3,271 research outputs found
Data Layout Optimization and Code Transformation for Paged Memory Systems
Supercomputers need not only to have fast functional units, but also to have rapid access to massive quantities of data. Virtual memory paging and physically distributed memory systems both attempt to provide this large data space, but performance of a computer system using either memory organization is highly dependent on the page reference pattern and the number of pages available locally. Despite this, surprisingly little work has been done toward using the compiler to optimize memory system performance. In this paper, we introduce compiler techniques which use a combination of data layout and code transformation to improve paging performance for compiled programs. These same techniques can also be applied manually to improve performance using existing compilers
Method of Metallurgically Bonding Articles and Article Therefor
An article suitable for laser-welded metallurgical bonding, the article having a first part having a lower surface, and a second part having an upper surface is disclosed. The lower surface of the first part is disposed at the upper surface of the second part to provide for a faying surface thereat. The faying surface has a plurality of channels with a depth equal to or greater than about 1 micron and equal to or less than about 1000 microns. The article is suitable for laser-welded metallurgical bonding at the faying surface. The plurality of channels has a repetitive pattern of channels arranged along a path of the faying surface in a direction of the metallurgical bonding action
Method of Metallurgically Bonding Articles and Article Therefor
An article suitable for arc-welded metallurgical bonding having a first part having a lower surface, and a second part having an upper surface is disclosed. The lower surface of the first part is disposed at the upper surface of the second part to provide for a faying surface thereat. The faying surface has a plurality of channels with a depth equal to or greater than about 1 micron and equal to or less than about 1000 microns. The article is suitable for arc-welded metallurgical bonding at the faying surface. The plurality of channels has a repetitive pattern of channels arranged along a path of the faying surface in a direction of the metallurgical bonding action
Gaseous, PM2.5 Mass, and Speciated Emission Factors from Laboratory Chamber Peat Combustion
Peat fuels representing four biomes of boreal (western Russia and Siberia), temperate (northern Alaska, USA), subtropical (northern and southern Florida, USA), and tropical (Borneo, Malaysia) regions were burned in a laboratory chamber to determine gas and particle emission factors (EFs). Tests with 25 % fuel moisture were conducted with predominant smoldering combustion conditions (average modified combustion efficiency (MCE) =0.82+/-0.08). Average fuel-based EFCO2 (carbon dioxide) are highest (1400 +/- 38 g kg(-1)) and lowest (1073 +/- 63 g kg(-1)) for the Alaskan and Russian peats, respectively. EFCO (carbon monoxide) and EFCH4 (methane) are similar to 12 %15 % and similar to 0.3 %0.9 % of EFCO2, in the range of 157171 and 310 g kg(-1), respectively. EFs for nitrogen species are at the same magnitude as EFCH4, with an average of 5.6 +/- 4.8 and 4.7 +/- 3.1 g kg(-1) for EFNH3 (ammonia) and EFHCN (hydrogen cyanide); 1.9+/-1.1 g kg(-1) for EFNOx (nitrogen oxides); and 2.4+/-1.4 and 2.0 +/- 0.7 g kg(-1) for EFNOy (total reactive nitrogen) and EFN2O (nitrous oxide). An oxidation flow reactor (OFR) was used to simulate atmospheric aging times of similar to 2 and similar to 7 d to compare fresh (upstream) and aged (downstream) emissions. Filter-based EFPM2.5 varied by \u3e 4-fold (1461 g kg(-1)) without appreciable changes between fresh and aged emissions. The majority of EFPM2.5 consists of EFOC (organic carbon), with EFOC / EFPM2.5 ratios in the range of 52 %98 % for fresh emissions and similar to 14 %23 % degradation after aging. Reductions of EFOC (similar to 79 g kg(-1)) after aging are most apparent for boreal peats, with the largest degradation in low-temperature OC1 that evolves at \u3c 140 degrees C, indicating the loss of high-vapor-pressure semivolatile organic compounds upon aging. The highest EFLevoglucosan is found for Russian peat (similar to 16 g kg(-1)), with similar to 35 %50 % degradation after aging. EFs for water-soluble OC (EFWSOC) account for similar to 20 %62 % of fresh EFOC. The majority (\u3e 95 %) of the total emitted carbon is in the gas phase, with 54 %75 % CO2, followed by 8 %30 % CO. Nitrogen in the measured species explains 24 %52 % of the consumed fuel nitrogen, with an average of 35 +/- 11 %, consistent with past studies that report similar to 1/3 to 2/3 of the fuel nitrogen measured in biomass smoke. The majority (\u3e 99 %) of the total emitted nitrogen is in the gas phase, with an average of 16.7 % as NH3 and 9.5 % as HCN center dot N2O and NOy constituted 5.7 % and 2.9 % of consumed fuel nitrogen. EFs from this study can be used to refine current emission inventories
Novel deployment of a covered duodenal stent in open surgery to facilitate closure of a malignant duodenal perforation
<p>Abstract</p> <p>Background</p> <p>Its a dilemma to attempt a palliative procedure to debulk the tumour and/or prevent future obstructive complications in a locally advanced intra abdominal malignancy.</p> <p>Case presentation</p> <p>A 38 year old Vietnamese man presented with a carcinoma of the colon which had invaded the gallbladder and duodenum with a sealed perforation of the second part of the duodenum. Following surgical exploration, it was evident that primary closure of the perforated duodenum was not possible due to the presence of unresectable residual tumour.</p> <p>Conclusion</p> <p>We describe a novel technique using a covered duodenal stent deployed at open surgery to aid closure of a malignant duodenal perforation.</p
Calibration of Parshall Flumes with Non-Standard Entrance Transitions
The 9-ince and 18-inch Parshall flumes with the throat section installed level with the bottom of an incoming pipe were tested. The measured discharges for given flow depths (free flow) or differences in flow depths (submerged flow) were found to deviate quite significantly fromt he computed standard Parshall flume disharges at both low and high flow rates. New empirical formulats have been developed to take such deviations into account. It is noted that values of the coefficients and exponents contained in the new formulas depend on the throat size of the flume and the slope of the incoming pipe. Calibration curves and tables were prepared for convenient applications of the new formulas
Thermoelectric properties of p-type polycrystalline SnSe doped with Ag
Many IVāVI semiconductors tend to be good thermoelectric materials, these include all Pb chalcogenides as well as Pb-free SnTe: all of which crystallize in a NaCl cubic structure. Another group of IVāVI compounds form layered orthorhombic structures. SnSe is one of these compounds, whose transport properties as a polycrystalline thermoelectric material have rarely been studied. Here we present our study of p-type polycrystalline SnSe doped with Ag, prepared by melting and hot pressing. SnSe has anisotropic properties with hysteresis observed in resistivity between 300 and 650 K regardless of doping. Ag is not an ideal dopant but is able to increase the carrier density significantly, as a result a peak zT of 0.6 was observed at 750 K. Transport properties of doped SnSe can be explained with a single parabolic band model, which suggests promising potential for this compound together with its challenges
- ā¦