Design of LTCC-based Ceramic Structure for Chemical Microreactor

The design of ceramic chemical microreactor for the production of hydrogen needed in portable polymer-electrolyte membrane (PEM) fuel cells is presented. The microreactor was developed for the steam reforming of liquid fuels with water into hydrogen. The complex three-dimensional ceramic structure of the microreactor includes evaporator(s), mixer(s), reformer and combustor. Low-temperature co-fired ceramic (LTCC) technology was used to fabricate the ceramic structures with buried cavities and channels, and thick-film technology was used to make electrical heaters, temperature sensors and pressure sensors. The final 3D ceramic structure consists of 45 LTCC tapes. The dimensions of the structure are 75 × 41 × 9 mm3 and the weight is about 73 g

Jednostavna neizrazita identifikacija implementirana u naprednom regulatoru

The paper focuses on identification issues of the advanced controller ASPECT* that is implemented on a simple PLC platform with an extra mathematical coprocessor and is intended for the advanced control of complex plants. The model of the controlled plant is obtained by means of experimental modelling using an online learning procedure that combines model identification with pre- and post-identification steps that provide reliable operation. It is shown that acceptable performance of the system is obtained despite difficult conditions that may arise during operation.Ovaj se rad usredotočuje na problematiku identifikacije na osnovi naprednog regulatora ASPECT* implementiranog na jednostavnoj PLC platformi s dodatnim matematičkim koprocesorom, koji se želi koristiti za naprednu regulaciju složenih postrojenja. Model reguliranog postrojenja dobiva se eksperimentalnim modeliranjem, pri čemu se koristi on-line procedura učenja s pred- i post-identifikacijskim koracima koji osiguravaju pouzdan rad. Pokazano je da se prihvatljive performance sustava dobivaju unatoč teškim uvjetima koji se mogu pojaviti tijekom rada

Jednostavna neizrazita identifikacija implementirana u naprednom regulatoru

The paper focuses on identification issues of the advanced controller ASPECT* that is implemented on a simple PLC platform with an extra mathematical coprocessor and is intended for the advanced control of complex plants. The model of the controlled plant is obtained by means of experimental modelling using an online learning procedure that combines model identification with pre- and post-identification steps that provide reliable operation. It is shown that acceptable performance of the system is obtained despite difficult conditions that may arise during operation.Ovaj se rad usredotočuje na problematiku identifikacije na osnovi naprednog regulatora ASPECT* implementiranog na jednostavnoj PLC platformi s dodatnim matematičkim koprocesorom, koji se želi koristiti za naprednu regulaciju složenih postrojenja. Model reguliranog postrojenja dobiva se eksperimentalnim modeliranjem, pri čemu se koristi on-line procedura učenja s pred- i post-identifikacijskim koracima koji osiguravaju pouzdan rad. Pokazano je da se prihvatljive performance sustava dobivaju unatoč teškim uvjetima koji se mogu pojaviti tijekom rada

Control of autothermal reforming reactor of diesel fuel

In this paper a control system for autothermal reforming reactor for diesel fuel is presented. Autothermal reforming reactors and the pertaining purification reactors are used to convert diesel fuel into hydrogen-rich reformate gas, which is then converted into electricity by the fuel cell. The purpose of the presented control system is to control the hydrogen production rate and the temperature of the autothermal reforming reactor. The system is designed in such a way that the two control loops do not interact, which is required for stable operation of the fuel cell. The presented control system is a part of the complete control system of the diesel fuel cell auxiliary power unit (APU)

A toolbox for model-based fault detection and isolation

info:eu-repo/semantics/publishe