579 research outputs found
A parametrically time-dependent methodology for reciprocating contact mechanics between viscoelastic solids
We implement an original Boundary Element methodology to study the reciprocating contact mechanics between linear viscoelastic materials. Results are shown for the case of a rigid sphere sinusoidally driven in sliding contact with a viscoelastic half-space. We observe the presence of multi-peaked pressure and displacement distributions; the hysteric friction curve is finally shown for different values of the frequency
A parametrically time-dependent methodology for reciprocating contact mechanics between viscoelastic solids
We implement an original Boundary Element methodology to study the reciprocating contact mechanics between linear viscoelastic materials. Results are shown for the case of a rigid sphere sinusoidally driven in sliding contact with a viscoelastic half-space. We observe the presence of multi-peaked pressure and displacement distributions; the hysteric friction curve is finally shown for different values of the frequency
The effect of different bleaching protocols, used with and without sodium ascorbate, on bond strength between composite and enamel
This in vitro study aims to evaluate whether a solution of 10% sodium ascorbate (SA) may exert a beneficial effect on the bonding of composite to enamel after using different bleaching agents and protocols. Microtensile bond strength (ÎŒTBS) was evaluated on 72 freshly extracted human central incisors, divided into eight experimental groups and one control group (total n = 9): Group 1 serves as control (nonbleached). Group 2 was bleached with 5% carbamide peroxide. Group 3 was bleached with 5% carbamide peroxide and then treated with 10% SA. Group 4 was bleached with 10% carbamide peroxide. Group 5 was bleached with 10% carbamide peroxide, then treated with 10% SA. Group 6 was bleached with 16% carbamide peroxide. Group 7 was bleached with 16% carbamide peroxide, then treated with 10% SA. Group 8 was bleached with 6% hydrogen peroxide. Group 9 was bleached with 6% hydrogen peroxide, then treated with 10% SA. All groups were restored immediately after the different treatments using a resin composite. The ÎŒTBS values were measured using a universal testing machine and statistical analysis was performed by means of normality and variance analyses, SIDAK test for univariate test and multiple comparisons, and Student test to compare ÎŒTBS values of each group with the control. The mean ÎŒTBS values in groups 2, 4, 6, 8 were significantly lower than controls. For groups 3, 5, 7, 9, subjected to antioxidant (10% SA) application, all ÎŒTBS values increased significantly. However, only for Groups 3 and 5 there was no significant difference with the control. Applying 10% SA for 10 min may improve the bond strength composite/bleached enamel just when whitening is performed with 5% and 10% carbamide peroxide
A theoretical and experimental study of viscoelastic rolling contacts incorporating thermal effects
Laser microtextured surfaces for friction reduction: Does the pattern matter?
Frictional performances of different textures, including axisymmetric and directional patterns, have been tested in the mixed and the hydrodynamic lubrication regimes. Experimental results, corroborated by numerical simulations, show that the leading parameter is the geometrical pattern void ratio since a large number of dimples offers, at low speed, a trap for debris whereas, at high speed, due to the flow expansion in each micro-hole, fosters a fluid pressure drop, the consequent insurgence of micro-cavitation and, ultimately, the reductions of the shear stresses. Furthermore, in this paper, it is shown that, by means of directional textures, equivalent hydrodynamic wedges can be built up, thus establishing different friction performances depending on the flow direction
PMS66 Determinants of Non-Persistence to Antiosteoporotic Drugs by Using Administrative Database
Osteoporosis treatment involves several therapeutic tools, including long-term drug therapy. Subjects with chronic disorders are more likely to be non-adherent and/or non-persistent to treatment than those with other diseases. Adherence is the extent to which patients take medication as prescribed by their physicians, whereas persistence is the time from treatment initiation to discontinuation. Lack of persistence is common among subjects using oral anti-osteoporotic drugs, and leads to increased risk of fragility fracture
Immunohistochemical and biochemical assay of versican in human sound predentine/dentine matrix
Aim of this study was to investigate the distribution of versican proteoglycan within the human dentine organic matrix by means of a correlative immunohistochemical analysis with field emission in-lens scanning electron microscope (FEI-SEM), transmission electron microscope (TEM), fluorescence microscope (FM) and biochemical assay. Specimens containing dentine and predentine were obtained from non carious human teeth and divided in three groups: 1) FEI-SEM group: sections were exposed to a pre-embedding immunohistochemical procedure; 2) TEM group: specimens were fixed, demineralised, embedded and submitted to a post-embedding immunohistochemical procedure; 3) FM group: sections mineralised and submitted to a pre-embedding immunohistochemical procedure with fluorescence labelling. Specimens were exposed to two different antibodies to assay distribution of versican fragments and whole versican molecule. Western Blotting analysis of dentine and pulp extracts was also performed. The correlative FEI-SEM,TEM and FM analysis revealed positive immunoreaction for versican fragments both in predentine and dentine, while few gold particles identifying the whole versican molecule were found in predentine only under TEM. No labelling of versican whole molecule was detected by FEI-SEM and FM analysis. The immunoblotting analysis confirmed the morphological findings. This study suggests that in fully developed human teeth versican fragments are significant constituents of the human dentine and predentine organic matrix, while versican whole molecule can be visualised in scarce amount within predentine only. The role of versican fragments within human dentine organic matrix should be further elucidated
