The application of the Boolean Stochastic Generation Method to model seepage under levees in heterogeneous soils

Soil heterogeneity plays an important role in incrementing the uncertainty about the reliability of geotechnical engineering works, especially levees. The presence of thin layers of soils more permeable than the surrounding matrix significantly changes the seepage flow net below and within the dike. However, the detection of these layers is extremely difficult. Consequently, to evaluate the overall safety of dikes it may be useful to adopt stochastic computation methods. The paper presents the calibration of a seepage model of an operational river embankment subject to sand boils. The levee, located along the Adige River (South Tyrol, Italy), has been monitored since 2016. Piezometers and spot temperature sensors are installed in the lateral banks while a distributed fiber optic sensors (FOS), buried in a 350 m long trench at the toe of the levee, is used to check temperature distribution in the subground. The Boolean Stochastic Generation (BoSG) method addresses the influence of layers of material with different properties with respect of the surrounding soil. 360 soil configurations were generated for a two-dimensional groundwater flow model of the levee and confronted with the monitoring data of two piezometers. This analysis permits to identify the configuration that has effects more congruent with piezometers data, which in this case is a configuration with a major presence of lenses on the waterside respect the field-side. This evidence could guide strategies for remedial works

On chemiluminescent emission from an infiltrated chiral sculptured thin film

The theory describing the far-field emission from a dipole source embedded inside a chiral sculptured thin film (CSTF), based on a spectral Green function formalism, was further developed to allow for infiltration of the void regions of the CSTF by a fluid. In doing so, the extended Bruggeman homogenization formalism--which accommodates constituent particles that are small compared to wavelength but not vanishingly small--was used to estimate the relative permittivity parameters of the infiltrated CSTF. For a numerical example, we found that left circularly polarized (LCP) light was preferentially emitted through one face of the CSTF while right circularly polarized (RCP) light was preferentially emitted through the opposite face, at wavelengths within the Bragg regime. The centre wavelength for the preferential emission of LCP/RCP light was red shifted as the refractive index of the infiltrating fluid increased from unity, and this red shift was accentuated when the size of the constituent particles in our homogenization model was increased. Also, the bandwidth of the preferential LCP/RCP emission regime decreased as the refractive index of the infiltrating fluid increased from unity

Safety in wine production. A pilot study on the quality evaluation of prosecco wine in the framework of ue regulation

In Italy, wine production is considered a sector of excellence, where the wines’ appreciable sensory features are favored by environmental factors, including weather and climate conditions, which benefit territories with a specific vocation. The whole chain involves many economic and agri-food sector operators, and requires an in-depth assessment of specific risks for identifying critical points, keeping the entire production process under control, and ensuring product traceability. This article describes the results of a pilot study conducted in the Prosecco DOCG (Designations of Controlled and Guaranteed Origin) area, concerning the detection of residues of plant protection products in fifty wine bottles. Although considerably below the maximum residue levels, all the samples tested were positive, ranging from two to five active substances detected in each sample. In addition to the provisions of the European Community legislation, this paper critically evaluates some best practices models that are already used by the Wine Federations of Italy, with the aim of identifying advantages of and areas for improvement in production methods, applicable to raw materials reception, rasping, storage, and bottling phases, in order to guarantee product safety and quality

The importance of sex as a risk factor for hospital readmissions due to pulmonary diseases

