Impact of monopolar radiofrequency energy on subchondral bone viability

The purpose of this study was to analyze the impact of monopolar radiofrequency energy treatment on subchondral bone viability. The femoral grooves of six chinchilla bastard rabbits were exposed bilaterally to monopolar radiofrequency energy for 2, 4 and 8 s, creating a total of 36 defects. An intravital fluorescence bone-labeling technique characterized the process of subchondral bone mineralization within the 3 months following exposure to radiofrequency energy and was analyzed by widefield epifluorescence optical sectioning microscopy using an ApoTome. After 2 s of radiofrequency energy exposure, regular fluorescence staining of the subchondral bone was evident in all samples when compared to untreated areas. The depth of osteonecrosis after 4 and 8 s of radiofrequency energy treatment averaged 126 and 942 µm at 22 days (P < .05; P < .01). The 4 s treatment group showed no osteonecrosis after 44 days whereas the depth of osteonecrosis extended from 519 µm at 44 days (P < .01), to 281 µm at 66 days (P < .01) and to 133 µm at 88 days (P < .05) after 8 s of radiofrequency energy application. Though radiofrequency energy may induce transient osteonecrosis in the superficial zone of the subchondral bone, the results of this study suggest that post-arthroscopic osteonecrosis appears to be of only modest risk given the current clinical application in humans

A novel Alzheimer disease locus located near the gene encoding tau protein

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this recordAPOE ε4, the most significant genetic risk factor for Alzheimer disease (AD), may mask effects of other loci. We re-analyzed genome-wide association study (GWAS) data from the International Genomics of Alzheimer's Project (IGAP) Consortium in APOE ε4+ (10 352 cases and 9207 controls) and APOE ε4- (7184 cases and 26 968 controls) subgroups as well as in the total sample testing for interaction between a single-nucleotide polymorphism (SNP) and APOE ε4 status. Suggestive associations (P<1 × 10-4) in stage 1 were evaluated in an independent sample (stage 2) containing 4203 subjects (APOE ε4+: 1250 cases and 536 controls; APOE ε4-: 718 cases and 1699 controls). Among APOE ε4- subjects, novel genome-wide significant (GWS) association was observed with 17 SNPs (all between KANSL1 and LRRC37A on chromosome 17 near MAPT) in a meta-analysis of the stage 1 and stage 2 data sets (best SNP, rs2732703, P=5·8 × 10-9). Conditional analysis revealed that rs2732703 accounted for association signals in the entire 100-kilobase region that includes MAPT. Except for previously identified AD loci showing stronger association in APOE ε4+ subjects (CR1 and CLU) or APOE ε4- subjects (MS4A6A/MS4A4A/MS4A6E), no other SNPs were significantly associated with AD in a specific APOE genotype subgroup. In addition, the finding in the stage 1 sample that AD risk is significantly influenced by the interaction of APOE with rs1595014 in TMEM106B (P=1·6 × 10-7) is noteworthy, because TMEM106B variants have previously been associated with risk of frontotemporal dementia. Expression quantitative trait locus analysis revealed that rs113986870, one of the GWS SNPs near rs2732703, is significantly associated with four KANSL1 probes that target transcription of the first translated exon and an untranslated exon in hippocampus (P≤1.3 × 10-8), frontal cortex (P≤1.3 × 10-9) and temporal cortex (P≤1.2 × 10-11). Rs113986870 is also strongly associated with a MAPT probe that targets transcription of alternatively spliced exon 3 in frontal cortex (P=9.2 × 10-6) and temporal cortex (P=2.6 × 10-6). Our APOE-stratified GWAS is the first to show GWS association for AD with SNPs in the chromosome 17q21.31 region. Replication of this finding in independent samples is needed to verify that SNPs in this region have significantly stronger effects on AD risk in persons lacking APOE ε4 compared with persons carrying this allele, and if this is found to hold, further examination of this region and studies aimed at deciphering the mechanism(s) are warranted

Posterolateral corner of the knee: a systematic literature review of current concepts of arthroscopic reconstruction

Introduction!#!Injuries of the posterolateral corner (PLC) of the knee lead to chronic lateral and external rotational instability and are often associated with PCL injuries. Numerous surgical techniques for repair and reconstruction of the PLC are established. Recently, several arthroscopic techniques have been published in order to address different degrees of PLC injuries through reconstruction of one or more functional structures. The purpose of this systematic review is to give an overview about arthroscopic techniques of posterolateral corner reconstructions and to evaluate their safeness.!##!Materials and methods!#!A systematic review of the literature on arthroscopic reconstructions of the posterolateral corner of the knee according to the PRISMA guidelines was performed using PubMed MEDLINE and Web of Science Databases on June 15th, 2020. Inclusion criteria were descriptions of surgical techniques to reconstruct different aspects of the posterolateral corner either strictly arthroscopically or minimally-invasive with an arthroscopic assistance.!##!Results!#!Arthroscopic techniques differ with regard to the extent of reconstructed units (popliteus tendon, popliteofibular ligament, lateral collateral ligament), surgical approach (transseptal, lateral) and biomechanical results (anatomic vs. non-anatomic reconstruction, restoration of rotational instability and/or lateral instability).!##!Conclusion!#!Different approaches to arthroscopic PLC reconstruction are presented, yet clinical results are scarce. Up to now good and excellent clinical results are reported. No major complications are reported in the literature so far

Sequential osseointegration from osseohealing to osseoremodeling - Histomorphological comparison of novel 3D porous and solid Ti-6Al-4V titanium implants

