipped with a suction on the rear side to comprehensively examine the pressure field modifications that occur. The investigation combines computational and experimental work. Computational approach used  a commercial software with standard k-epsilon flow turbulence model, and the objectives was  to determine the characteristics of the flow field and aerodynamic drag reduction that occurred in the test model. Experimental approach used load cell in order to validate the aerodynamic drag reduction obtained by computational approach. The results show that the application of a suction in the rear part of the van model give the effect of reducing the wake and the vortex formation. Futhermore, aerodynamic drag reduction close to 13.86% for the computational approach and 16.32% for the experimental have been obtained

Autothermal reforming of palm empty fruit bunch bio-oil: thermodynamic modelling

This work focuses on thermodynamic analysis of the autothermal reforming of palm empty fruit bunch (PEFB) bio-oil for the production of hydrogen and syngas. PEFB bio-oil composition was simulated using bio-oil surrogates generated from a mixture of acetic acid, phenol, levoglucosan, palmitic acid and furfural. A sensitivity analysis revealed that the hydrogen and syngas yields were not sensitive to actual bio-oil composition, but were determined by a good match of molar elemental composition between real bio-oil and surrogate mixture. The maximum hydrogen yield obtained under constant reaction enthalpy and pressure was about 12 wt% at S/C = 1 and increased to about 18 wt% at S/C = 4; both yields occurring at equivalence ratio Φ of 0.31. The possibility of generating syngas with varying H2 and CO content using autothermal reforming was analysed and application of this process to fuel cells and Fischer-Tropsch synthesis is discussed. Using a novel simple modelling methodology, reaction mechanisms were proposed which were able to account for equilibrium product distribution. It was evident that different combinations of reactions could be used to obtain the same equilibrium product concentrations. One proposed reaction mechanism, referred to as the ‘partial oxidation based mechanism’ involved the partial oxidation reaction of the bio-oil to produce hydrogen, with the extent of steam reforming and water gas shift reactions varying depending on the amount of oxygen used. Another proposed mechanism, referred to as the ‘complete oxidation based mechanism’ was represented by thermal decomposition of about 30% of bio-oil and hydrogen production obtained by decomposition, steam reforming, water gas shift and carbon gasification reactions. The importance of these mechanisms in assisting in the eventual choice of catalyst to be used in a real ATR of PEFB bio-oil process was discussed

Timing and variation of supplement intake by breeding cows in the extensive rangelands of northern Australia

Supplementation of rangeland cattle with loose-licks or lick-blocks providing urea in the dry season and phosphorus during the rainy season (Louw 1979) has become foundational to successful cattle breeding in northern Australia. Little is known of the between-animal variation in supplement intake in a commercial environment or associated differences in animal performance. As an initial step in study of supplement responses in northern Australia, the between animal variation in supplement intake and the diurnal variation in accessing supplement were evaluated

Evaluation of remote monitoring units for estimating body weight and supplement intake of grazing cattle

Automated weighing systems to monitor BW and supplement intake (SI) of individual grazing cattle are being developed to better understand the seasonal nutrition and performance of grazing livestock. This study established (1) the accuracy and repeatability of a commercial walk-over weighing (WoW) system for estimating BW and (2) the accuracy of an automatic supplement weighing (ASW) unit for estimating SI based on measuring time spent at the unit. The WoW and ASW units monitored BW and SI of 112 cattle consisting of 55 cows and 57 calves grazed on a 32.5 ha paddock for 41 days, with an average of 258 BW records collected per day. Static BWs were recorded at each mustering event (n = 7) and were compared to repeated measurements collected by the WoW on the day of each mustering event. Body weight was overestimated by the WoW, with the predicted BW of calves and cows averaging 10 and 21 kg heavier, respectively, than actual, and root MS prediction errors (RMSPE) of 5.1% and 5.5% of the static BW, respectively. For both calves and cows, 38% of the MS prediction errors (MSPE) was mean bias (MB) error and 9% of MSPE was slope bias error. The concordance correlation coefficient (CCC; 0.90 v. 0.80) and modelling efficiency (MEF; 0.78 v. 0.62) of WoW BW for calves were higher than for cows, indicating that the predicted values were deviating from a 1 : 1 relationship and in particular as weight increases. A rolling average across five or more consecutive BW measures improved the accuracy of the WoW BW estimates. Regarding estimates of SI, the aggregated time the herd spent at the ASW unit was strongly associated with total SI (R2 = 0.92; P P FBZ) used as an intake marker and its derivatives (oxfendazole and oxfendazole sulfone) in the plasma of individual cows, with R2 of 0.54, 0.73 and 0.75, respectively. Although the WoW overestimated static BW, the low bias in the slope indicated that a linear regression model could be developed to adjust the WoW BW to reduce the MB and improve the estimate of WoW BW. The significant positive relationship between time spent at the ASW unit and individual blood FBZ concentration identified the suitability of the ASW unit for estimating SI by grazing cattle