1,688 research outputs found

    Station coordinates in the standard earth 3 system and radiation-pressure perturbations from ISAGEX camera data

    Get PDF
    Simultaneous and individual camera observations of GEOS 1, GEOS 2, Pageos, and Midas 4 obtained during the International Satellite Geodesy Experiment are utilized to determine station coordinates. The Smithsonian Astrophysical Observatory Standard Earth III system of coordinates is used to tie the geometrical network to a geocentric system and as a reference for calculating satellite orbits. A solution for coordinates combining geometrical and dynamical methods is obtained, and a comparison between the solutions and terrestrial data is made. The radiation-pressure and earth-albedo perturbations for Pageos are very large, and Pageos' orbits are used to evaluate the analytical treatment of these perturbations. Residual effects, which are probably of interest to aeronomists, remain in the Pageos orbits

    Realization of Artificial Ice Systems for Magnetic Vortices in a Superconducting MoGe Thin-film with Patterned Nanostructures

    Full text link
    We report an anomalous matching effect in MoGe thin films containing pairs of circular holes arranged in such a way that four of those pairs meet at each vertex point of a square lattice. A remarkably pronounced fractional matching was observed in the magnetic field dependences of both the resistance and the critical current. At the half matching field the critical current can be even higher than that at zero field. This has never been observed before for vortices in superconductors with pinning arrays. Numerical simulations within the nonlinear Ginzburg-Landau theory reveal a square vortex ice configuration in the ground state at the half matching field and demonstrate similar characteristic features in the field dependence of the critical current, confirming the experimental realization of an artificial ice system for vortices for the first time.Comment: To appear in Phys. Rev. Let

    Local demands on sterile neutrinos

    Full text link
    In a model independent manner, we explore the local implications of a single neutrino oscillation measurement which cannot be reconciled within a three-neutrino theory. We examine this inconsistency for a single region of baseline to neutrino energy L/EL/E. Assuming that sterile neutrinos account for the anomaly, we find that the {\it local} demands of this datum can require the addition to the theory of one to three sterile neutrinos. We examine the constraints which can be used to determine when more than one neutrino would be required. The results apply only to a given region of L/EL/E. The question of the adequacy of the sterile neutrinos to satisfy a global analysis is not addressed here. Finally, using the results of a 3+2 analysis, we indicate values for unknown mixing matrix elements which would require two sterile neutrinos due to local demands only.Comment: 11 pages, 1 figure, discussion adde

    Efficacy of “therapist-selected” versus “randomly selected” mobilisation techniques for the treatment of low back pain: A randomised controlled trial

    Get PDF
    The aim of this study was to establish whether the mobilisation technique selected by the treating physiotherapist is more effective in relieving low back pain than a randomly selected mobilisation technique. Two manipulative physiotherapists and 140 subjects suffering non-specific low back pain participated. Baseline measurements were taken before treatment allocation; the therapist then assessed subjects and nominated the preferred treatment grade, spinal level to be treated and mobilisation technique to be used. The subjects were then randomly allocated to one of two groups. One group received the preferred mobilisation technique as selected by the therapist; the other group received a randomly assigned mobilisation technique. All mobilisation treatments were applied to the nominated spinal level using the nominated treatment grade. Follow-up measures were taken immediately after intervention. Two-way ANOVA was used to analyse the data; the first factor was the treatment group and the second factor was the direction of the patient's most painful movement. The choice of mobilisation treatment had no effect on any outcome measure investigated in this study; however, post hoc tests revealed that mobilisation treatment applied to the lower lumbar levels had a greater analgesic effect than when applied to upper lumbar levels. The results of this study confirm that lumbar mobilisation treatment has an immediate effect in relieving low back pain, however the specific technique used seems unimportant

    A Systematic Review of Methods to Incorporate External Evidence into Trial-Based Survival Extrapolations for Health Technology Assessment

    Get PDF
    Background: External evidence is commonly used to inform survival modeling for health technology assessment (HTA). While there are a range of methodological approaches that have been proposed, it is unclear which methods could be used and how they compare. Purpose: This review aims to identify, describe, and categorize established methods to incorporate external evidence into survival extrapolation for HTA. Data Sources: Embase, MEDLINE, EconLit, and Web of Science databases were searched to identify published methodological studies, supplemented by hand searching and citation tracking. Study Selection: Eligible studies were required to present a novel extrapolation approach incorporating external evidence (i.e., data or information) within survival model estimation. Data Extraction: Studies were classified according to how the external evidence was integrated as a part of model fitting. Information was extracted concerning the model-fitting process, key requirements, assumptions, software, application contexts, and presentation of comparisons with, or validation against, other methods. Data Synthesis: Across 18 methods identified from 22 studies, themes included use of informative prior(s) (n = 5), piecewise (n = 7), and general population adjustment (n = 9), plus a variety of “other” (n = 8) approaches. Most methods were applied in cancer populations (n = 13). No studies compared or validated their method against another method that also incorporated external evidence. Limitations: As only studies with a specific methodological objective were included, methods proposed as part of another study type (e.g., an economic evaluation) were excluded from this review. Conclusions: Several methods were identified in this review, with common themes based on typical data sources and analytical approaches. Of note, no evidence was found comparing the identified methods to one another, and so an assessment of different methods would be a useful area for further research. This review aims to identify methods that have been used to incorporate external evidence into survival extrapolations, focusing on those that may be used to inform health technology assessment. We found a range of different approaches, including piecewise methods, Bayesian methods using informative priors, and general population adjustment methods, as well as a variety of “other” approaches. No studies attempted to compare the performance of alternative methods for incorporating external evidence with respect to the accuracy of survival predictions. Further research investigating this would be valuable

