882 research outputs found

    Low cost filter for trickle irrigation

    Get PDF
    CLEAR water is essential for a successful trickle irrigation scheme. Most water sources are not sufficiently clean and some form of filtration is necessary

    The Design of the Pallet Program

    Get PDF
    This paper describes the procedures underlying the development of the Pallet program which has been produced to design regular pallet racks according to the FEM code. The program determines the buckling load of the equivalent free sway structure and, using stability functions, calculates the axial and shear forces and the bending moments within the structure including the non-linear P - Δ effects. Twelve different combinations of load are analysed and design checks given in the FEM code applied. The paper discusses the different modes of operation of the program. Finally the accuracy of the program is discussed together with future developments

    Rotational Stiffnesses of Semi-rigid Baseplates

    Get PDF
    The paper describes a test procedure to determine the rotational stiffnesses and moment-curvature relationships of semi-rigid baseplates of cold-formed structures. The influence of the modulus of the foundation subgrade on baseplate performance is determined. Increasing the axial load applied to a baseplate is shown to increase the ultimate moment-rotation capacity of a baseplate

    Experimental Procedures for Stub Column Tests

    Get PDF
    In this paper a total of 36 stub columns was tested by two different experimental procedures, namely the FEM and AISI procedures, to investigate the difference in the ultimate load between these procedures. Of these 26 were carried out in the pin-ended condition according to FEM, the rest were in the fixed-end condition according to AlSI specification. It is shown that the failure loads obtained by the two experimental procedures were very close to each other. Both procedures worked well. The AISI procedure is recommended as the standard procedure

    Shear Stiffness of Pallet Rack Upright Frames

    Get PDF
    PaIIet racks, often fabricated using cold-formed steel, are used for the storage of goods. Uprights of these racks are braced in the cross-aisle direction forming a frame, which behaves like a built-up column. Evaluation of the shear stiffness of this frame is needed to determine the buckling load. Currently two approaches prevail in the rack industry to determine the shear stiffness. The RMI code uses a theoretical formula and the FEM code requires testing. There is a considerable difference in the stiffness values determined by two approaches. The present paper describes experimental and numerical studies conducted at Oxford Brookes University to evaluate shear stiffness in an ongoing research project

    Cross-aisle Stiffness Tests on Rack Upright Frames

    Get PDF
    The US Rack Manufacturers Institution (RMI) code uses a theoretical formula derived by Timoshenko and the new Eurocode EN15512 requires testing. There is a considerable difference in the stiffn ess values determined by two approaches. This paper describes the experiments conducted on 80 full sized upright frames at Oxford Brookes University varying upright size, number of panels in the frame, aspect ratio of the panel (panel length/depth), restraints at the intermediate nodes of the frame, loading pattern, lacing pattern (channels back to back or front to front) and bolt tightness. The experimental data reported can be used in proposing revised design procedures

    Pink Lady & Sundowner apples

    Get PDF
    This bulletin summaries for all Australian growers the present technical information concerning Pink Lady and Sundownerhttps://researchlibrary.agric.wa.gov.au/bulletins/1273/thumbnail.jp

    Quality and Severity of Lower Urinary Tract Symptoms among African American Elders

    Full text link
    Lack of population-based data on lower urinary tract symptoms (LUTS) among African American men represents a significant gap in understanding. This study examined LUTS among a racially over-sampled, mixed urban/rural, elderly cohort of African Americans and whites in the South to discern whether racial differences exist in the prevalence, severity, and associated risk factors of LUTS. Longitudinal analyses using generalized estimating equations (GEE) were conducted on the 1994–1998 EPESE dataset for 5 North Carolina counties. In 1994, the analytic cohort included 482 African Americans and 407 whites; by 1998, 249 and 222, respectively. In 1994, 49.4% of African Americans reported LUTS compared to 56.8% of whites. By 1998, percentages increased to 60.6% and 70.3%, respectively. LUTS was associated with being African American, married, having poor health status and disability, delaying care quite often, being in a nursing home or in a rural area, and having a male physician

    Seasonal changes in basking shark vertical space-use in the north-east Atlantic

    Get PDF
    This is the final version. Available on open access from Springer via the DOI in this recordMobile marine species can exhibit vast movements both horizontally and vertically. Spatial analysis of vertical movements may help improve an understanding of the processes that influence space-use. Previously, vertical space-use of basking sharks (Cetorhinus maximus) in the north-east Atlantic described movements largely within waters of the continental shelf during summer and autumn months, with few records of detailed vertical behaviour during winter. We use archival satellite telemetry data from 32 basking sharks (twelve females, six males, and fourteen of unknown sex measuring 4-5 m (n = 6), 5-6 m (n = 10), 6-7 m (n = 7), 7-8 m (n = 8), and 8-9 m (n = 1) estimated total length) tracked over four years (2012-2015). The satellite tags provided depth and temperature data for a cumulative 4,489 days (mean 140 ± 97 days per shark, range: 10-292 days) in order to describe vertical space-use and thermal range of basking sharks in the north-east Atlantic. Basking sharks exhibit seasonality in vertical space-use, revealing repeated ‘yo-yo’ movement behaviour with periods of occupancy at depths greater than 1,000 metres in late winter/early spring. Describing seasonal vertical space-use in marine megavertebrates can increase knowledge of movements throughout their environment including physiological and morphological constraints to movement, nutrient transfer, and overlap with anthropogenic threats in order to inform future conservation strategies.Scottish Natural HeritageUniversity of ExeterNER
    corecore