In the present study, we analyzed the histological characteristics of osseointegration of an open-porous Ti-6Al-4V material that was produced in a space holder method creating a 3-D through-pores trabecular design that mimics the inhomogeneity and size relationships of trabecular bone in macro- as well as microstructure. Pairs of cylindrical implants with a porosity of 49% and an average pore diameter of 400 µm (PI) or equal sized solid, corundum blasted devices (SI) as reference were bilaterally implanted press fit in the lateral condyles of 16 rabbits. Histological examination was performed after 4 weeks of short-term osseohealing and 12 weeks of mid-term osseoremodeling and we summarized the criteria for sequential osseointegration. After 4 weeks, osteoid had already been largely replaced by mineralized woven bone in both types of implants but was only represented to a greater extent in the deeper pores of PI. The cortical as well as trabecular region showed regular osseohealing with excessive and spatially undirected formation of immature woven bone. A dense bone mass was found in the cortical area, while in the trabecular region the bone mass was reduced distinctly, presenting large lacuna-like recesses and a demarcating trabecular structure. The pores near the implant surface contained more mineralized woven bone than the deeper pores. After 12 weeks, the osseoremodeling was largely completed with a physiological maturation to lamellar bone. The newly formed bone mass increased for PI and SI compared to the 4-week group and osteoid was only detectable in the deeper pores. The inhomogeneous trabecular design of the pores enables an excellent ingrowth of mineralized lamellar bone after remodeling to a pore depth of 1800 µm, which proves a functional load transfer from the surrounding bone into the implant. According to the concept of osseointegration by Branemark and Albrektsson, the histological evaluation confirms a successful, superior osseointegration of the presented porous properties improving long-term implant stability. The presented study protocol allows an excellent evaluation and comparison of the sequential osseointegration from short-term osseohealing to midterm osseoremodeling

Osseointegration of a novel 3D porous Ti-6Al-4V implant material – Histomorphometric analysis in rabbits

Porous structure properties are known to conduct initial and long-term stability of titanium alloy implants. This study aims to assess the histomorphometric effect of a 3-D porosity in Ti-6Al-4V implants (PI) on osseointegration in comparison to solid Ti-6Al-4V implants (SI). The PI was produced in a spaceholder method and sintering and has a pore size of mean 400 µm (50 µm to 500 µm) and mimics human trabecular bone. Pairs of PI and equal sized SI as reference were bilaterally implanted at random in the lateral femoral condyle of 16 Chinchilla-Bastard rabbits. The animals were sacrificed after 4 and 12 weeks for histomorphometric analysis. The histomorphometric evaluation confirmed a successful short-term osseohealing (4 weeks) and mid-term osseoremodeling (12 weeks) for both types of implants. The total newly formed bone area was larger for PI than for SI after 4 and 12 weeks, with the intraporous bone area being accountable for the significant difference (p<0.05). A more detailed observation of bone area distribution revealed a bony accumulation in a radius of ±500 µm around the implant surface after remodeling. The boneto-implant contact (BIC) increased significantly (p<0.05) from 4 to 12 weeks (PI 26.23% to 42.68%; SI 28.44% to 47.47%) for both types of implants. Due to different surface properties, however, PI had a significant (p<0.05) larger absolute osseous contact (mm) to the implant circumference compared to the SI (4 weeks: 7.46 mm vs 5.72 mm; 12 weeks: 11.57 mm vs 9.52 mm [PI vs. SI]). The regional influences (trabecular vs. cortical) on bone formation and the intraporous distribution were also presented. Conclusively, the porous structure and surface properties of PI enable a successful and regular osseointegration and enhance the bony fixation compared to solid implants under experimental conditions

Preoperative medial knee instability is an underestimated risk factor for failure of revision ACL reconstruction

Purpose!#!The purpose of this study was to carefully analyse the reasons for revision ACLR failure to optimize the surgical revision technique and minimize the risk of recurrent re-rupture. Large studies with a minimum of 2 years of follow-up that clinically examine patients with revision ACLR are rare.!##!Methods!#!Between 2013 and 2016, 111 patients who underwent revision ACLR were included in the retrospective study. All patients were examined for a minimum of 2 years after revision surgery (35 ± 3.4 months, mean ± STD) and identified as 'failed revision ACLR' (side-to-side difference ≥ 5 mm and pivot-shift grade 2/3) or 'stable revision ACLR'.!##!Results!#!Failure after revision ACLR occurred in 14.5% (n = 16) of the cases. Preoperative medial knee instability (n = 36) was associated with failure; thus, patients had a 17 times greater risk of failure when medial knee instability was diagnosed (p = 0.015). The risk of failure was reduced when patients had medial stabilization (n = 24, p = 0.034) and extra-articular lateral tenodesis during revision surgery (n = 51, p = 0.028). Increased posterior tibial slope (n = 11 ≥ 12°, p = 0.046) and high-grade anterior knee laxity (side-to-side difference &amp;gt; 6 mm and pivot-shift grade 3, n = 41, p = 0.034) were associated with increased failure of revision ACLR. Obese patients had a 9 times greater risk of failure (p = 0.008, n = 30).!##!Conclusion!#!This study demonstrates the largest revision ACLR patient group with pre- and postoperative clinical examination data and a follow-up of 2 years published to date. Preoperative medial knee instability is an underestimated risk factor for revision ACLR failure. Additionally, high-grade anterior knee laxity, increased PTS and high BMI are risk factors for failure of revision ACLR, while additional medial stabilization and lateral extra-articular tenodesis reduce the risk of failure.!##!Level of evidence!#!III