    Convergence of the waste and water sectors: risks, opportunities and future trends – discussion paper

    Full text link
    The aim of this discussion paper is to bring to light the increasing convergence of the water and waste sectors and the associated risks, benefits, and future trends already on the horizon. Current examples of convergence in managing coal seam gas (CSG), food waste, fats, oils and grease (FOG) and biosolids, provide insights into not only the risks to public and environmental health of waste streams that cross sectoral boundaries but also potential opportunities for the water and waste sectors to seize as business opportunities. What is clear is that convergence between these sectors is already happening and in some cases there are adverse environmental consequences and associated health impacts. A key message from this research is the need to take an integrated and coordinated approach to planning and regulating the convergence of the water and waste sectors. Key recommendations to manage the risks associated with cross sector convergence of the water and waste sectors include facilitating: (1) increased engagement between regulators of each sector, (2) greater communication across sectors (3) a co-ordinated approach and plan to managing waste streams, (4) the development of monitoring and evaluation frameworks that cross sectors and (5) a coordinated approach to the assessment of research needs

    Homeowners and Their Choice of Information Sources About Gardening

    Get PDF
    The Georgia Cooperative Extension Service increases its involvement in educating homeowners in fertilizer and pesticide use to reduce nonpoint source pollution from residential landscapes. A survey of homeowners revealed their current and preferred sources of gardening information. By dividing information sources according to the degree of their accessibility and cost, we determined the differences in the use of various sources according to homeowner gender, age, and education. Females, young homeowners, and those with a high level of education used and preferred more information sources. The Georgia Cooperative Extension Service will use a combination of sources to effectively disseminate best management practices to homeowners

    Final Summary Report to the Narragansett Bay Project Office: Assessment of Organic Contaminants in Narragansett Bay Sediments and Hard Shell Clams

