Bs0→Ds−a1+(Ds−→ϕπ−,Ds−→K∗0K−)B_s^0 \to D_s^-a_1^+(D_s^- \to \phi \pi^-, D_s^- \to K^{*0}K^-) decay channel in the ATLAS Bs0B_s^0-mixing studies

It is shown, using a track-level simulation, that the use of the $D_s^- \to K^{*0}K^-$ decay channel for $D_s^-$ reconstruction, in additioon with the previously studied $D_s^- \to \phi \pi^-$ mode, enables two fold gain in the ATLAS $B_s^0$-mixing signal statistics through $B_s^0 \to D_s^-a_1$ $B_s^0$-decay channel. A new modification of the amplitude fit method is suggested for the $x_s$ determination. Some general aspects of the $B_s^0$-mixing phenomenon is illustrated by pictures of Casimir Malevich, Maurits Cornelis Escher and Salvador Dali.Comment: 23 pages, LaTex, 7 figures and 4 picture

Measurement of the energy resolution and calibration of hybrid pixel detectors with GaAs:Cr sensor and Timepix readout chip

This paper describes an iterative method of per-pixel energy calibration of hybrid pixel detectors with GaAs:Cr sensor and Timepix readout chip. A convolution of precisely measured spectra of characteristic X-rays of different metals with the resolution and the efficiency of the pixel detector is used for the calibration. The energy resolution of the detector is also measured during the calibration. The use of per-pixel calibration allows to achieve a good energy resolution of the Timepix detector with GaAs:Cr sensor: 8% and 13% at 60 keV and 20 keV, respectively

Water data analysis: data reduction from beam and ITC info

After recalling the motivation for the analysis of water data, the first stage of data reduction is discussed. This data reduction is based on the selection of protons using beam detector data and ITC information. The resolution of the interaction time in the target which serves as reference for time-of-flight measurement of secondaries, is determined with stable beam optics to be 77 ps, otherwise 106 ps. Cuts, their selection efficiency, event numbers, purity of the data sample after cuts, and some ITC characteristics are presented

Revisiting the 'LSND anomaly' II: critique of the data analysis

This paper, together with a preceding paper, questions the so-called 'LSND anomaly': a 3.8 sigma excess of antielectronneutrino interactions over standard backgrounds, observed by the LSND Collaboration in a beam dump experiment with 800 MeV protons. That excess has been interpreted as evidence for the antimuonneutrino to antielectronneutrino oscillation in the \Deltam2 range from 0.2 eV2 to 2 eV2. Such a \Deltam2 range is incompatible with the widely accepted model of oscillations between three light neutrino species and would require the existence of at least one light 'sterile' neutrino. In a preceding paper, it was concluded that the estimates of standard backgrounds must be significantly increased. In this paper, the LSND Collaboration's estimate of the number of antielectronneutrino interactions followed by neutron capture, and of its error, is questioned. The overall conclusion is that the significance of the 'LSND anomaly' is not larger than 2.3 sigma.Comment: 30 pages, 16 figures, 6 table

Cross-sections of large-angle hadron production in proton- and pion-nucleus interactions VII: tin nuclei and beam momenta from \pm3 GeV/c to \pm15 GeV/c

We report on double-differential inclusive cross-sections of the production of secondary protons, charged pions, and deuterons, in the interactions with a 5% nuclear interaction length thick stationary tin target, of proton and pion beams with momentum from \pm3 GeV/c to \pm15 GeV/c. Results are given for secondary particles with production angles between 20 and 125 degrees. Cross-sections on tin nuclei are compared with cross-sections on beryllium, carbon, copper, tantalum and lead nuclei.Comment: 68 pages, 13 figure

Reply to 'Corrections to the HARP-CDP Analysis of the LSND Neutrino Oscillation Backgrounds'

The alleged mistakes in recent papers that reanalyze the backgrounds to the 'LSND anomaly' do not exist. We maintain our conclusion that the significance of the 'LSND anomaly' is not 3.8 sigma but not larger than 2.3 sigma.Comment: 3 page

Why the paper CERN-PH-EP-2009-015 (arXiv:0903.4762) is scientifically unacceptable

The paper CERN-PH-EP-2009-015 (arXiv:0903.4762) by A. Bagulya et al. violates standards of quality of work and scientific ethics on several counts. The paper contains assertions that contradict established detector physics. The paper falls short of proving the correctness of the authors' concepts and results. The paper ignores or quotes misleadingly pertinent published work. The paper ignores the fact that the authors' concepts and results have already been shown wrong in the published literature. The authors seem unaware that cross-section results from the 'HARP Collaboration' that are based on the paper's concepts and algorithms are in gross disagreement with the results of a second analysis of the same data, and with the results of other experiments.Comment: 8 pages, 3 figure

Cross-sections of large-angle hadron production in proton-- and pion--nucleus interactions VIII: aluminium nuclei and beam momenta from {\pm}3 GeV/c to {\pm}15 GeV/c

We report on double-differential inclusive cross-sections of the production of secondary protons, charged pions, and deuterons, in the interactions with a 5% {\lambda}int thick stationary aluminium target, of proton and pion beams with momentum from \pm3 GeV/c to \pm15 GeV/c. Results are given for secondary particles with production angles between 20 and 125 degrees. Cross-sections on aluminium nuclei are compared with cross-sections on beryllium, carbon, copper, tin, tantalum and lead nuclei.Comment: 71 pages, 16 figures, 47 table