Effects of wall curvature on the dynamics of an impinging jet and resulting heat transfer

The effects of wall curvature on the dynamics of a round subsonic jet impinging on a concave surface are investigated for the first time by direct numerical solution of the compressible Navier-Stokes equations. Impinging jets on curved surfaces are of interest in several applications, such as the impingement cooling of gas turbine blades. The simulation is performed at Reynolds and Mach numbers respectively equal to 3, 300 and 0.8. The impingement wall is kept at a constant temperature, 80 K higher than that of the jet at the inlet. The nozzle-to-plate distance (measured along the jet axis) is set to 5D, with D the nozzle diameter. In order to highlight the curvature effects, the present results are compared to a previous study of jet impinging on a flat plate. The specific influence of wall curvature is investigated through a frequency analysis based on discrete Fourier transform and dynamic mode decomposition. We found that the peak frequencies of the heat transfer also dominate the dynamics of primary vortices in the free jet region and secondary vortices produced by the interaction of primary vortices and the target plate. These frequencies are approximately 30% lower than those found in the reference study of impinging jet on a flat plate. Imperceptible differences were instead found in the time-averaged integral heat transfer

Direct numerical simulation of an oblique jet in a particle-laden crossflow

Jet in crossflow is a classic fluid dynamics problem widely studied in the last decades because of the big quantity of natural and industrial processes in which it is encountered (Mahesh in Annu Rev Fluid Mech 45(1):379–407, 2013 [6]). The present study focuses on the interaction between solid suspended particles and gas turbines film cooling that is a commonly used coolant technique aiming at generating a protective film of cold fluid around the blade profile. Effective cooling systems are crucial to increase turbine inlet gas temperature and to protect turbine blade surfaces from the huge thermal stress generated

A hydrodynamically optimized nano-electrospray ionization source and vacuum interface

The coupling of atmospheric pressure ionization (API) sources like electrospray ionization (ESI) to vacuum based applications like mass spectrometry (MS) or ion beam deposition (IBD) is done by differential pumping, starting with a capillary or pinhole inlet. Because of its low ion transfer efficiency the inlet represents a major bottleneck for these applications. Here we present a nano-ESI vacuum interface optimized to exploit the hydrodynamic drag of the background gas for collimation and the reduction of space charge repulsion. Up to a space charge limit of 40 nA we observe 100% current transmission through a capillary with an inlet and show by MS and IBD experiments that the transmitted ion beams are well defined and free of additional contamination compared to a conventional interface. Based on computational fluid dynamics modelling and ion transport simulations, we show how the specific shape enhances the collimation of the ion cloud. Mass selected ion currents in the nanoampere range available further downstream in high vacuum open many perspectives for the efficient use of electrospray ion beam deposition (ES-IBD) as a surface coating method

Geriatric oncology: comparing health related quality of life in head and neck cancer patients

Background: Population ageing is increasing the number of people annually diagnosed with cancer worldwide, once most types of tumours are age-dependent. High-quality healthcare in geriatric oncology requires a multimodal approach and should take into account stratified patient outcomes based on factors other than chronological age in order to develop interventions able to optimize oncology care. This study aims to evaluate the Health Related Quality of Life in head and neck cancer patients and compare the scores in geriatric and younger patients. Methods. Two hundred and eighty nine head and neck cancer patients from the Oncology Portuguese Institute participated in the Health Related Quality of Life assessment. Two patient groups were considered: the geriatric ( 65 years old, n = 115) and the younger (45-60 years old, n= 174). The EORTC QLQ-C30 and EORTC QLQ-H&N35 questionnaires were used. Results: Head and neck cancer patients were mostly males, 77.4% within geriatric group and 91.4% among younger patients group. The most frequent tumour locations were similar in both groups: larynx, oral cavity and oropharynx - base of the tongue. At the time of diagnosis, most of younger male patients were at disease stage III/IV (55.9%) whereas the majority of younger female patients were at disease stage I/II (83.4%). The geriatric patient distribution was found to be similar in any of the four disease stages and no gender differences were observed. We found that age (geriatrics scored generally worse), gender (females scored generally worse), and tumour site (larynx tumours denounce more significant problems between age groups) clearly influences Health Related Quality of Life perceptions. Conclusions: Geriatric oncology assessments signalize age-independent indicators that might guide oncologic geriatric care optimization. Decision-making in geriatric oncology must be based on tumour characteristics and chronological age but also on performance status evaluation, co-morbidity, and patient reported outcomes assessment.info:eu-repo/semantics/publishedVersio

Электроснабжение установки перекачки нефти п. Пионерный ОАО «Томскнефть»

РЕФЕРАТ Выпускная квалификационная работа 149 с., 23 рис., 32 табл., 29 источников, 6 прил. Ключевые слова: нефтепровод, насос, электрооборудование, схема электроснабжения, линия, сеть, электроприемник, нагрузка, оборудование, защита, ток, напряжение, мощность. Объектом исследования является электрическая часть УПН п. Пионерный ОАО «Томскенефть». Цель работы – проектирование схемы электроснабжения предприятия, выбор оборудования. В процессе исследования проводился сбор исходных данных в ходе производственной практики на объекте исследования. В результате была спроектирована схема электроснабжения от подстанции энергосистемы, до конечного электроприемника. Были выбраны кабели и провода, коммутационное оборудование, были сделаны необходимые проверки. Также результатом работы сталESSAY Final qualifying work 149 p., 23 fig., 32 tab., 29 sources, 6 adj. Keywords: oil, pump, electrical equipment, power supply circuit, line, network, power-consuming equipment, load equipment, protection, current, voltage, power. The object of research is the electrical part of UPN claim. Pionerny of "Tomskeneft". The purpose of work - designing enterprise power scheme, the choice of equipment. The study was conducted to collect baseline data in the course of practical training on the subject of the study. As a result, power supply circuit has been designed from the substation grid, appliance, to the end. Were selected cables and wires, switching equipment, the necessary checks have been made. It is also the result of the work became an economic calculation of capital costs for the con