BACKGROUND: Pulmonary diseases are a common and costly cause of 30-day readmissions. Few studies have focused on the difference in risk for rehospitalization between men and women in older patients. In this study we analyzed the association between sex and the risk of readmission in a cohort of patients admitted to the hospital for chronic obstructive pulmonary disease (COPD) exacerbation and other major pulmonary diseases. METHODS: This was a retrospective cohort study based on administrative data collected in the Veneto Region in 2016. We included 14,869 hospital admissions among residents aged 6565\u2009years for diagnosis related groups (DRGs) of the most common disorders of the respiratory system: bronchitis and asthma, pneumonia, pulmonary edema, respiratory failure, and COPD. Multilevel logistic regressions were performed to test the association between 30-day hospital readmission and sex, adjusting for confounding factors. RESULTS: For bronchitis and asthma, male patients had significantly higher odds of 30-day readmission than female patients (adjusted odds ratio (aOR), 2.07; 95% confidence interval (CI), 1.11-3.87). The odds of readmission for men were also significantly higher for pneumonia (aOR, 1.40; 95% CI, 1.13-1.72), for pulmonary edema and respiratory failure (aOR, 1.28; 95% CI, 1.05-1.55), and for COPD (aOR, 1.34; 95% CI, 1.00-1.81). CONCLUSIONS: This study found that male sex is a major risk factors for readmission in patients aged more than 65\u2009years with a primary pulmonary diagnosis. More studies are needed to understand the underlying determinants of this phenomena and to provide targets for future interventions

Temperature-mediated transition from Dyakonov-Tamm surface waves to surface-plasmon-polariton waves

The effect of changing the temperature on the propagation of electromagnetic surface waves (ESWs), guided by the planar interface of a homogeneous isotropic temperature-sensitive material (namely, InSb) and a temperature-insensitive structurally chiral material (SCM) was numerically investigated in the terahertz frequency regime. As the temperature rises, InSb transforms from a dissipative dielectric material to a \blue{dissipative} plasmonic material. Correspondingly, the ESWs transmute from Dyakonov--Tamm surface waves into surface--plasmon--polariton waves. The effects of the temperature change are clearly observed in the phase speeds, propagation distances, angular existence domains, multiplicity, and spatial profiles of energy flow of the ESWs. Remarkably large propagation distances can be achieved; in such instances the energy of an ESW is confined almost entirely within the SCM. For certain propagation directions, simultaneous excitation of two ESWs with (i) the same phase speeds but different propagation distances or (ii) the same propagation distances but different phase speeds are also indicated by our results

Analytical methods in wineries: is it time to change?

A review of the methods for the most common parameters determined in wine—namely, ethanol, sulfur dioxide, reducing sugars, polyphenols, organic acids, total and volatile acidity, iron, soluble solids, pH, and color—reported in the last 10 years is presented here. The definition of the given parameter, official and usual methods in wineries appear at the beginning of each section, followed by the methods reported in the last decade divided into discontinuous and continuous methods, the latter also are grouped in nonchromatographic and chromatographic methods because of the typical characteristics of each subgroup. A critical comparison between continuous and discontinuous methods for the given parameter ends each section. Tables summarizing the features of the methods and a conclusions section may help users to select the most appropriate method and also to know the state-of-the-art of analytical methods in this area

Real-world data on treatment outcomes in EGFR-mutant non-small-cell lung cancer patients receiving osimertinib in second or further lines

Aims: This study describes real-world outcomes of pretreated EGFR T790M-positive (T790M+) advanced non-small-cell lung cancer patients progressing after first- or second-generation tyrosine kinase inhibitors and receiving osimertinib, compared with T790M-negative (T790M-) patients. We have also described progression patterns and treatment sequences. Patients & methods: This is a retrospective multicenter Italian observational study including consecutive Caucasian patients referred between 2014 and 2018. Results: 167 patients were included. Median progression-free survival was 9.8 months (95% CI: 8.3-13.3) for T790M+ and 6.0 months (95% CI: 4.9-7.2) for T790M- patients, respectively. Median overall survival was 20.7 months (95% CI: 18.9-28.4) for T790M+ and 10.6 months (95% CI: 8.6-23.6) for T790M- patients, respectively. The T790M mutation correlated with absence of new sites of disease. After progression, most T790M+ patients continued osimertinib, whereas most T790M- patients received a different treatment line. Conclusion: Better outcomes were shown in patients receiving osimertinib. A more limited progression pattern for T790M+ was suggested