6,092 research outputs found
Lactobacillus paracasei A13 and high-pressure homogenization stress response
Sub-lethal high-pressure homogenization treatments applied to Lactobacillus paracasei A13 demonstrated to be a useful strategy to enhance technological and functional properties without detrimental effects on the viability of this strain. Modification of membrane fatty acid composition is reported to be the main regulatory mechanisms adopted by probiotic lactobacilli to counteract high-pressure stress. This work is aimed to clarify and understand the relationship between the modification of membrane fatty acid composition and the expression of genes involved in fatty acid biosynthesis in Lactobacillus paracasei A13, before and after the application of different sub-lethal hyperbaric treatments. Our results showed that Lactobacillus paracasei A13 activated a series of reactions aimed to control and stabilize membrane fluidity in response to high-pressure homogenization treatments. In fact, the production of cyclic fatty acids was counterbalanced by the unsaturation and elongation of fatty acids. The gene expression data indicate an up-regulation of the genes accA, accC, fabD, fabH and fabZ after high-pressure homogenization treatment at 150 and 200 MPa, and of fabK and fabZ after a treatment at 200 MPa suggesting this regulation of the genes involved in fatty acids biosynthesis as an immediate response mechanism adopted by Lactobacillus paracasei A13 to high-pressure homogenization treatments to balance the membrane fluidity. Although further studies should be performed to clarify the modulation of phospholipids and glycoproteins biosynthesis since they play a crucial role in the functional properties of the probiotic strains, this study represents an important step towards understanding the response mechanisms of Lactobacillus paracasei A13 to sub-lethal high-pressure homogenization treatments
Efficacy of biodegradable, antimicrobial packaging on safety and quality parameters maintenance of a pear juice and rice milk-based smoothie product
In this study, the effect of a Polylactic acid (PLA) antimicrobial biodegradable packaging activated with lysozyme by cold plasma on a pear juice and rice milk-based smoothie was investigated. The antimicrobial effect of the active innovative packaging was evaluated In-vitro and on the smoothie inoculated with Listeria monocytogenens and Lactobacillus plantarum. After a preliminary evaluation of the lysozyme release kinetics in different conditions, its influence on some smoothie quality parameters (water activity, pH, colour and microbial growth) was evaluated. In-vitro trials showed an antimicrobial activity of the activated film against different microorganisms. Inoculated smoothies packed in activated and not materials were stored at 10 and 4 °C and analysed overtime. Results showed the capability of the activated package to inhibit Listeria monocytogenes and to maintain a better and a more stable colour compared to control ones. Activated pouches showed the best antimicrobial effect on samples stored at 10 °C compared to 4 °C, difference due to the faster lysozyme release kinetic from the packaging material at the highest storage temperature. Obtained results highlight the potentiality of the biodegradable packaging activated with lysozyme to be applied successfully in food industry, to improve safety and extend shelf-life of juice-based product
Evaluation of a Gel Containing a Propionibacterium Extract in an In Vivo Model of Wound Healing
Inappropriate wound healing (WH) management can cause significant comorbidities, especially in patients affected by chronic and metabolic diseases, such as diabetes. WH involves several different, partially overlapping processes, including hemostasis, inflammation, cell proliferation, and remodeling. Oxidative stress in WH contributes to WH impairment because of the overexpression of radical oxygen species (ROS) and nitrogen species (RNS). This study aimed to evaluate the in vitro antioxidative action of a gel containing a Propionibacterium extract (Emorsan (R) Gel) and assess its skin re-epithelialization properties in a mouse model of WH. The scavenging effects of the bacterial extract were assessed in vitro through the ABTS and DPPH assays and in L-929 murine fibroblasts. The effects of the Emorsan (R) Gel were studied in vivo in a murine model of WH. After WH induction, mice were treated daily with vehicle or Emorsan (R) Gel for 6 or 12 days. According to the in vitro tests, the Propionibacterium extract exerted an inhibitory effect on ROS and RNS, consequently leading to the reduction in malondialdehyde (MDA) and nitrite levels. Before proceeding with the in vivo study, the Emorsan (R) Gel was verified to be unabsorbed. Therefore, the observed effects could be ascribed to a local action. The results obtained in vivo showed that through local reduction of oxidative stress and inflammation (IL-1 beta, TNF-alpha), the Emorsan (R) Gel significantly reduced the infiltration of mast cells into the injured wound, leading to the amelioration of symptoms such as itch and skin irritation. Therefore, the Emorsan (R) Gel improved the speed and percentage of wound area closure by improving the tissue remodeling process, prompting vascular-endothelial growth factor (VEGF) and transforming growth factor (TGF)-beta production and reducing the expression of adhesion molecules. Emorsan (R) Gel, by its ability to inhibit free radicals, could reduce local inflammation and oxidative stress, thus enhancing the speed of wound healing
Tests of model of color reconnection and a search for glueballs using gluon jets with a rapidity gap
Gluon jets with a mean energy of 22 GeV and purity of 95% are selected from
