593 research outputs found
Explanation for Anomalous Shock Temperatures Measured by Neutron Resonance Spectroscopy
Neutron resonance spectrometry (NRS) has been used to measure the temperature
inside Mo samples during shock loading. The temperatures obtained were
significantly higher than predicted assuming ideal hydrodynamic loading. The
effect of plastic flow and non-ideal projectile behavior were assessed. Plastic
flow was calculated self-consistently with the shock jump conditions: this is
necessary for a rigorous estimate of the locus of shock states accessible.
Plastic flow was estimated to contribute a temperature rise of 53K compared
with hydrodynamic flow. Simulations were performed of the operation of the
explosively-driven projectile system used to induce the shock in the Mo sample.
The simulations predicted that the projectile was significantly curved on
impact, and still accelerating. The resulting spatial variations in load,
including radial components of velocity, were predicted to increase the
apparent temperature that would be deduced from the width of the neutron
resonance by 160K. These corrections are sufficient to reconcile the apparent
temperatures deduced using NRS with the accepted properties of Mo, in
particular its equation of state.Comment: near-final version, waiting for final consent from an autho
Flexible Power Modeling of LTE Base Stations
With the explosion of wireless communications in number of users and data rates, the reduction of network power consumption becomes more and more critical. This is especially true for base stations which represent a dominant share of the total power in cellular networks. In order to study power reduction techniques, a convenient power model is required, providing estimates of the power consumption in different scenarios. This paper proposes such a model, accurate but simple to use. It evaluates the base station power consumption for different types of cells supporting the 3GPP LTE standard. It is flexible enough to enable comparisons between state-of-the-art and advanced configurations, and an easy adaptation to various scenarios. The model is based on a combination of base station components and sub-components as well as power scaling rules as functions of the main system parameters
Free Rota-Baxter algebras and rooted trees
A Rota-Baxter algebra, also known as a Baxter algebra, is an algebra with a
linear operator satisfying a relation, called the Rota-Baxter relation, that
generalizes the integration by parts formula. Most of the studies on
Rota-Baxter algebras have been for commutative algebras. Two constructions of
free commutative Rota-Baxter algebras were obtained by Rota and Cartier in the
1970s and a third one by Keigher and one of the authors in the 1990s in terms
of mixable shuffles. Recently, noncommutative Rota-Baxter algebras have
appeared both in physics in connection with the work of Connes and Kreimer on
renormalization in perturbative quantum field theory, and in mathematics
related to the work of Loday and Ronco on dendriform dialgebras and
trialgebras.
This paper uses rooted trees and forests to give explicit constructions of
free noncommutative Rota--Baxter algebras on modules and sets. This highlights
the combinatorial nature of Rota--Baxter algebras and facilitates their further
study. As an application, we obtain the unitarization of Rota-Baxter algebras.Comment: 23 page
Lipid profile with eslicarbazepine acetate and carbamazepine monotherapy in adult patients with newly diagnosed focal seizures: post hoc analysis of a phase III trial and open-label extension study
BACKGROUND: Antiseizure medications can have negative effects on plasma lipid levels. OBJECTIVES: To evaluate plasma lipid changes in patients with newly diagnosed focal epilepsy treated with eslicarbazepine acetate (ESL) or controlled-release carbamazepine (CBZ-CR) monotherapy during a phase III, randomized, double-blind (DB) trial and 2 years of ESL treatment in an open-label extension (OLE). DESIGN: Post hoc analysis of a phase III trial and OLE study. METHODS": Proportions of patients with elevated levels of total cholesterol and low-density lipoprotein (LDL) cholesterol were assessed at DB baseline, OLE baseline (last visit of DB trial), and end of OLE. RESULTS: A total of 184 patients received ESL monotherapy during the OLE: 96 received ESL monotherapy in the DB trial and 88 patients received CBZ-CR monotherapy. The proportions of patients