Investigation of the Luco dei Marsi DSGSD revealing the first evidence of a basal shear zone in the central Apennine belt (Italy)
Deep-seated gravitational slope deformations (DSGSDs) show a wide range of geomorphological characteristics and kinematic behaviours. In many cases, deforming rock masses move on a continuous surface or a thick basal shear zone (BSZ) overlying the stable bedrock. The nature of this boundary is a significant issue in scientific debates since examples of BSZs have been observed or inferred in some DSGSDs worldwide. In the central Apennines, although several cases of DSGSDs have been described in recent decades, no evidence of BSZs has been documented thus far. This work presents the first case of a BSZ found in the region at the bottom of a large-scale gravitational deformation that affects the Mesozoic-Cenozoic carbonate ridge overhanging the Luco dei Marsi village (Abruzzi region). The BSZ consists of several metres-thick, cataclastic breccia developed within middle-Upper Cretaceous biodetritic limestone. The breccia level is exposed for approximately 200 m with a subhorizontal geometry and shows severe rock damage and weathering. The DSGSD hosting the BSZ affects an NNW-SSE-oriented and wide Miocene anticline whose eastern limb is dismembered by Pliocene-Quaternary normal faults delimiting the edge of a large Quaternary intermontane basin (the Fucino Basin). Field survey, aerial photointerpretation, and remote sensing (DInSAR technique) analyses outline an active gravity-driven process. This is characterized by several kinds of geomorphological features, including downhill- and uphill-facing scarps, ridge-top depressions, gravitational grabens and trenches in the upper and middle parts of the ridge, and bulging at the toe of the slope. These features, which can be distinguished from tectonic elements due to their shape and extension, are an indication of a high degree of internal deformation and a compound sagging geometry for the Luco dei Marsi DSGSD. The short-term activity of the process was revealed by DInSAR time series covering almost thirty years of satellite datasets, including ERS1/2, ENVISAT, COSMO-SkyMed, and SENTINEL 1 constellations. Strain rates on the order of a few mm/yr were inferred, with a marked difference between different sectors of the DSGSD area. The long-term (y > 102) lifespan of the DSGSD was framed into a multiple-step conceptual model summarizing the Early Pleistocene-Holocene geological evolution of the area. The model results outline the control exercised by extensional tectonics on DSGSD development, as progressive displacements along normal faults in the latest Pleistocene were the cause of lateral unconfinement at the toe of the slope. This work further contributes to the increasing knowledge on DSGSDs in the central Apennines and the understanding of the relationship between deformation features induced by slope morphogenesis, such as the BSZ, and Quaternary tectonics within the mountain belt
Midwives autonomy in discharge women after physiological childbirth
BACKGROUND: International literature identifies the midwife as the professional figure deals with women and newborns in the context of childbirth; it is however found to be still difficult to ensure this continuity of care. In Italy both the national laws and the indications of Emilia Romagna region promote this practice, ensuring the midwives management of the low risk women immediately after childbirth. The aim of the study is to investigate and describe the midwives autonomy as regards the post-partum discharge. METHODS: The computerised medical records were consulted to identify the mothers after childbirth who can be discharged independently by the obstetrician following the guidelines of the Emilia-Romagna region. RESULT S: A retrospective analysis of 1371 medical records related to the period January-June 2017 showed that 41% of discharges were managed handled by the midwives, while the remaining 59% by obstetricians. Fifty-seven percent of the women followed by the family counselling service were discharged by the obstetricians and 43% independently by the midwives. Considering the women followed by a private physician 62% were discharged by the obstetricians and 38% by the midwives. CONCLUSIONS: The study shows that, in a short time from the beginning of the project, the results as regards midwives autonomy were excellent. Indeed the midwives discharges does not differed significantly from the medical ones, and care continuity between the hospital and territory is strengthened. Further studies must include questionnaires concerning satisfaction of the mother not administered in this sample of women
- âŠ