166 research outputs found
Flow control for skin friction drag reduction based on sensing of the streamwise wall-shear stress
Heat transfer and pressure drop correlations for laminar flow in an in-line and staggered array of circular cylinders
Enhanced heat transfer surfaces based on cylindrically shaped pin fins with wire diameters in the range of 100 µm were analyzed. The design is based on a high pin length to diameter ratio in the range of 20–100. Correlations for thermal and fluid dynamic characteristics of these fine wire structures are not available in literature. An in-line and staggered arrangement of pins were simulated for a variety of operational and geometrical conditions with a twodimensional computational thermal and fluid dynamics model. Correlations for Nusselt number and friction factor with respect to Reynolds number and geometry were derived thereby. Reynolds numbers based on the wire diameter are in the range of 3–60. The correlations for the Nusselt number and friction factor can predict 93% and 97% of the simulated data within ±10%
Numerical simulation of the turbulent convective buoyant flow of sodium over a backward- facing step
A forced convective and a buoyancy-aided turbulent liquid sodium flow over a backward-facing step with a constant heat flux applied on the indented wall is simulated. Linear eddy viscosity models are used for the Reynolds stresses. Turbulent heat fluxes are modelled with a single gradient diffusion hypotheses with two different approaches to evaluate the turbulent Prandtl number. Moreover, the inuence of turbulence on heat transfer to sodium is also assessed through simulations with zero turbulent thermal diffusivity. The results are compared with DNS data from literature. The velocity and turbulent kinetic energy profiles predicted by all models are in good agreement with the DNS data. The local Nusselt number trend is qualitatively well captured, however, its magnitude is underestimated by all models for the mixed convection case. For forced convection, the heat transfer is overestimated by all heat flux models. The simulation with neglected turbulent heat transfer shows the best overall agreement for the forced convection case. For the mixed convection best agreement is obtained using a correlation to locally evaluate the turbulent thermal diffusivity
Numerical Simulation of Turbulent Duct Flows with Constant Power Input
The numerical simulation of a flow through a duct requires an externally specified forcing that makes the fluid flow against viscous friction. To this end, it is customary to enforce a constant value for either the flow rate (CFR) or the pressure gradient (CPG). When comparing a laminar duct flow before and after a geometrical modification that induces a change of the viscous drag, both approaches lead to a change of the power input across the comparison. Similarly, when carrying out direct numerical simulation or large-eddy simulation of unsteady turbulent flows, the power input is not constant over time. Carrying out a simulation at constant power input (CPI) is thus a further physically sound option, that becomes particularly appealing in the context of flow control, where a comparison between control-on and control-off conditions has to be made. We describe how to carry out a CPI simulation, and start with defining a new power-related Reynolds number, whose velocity scale is the bulk flow that can be attained with a given pumping power in the laminar regime. Under the CPI condition, we derive a relation that is equivalent to the Fukagata-Iwamoto-Kasagi relation valid for CFR (and to its extension valid for CPG), that presents the additional advantage of naturally including the required control power. The implementation of the CPI approach is then exemplified in the standard case of a plane turbulent channel flow, and then further applied to a flow control case, where a spanwise-oscillating wall is used for skin-friction drag reduction. For this low-Reynolds-number flow, using 90% of the available power for the pumping system and the remaining 10% for the control system is found to be the optimum share that yields the largest increase of the flow rate above the reference case where 100% of the power goes to the pump
Numerical simulation of the turbulent convective buoyant flow of sodium over a backward- facing step
A forced convective and a buoyancy-aided turbulent liquid sodium flow over a
backward-facing step with a constant heat flux applied on the indented wall is simulated.
Linear eddy viscosity models are used for the Reynolds stresses. Turbulent heat fluxes are
modelled with a single gradient diffusion hypotheses with two different approaches to evaluate
the turbulent Prandtl number. Moreover, the influence of turbulence on heat transfer to sodium
is also assessed through simulations with zero turbulent thermal diffusivity. The results are
compared with DNS data from literature. The velocity and turbulent kinetic energy profiles
predicted by all models are in good agreement with the DNS data. The local Nusselt number
trend is qualitatively well captured, however, its magnitude is underestimated by all models
for the mixed convection case. For forced convection, the heat transfer is overestimated by all
heat flux models. The simulation with neglected turbulent heat transfer shows the best overall
agreement for the forced convection case. For the mixed convection best agreement is obtained
using a correlation to locally evaluate the turbulent thermal diffusivity
- …