with elevated total cholesterol and LDL cholesterol increased significantly during the DB trial in those treated with CBZ-CR monotherapy [total cholesterol, +14.9% (p < 0.001); LDL cholesterol, +11.5% (p = 0.012)] but decreased significantly after switching to ESL monotherapy in the OLE [total cholesterol, −15.3% (p = 0.008); LDL cholesterol, −11.1% (p = 0.021)]. No significant changes were observed in those treated with ESL monotherapy during the DB trial and OLE. At the end of the DB trial, between-group differences (ESL–CBZ-CR) in the proportions of patients with elevated total and LDL cholesterol were −13.6% (p = 0.037) and −12.3% (p = 0.061), respectively; at the end of the OLE, these between-group differences were −6.0% (p = 0.360) and −0.6% (p = 1.000), respectively. CONCLUSION:A lower proportion of patients with newly diagnosed focal epilepsy had increased levels of total and LDL cholesterol, compared to baseline, following monotherapy with ESL versus CBZ-CR; after switching from CBZ-CR to ESL, the proportions of patients with increased levels decreased significantly. REGISTRATION: ClinicalTrials.gov NCT01162460/NCT02484001; EudraCT 2009-011135-13/2015-001243-36
Atrazine and Water Quality: An Evaluation of Restricting Atrazine Use on Corn and Sorghum to Postemergent Applications
Atrazine is the most widely used herbicide for corn and sorghum and the most commonly encountered in ground and surface water. In addition to water quality problems, atrazine poses hazards through atmospheric transport, food residues, and exposure of applications and wildlife. If atrazine use is restricted, substitute herbicides will come into wider use, increasing the likelihood of occurrence of their own sets of potentially undesirable side effects and imposing cost or efficacy penalties
The Middle Half Genome of Interferon-Inducing Porcine Reproductive and Respiratory Syndrome Virus Strain A2MC2 Is Essential for Interferon Induction
Recommended from our members
A plan for the development of superconducting Undulator prototypes for LCLS-II and future FELs
Undulators serve as the primary source of radiation for modern storage rings, and more recently for the advent of Free-Electron Lasers (FELs). The performance of future FELs can be greatly enhanced using the much higher magnetic fields of superconducting undulators (SCU) [1]. For example, the LCLS-II hard x-ray undulator can be shortened by up to 70 m using an SCU in place of a PMU (permanent magnet undulator), or its spectral performance can be critically improved when using a similar length. In addition, SCUs are expected to be orders of magnitude less sensitive to radiation dose; a major issue at LCLS-II with its 1-MHz electron bunch rate. We present a funded R&D collaboration between SLAC, ANL, and LBNL, which aims to demonstrate the viability of superconducting undulators for FELs by building, testing, measuring, and tuning two 1.5-m long planar SCU prototypes using two different technologies: NbTi at ANL and Nb Sn at LBNL. Our goal is to review and reassess the LCLS-II HXR baseline plans (PMU) in July of 2015, after the development and evaluation of both prototypes, possibly in favor of an SCU for LCLS-II.
Recommended from our members
The design of a liquid lithium lens for a muon collider
The last stage of ionization cooling for the muon collider requires a multistage liquid lithium lens. This system uses a large ({approximately}0.5 MA) pulsed current through liquid lithium to focus the beam while energy loss in the lithium removes momentum which is replaced by linacs. The beam optics are designed to maximize the 6 dimensional transmission from one lens to the next while minimizing emittance growth. The mechanical design of the lithium vessel is constrained by a pressure pulse due to the sudden ohmic heating, and the stress on the Be window. The authors describe beam optics, the liquid lithium pressure vessel, pumping, power supplies, as well as the overall optimization of the system
The impact of hyperactivity and leptin on recovery from anorexia nervosa
In anorexia nervosa (AN), hyperactivity is observed in about 80% of patients and has been associated with low leptin levels in the acute stage of AN and in anorexia animal models. To further understand the importance of this correlation in AN, we investigated the relationship between hypoleptinaemia and hyperactivity in AN patients longitudinally and assessed their predictive value for recovery
- …