hadronic Z0 decay events produced in e+e- annihilations. A subsample of these
jets is identified which exhibits a large gap in the rapidity distribution of
particles within the jet. After imposing the requirement of a rapidity gap, the
gluon jet purity is 86%. These jets are observed to demonstrate a high degree
of sensitivity to the presence of color reconnection, i.e. higher order QCD
processes affecting the underlying color structure. We use our data to test
three QCD models which include a simulation of color reconnection: one in the
Ariadne Monte Carlo, one in the Herwig Monte Carlo, and the other by Rathsman
in the Pythia Monte Carlo. We find the Rathsman and Ariadne color reconnection
models can describe our gluon jet measurements only if very large values are
used for the cutoff parameters which serve to terminate the parton showers, and
that the description of inclusive Z0 data is significantly degraded in this
case. We conclude that color reconnection as implemented by these two models is
disfavored. The signal from the Herwig color reconnection model is less clear
and we do not obtain a definite conclusion concerning this model. In a separate
study, we follow recent theoretical suggestions and search for glueball-like
objects in the leading part of the gluon jets. No clear evidence is observed
for these objects.Comment: 42 pages, 18 figure
Search for the Standard Model Higgs Boson with the OPAL Detector at LEP
This paper summarises the search for the Standard Model Higgs boson in e+e-
collisions at centre-of-mass energies up to 209 GeV performed by the OPAL
Collaboration at LEP. The consistency of the data with the background
hypothesis and various Higgs boson mass hypotheses is examined. No indication
of a signal is found in the data and a lower bound of 112.7GeV/C^2 is obtained
on the mass of the Standard Model Higgs boson at the 95% CL.Comment: 51 pages, 21 figure
A study of charm production in beauty decays with the OPAL detector at LEP
Using an inclusive method, BR(b -> D\bar{D}X) has been measured in hadronic
Z^0 decays with the OPAL detector at LEP. The impact parameter significance of
tracks opposite tagged b-jets is used to differentiate b -> D\bar{D}X decays
from other decays. Using this result, the average number of charm and
anti-charm quarks produced per beauty quark decay, n_c, is determined.Comment: 20 pages, 4 figure
Measurement of triple gauge boson couplings from WW production at LEP energies up to 189 GeV
A measurement of triple gauge boson couplings is presented, based on W-pair
data recorded by the OPAL detector at LEP during 1998 at a centre-of-mass
energy of 189 GeV with an integrated luminosity of 183 pb^-1. After combining
with our previous measurements at centre-of-mass energies of 161-183 GeV we
obtain k_g=0.97 +0.20 -0.16, g_1^z=0.991 +0.060 -0.057 and lambda_g=-0.110
+0.058 -0.055, where the errors include both statistical and systematic
uncertainties and each coupling is determined by setting the other two
couplings to their SM values. These results are consistent with the Standard
Model expectations.Comment: 28 pages, 8 figures, submitted to Eur. Phys. J.
Search for Nearly Mass-Degenerate Charginos and Neutralinos at LEP
A search was performed for charginos with masses close to the mass of the
lightest neutralino in e+e- collisions at centre-of-mass energies of 189-209
GeV recorded by the OPAL detector at LEP. Events were selected if they had an
observed high-energy photon from initial state radiation, reducing the dominant
background from two-photon scattering to a negligible level. No significant
excess over Standard Model expectations has been observed in the analysed data
set corresponding to an integrated luminosity of 570pb-1. Upper limits were
derived on the chargino pair-productin cross-section, and lower limits on the
chargino mass were derived in the context of the Minimal Supersymmetric
Extension of the Standard Model for the gravity and anomaly mediated
Supersymmetry breaking scenarios.Comment: 26 pages, 9 figure
A Measurement of Semileptonic B Decays to Narrow Orbitally-Excited Charm Mesons
The decay chain b -> Bbar -> D^{**0} l nu X, D^{**0} -> D^{*+} pi^-, D^{*+}
-> D^0 pi^+, D^0 ->(Kpi or K3pi) is identified in a sample of 3.9 million
hadronic Z decays collected with the OPAL detector at LEP. The branching ratio
BR (b -> Bbar) x BR (Bbar -> D^0_1 l nu X) x BR (D^0_1 -> D^{*+} pi^-) is
measured to be (2.64 +- 0.79 (stat) +- 0.39 (syst)) X 10^-3 for the J^P = 1^+
(D^0_1) state. For decays into the J^P = 2^+ (D^{*0}_2) state, an upper limit
of 1.4 X 10^-3 is placed on the branching ratio at the 95% confidence level.Comment: 20 pages, 6 figure
Search for Neutral Higgs Bosons in e+e- Collisions at sqrt(s) ~189GeV
A search for neutral Higgs bosons has been performed with the OPAL detector
at LEP, using approximately 170 pb-1 of e+e- collision data collected at
sqrt(s)~189GeV. Searches have been performed for the Standard Model (SM)
process e+e- to H0Z0 and the MSSM processes e+e- to H0Z0, A0h0. The searches
are sensitive to the b b-bar and tau antitau decay modes of the Higgs bosons,
and also to the MSSM decay mode h0 to A0A0. OPAL search results at lower
centre-of-mass energies have been incorporated in the limits we set, which are
valid at the 95% confidence level. For the SM Higgs boson, we obtain a lower
mass bound of 91.0 GeV. In the MSSM, our limits are mh>74.8GeV and mA>76.5GeV,
assuming tan(beta)>1, that the mixing of the scalar top quarks is either zero
or maximal, and that the soft SUSY-breaking masses are 1 TeV. For the case of
zero scalar top mixing, we exclude values of tan(beta) between 0.72 and 2.19.Comment: 38 pages, 15 figures, submitted Euro. Phys. J.
- …