    Get PDF
    As part of a multidisciplinary investigation on the sediments of Narragansett Bay, sediment trap materials, surface sediments, hard shell clams (Mercenaria mercenaria) and sediment cores from throughout the bay were analyzed for organic contaminants including: polychlorinated biphenyls (PCBs), petroleum hydrocarbons (PHCs). polycyclic aromatic hydrocarbons (PAHs), substituted benzotriazoles (BZTs), bis (2-ethylhexyl) phthalate (DEHP) and coprostanol (COP). The objectives of this particular study were to provide information on the source, transport and biogeochemical fate of organic contaminants in the bay: while the overall goals of the investigation were to characterize the sediments and sedimentary processes of the Narragansett Bay system based on the results of integrated biological, chemical and geological studies. Sediment Trap Materials The sediment trap samples showed a trend of decreasing concentration for most components from Fox Point to Ohio Ledge, suggesting that the source(s) of these contaminants were pollution discharges (e.g., industrial and municipal effluents, CSOs. spills and runoff,) to the upper Providence River and its tributaries. In general, the agreement between the results from the present sediment trap study and older suspended solids data (1985-86) was quite good. However, the PHC concentrations reponed in 1977 were considerably higher than the more recent values. But it is difficult, if not impossible, to determine if changes have really occurred based on the limited number of samples analyzed and procedural variations in the different studies. In the case of BZT concentrations and their ratios (C10-BZT/Cl-BZT), there was a maximum amount of both BZTs and a minimum ratio in trap material at a Providence River station about 7 km south of Fox Point (i.e., adjacent to the Pawtuxet Cove entrance). This trend with distance is probably due to the source of the BZTs to the Providence River which is the Pawtuxet River via Pawtuxet Cove. The BZT ratio indicates a change in the relative amounts of the two compounds over the distance from the point of entry, i.e., there is a trend of increasing values with distance from Pawtuxet Cove (ratio = 1.5) to Ohio Ledge (ratio = 3.2). The ratio for sediment trap material from the Pawtuxet River was 1.0 - 2.0; since these values are generally lower than any others reported, it suggests that the river is the major source of the material in the Pawtuxet Cove traps. The relationships between contaminant concentrations in sediment trap material and surface sediments were quite good. For Ar 1254, the sediment levels were about twice the trap values. Conversely, the hydrocarbon concentrations in trap material were about 1.5 times as high for PHCs and about equal in pyrene, relative to the surface sediments. (In all cases, the correlations were significant at the 95% confidence level). In general, these data support the concept that the chemical composition of particulate material and surf ace sediments are closely related, and that the former could be a major source of contaminants to the underlying surface sediments. It is also possible that resuspended surface sediments could contribute to the particulate material in the water column depending on a number of factors such as bottom currents and extent of bioturbation. There was a significant relationship between the concentration of Cl-BZT in trap material and surface sediments; however, the relationship for the C10-BZT was not as good. and there is presently no explanation for these differences other than that the production of C-BZT started in 1963 and ceased in 1972, while that of the C10-BZT started in 1970 and continued to 1985. (The log Kow for both BZTs are essentially the same, Pruell & Quinn, 1985.) Perhaps, the former BZTs more uniformally distributed in particulate material and sediments than the more recently discharged C10-BZT. Changes in the BZT ratio (C10/Cl) of trap material may be due to a number of reasons including: the preferential retention of the C10-BZT and/or loss of Cl-BZT due to various biogeochemical reactions, and the resuspension of more recent sediments containing higher concentrations of the C10-BZT. This trend would be in agreement with the low ratio in Pawtuxet River surface sediments relative to sediment from the other locations where the ratios generally increase as found in the trap material. For example, the BZT ratio in surface sediments from Ohio Ledge is 7.2, in the mid-bay it is 8.2 and at the west passage the ratio is 9.5 (significant at the 9S% confidence level). Surface Sediments and Clams In general, the levels of all contaminants were highest in the Providence River sediments and decreased exponentially with distance downbay, with the lowest values usually found at the mouth of the bay. The major exception was a station in Newport Harbor in the lower east passage, where the concentrations of PHCs, PCBs and COP were relatively high and similar to some of the upper bay stations. The sources of the contaminants at this station may be related to sewage effluent, CSO discharges and runnoff to the harbor area. One way of evaluating the distribution of various contaminants in surface sediments is to compare the half distances for these components (defined as the distance in which the highest contaminant concentration decreases by 50%). A comparison of values for the east and west transects obtained in this study showed some small differences. For most components (exceptions are BZTs) the half distances were longer in the cast transect, suggesting additional sources of contaminants to that area. This may be due to several reasons including the influence of Newport effluents etc., different water circulation patterns in the two passages, and possible influences from Mount Hope Bay. Organic carbon had the longest half distance due to a large number of sources throughout the bay, and the BZTs had the lowest values since their only source is the Providence River via the Pawtuxct River. Finally, the PH Cs, P AHs. PCBs (sometimes measured as specific chlorobiphenyl (CB) cogeners) and coprostanol had similar half distances, suggesting major sources in the Providence River as well as smaller additional inputs throughout the bay. Five of the contaminants (CB 101, CB 138, PHCs, C10-BZT) showed significant correlations (95% confidence level or better) between sediment and clam concentrations, and all values decreased with distance from the Providence River. These sediment components are hydrophobic and are strongly partitioned into the clams\u27 lipids. Based on the data from this study, it may be possible to identify areas of the bay from which clams are harvested for commercial use. For example, clams suspected of being taken from areas closed to shellfishing could be analyzed for, these 5 contaminants and the results converted to sediment location using the relationships developed in this investigation. Trends from older investigations were generally similar to those observed in the present study; namely, highest concentrations in Providence River sediments and clams with decreasing amounts downbay. The range of previous values brackets those obtained in this study. Given then variations in station location, collection procedures, processing techniques and analytical methods, it is impossible to determine at the present time, if the concentrations have significantly changed over the past 15-20 years. Sediment Cores Highest levels and deepest penetration of PCBs (measured as CB 138) were in the Fox Point core which had a fairly uniform concentration down to 72 cm, but increased at 110 cm and remained about the same at the bottom of the core (147 cm). The other cores showed less penetration ranging from 42 cm (bottom of core) at Conimicut Point to 13 cm at Fields Point where the CB 138 values reached background (\u3c 0.1 ng/g) concentration. Apparently, the latter core site is a non-depositional area in contrast to Fox Point which has a relatively high sedimentation rate. The distribution of PHCs and pyrene were similar in some respects. In both cases, Fox Point had the highest level and deepest penetration with relatively constant values down to 147 cm. The PHCs never quite reached background levels in these cores (Ohio Ledge and Fields Point were the closest to background), but the pyrene did reach this level in two cores including the Fields Point core which again had the shallowest penetration (18 cm). Similar distributions were shown by COP and DEHP in that the Fox Point core had the highest levels and deepest penetration - a slight increase down to 110 cm followed by a prominent decrease to 147 cm. None of the cores reached background values for DEHP, but Ohio Ledge and Conimicut Point came very close. The COP reached background in only the Fields Point core but it rapidly increased again. It is impossible to adequately explain all of the trends in sediment core distributions with only the organic contaminant results. However, a detailed evaluation of all of the data (i.e., trace metals, organic components, biological species, pollen and geochemical analyses and radiometric dating) is currently being prepared in order to provide information on historical trends as recorded in the bay sediment cores (King et al., 1992). [Text taken from report summary.
    • …
    corecore